Elsner 71802 Cala 101 T KNX sec black room temperature controller
|
159,70 EUR |
|||||||||||
|
( 190,04 EUR incl. VAT ) ≈ £133.03 | ≈ $175.19 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 2035927 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 71802 | ||||||||||
| UPC/EAN: | 4051996718024 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 71802 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 71802:
Room temperature controller with integrated temperature sensor measures ambient temperature in the range of 5 °C to +60 °C. The measured temperature can be combined with external measurements via the KNX bus to create a mixed value, the proportion of which can be set in percentage terms. This allows flexible adaptation to different room conditions and improves control accuracy. The display shows either the actual temperature, the setpoint, or the base setpoint offset, depending on configuration.
Functions and equipment in detail include two touch buttons with "+" and "-" symbols, allowing the user to interactively adjust the setpoint temperature. Operation is without mechanical buttons, protecting the surface and enabling a modern design. The device supports control based on separate setpoints or a base setpoint, making it flexible for various application scenarios. Communication takes place over the KNX network via medium TP1-256, using the S-Mode configuration mode. The maximum number of group addresses and assignments is 500 each, and 46 communication objects are available.
Technology explained simply shows that the device operates at a nominal voltage of 30 V DC SELV and has a maximum current consumption of 19 mA. Power supply is via the KNX bus, with power delivery through the network cable (PoE). The KNX plug terminal allows connection of conductors with a diameter of Ø 0.8 mm s and a stripping length of 5 mm. After interruption of the bus voltage, it takes approximately 5 seconds for the device to resume data reception. The electrical ratings correspond to overvoltage category III and pollution degree 2, confirming suitability for indoor use with normal pollution.
Compatibility and accessories include use in KNX networks with encrypted communication via KNX Secure, providing higher data security and protection against manipulation. The device includes a mounting ring and a KNX plug terminal in the delivery scope. The installation manual and handbook are available in multiple languages (German, English, French, Italian, Spanish), with the handbook available as a download. Additionally, a product file is available as a download.
Mounting and installation is carried out in standard distribution boxes with a mounting depth of 7 mm. Dimensions are 55 mm (width) × 55 mm (height) × 35 mm (depth), with an approximate total weight of 45 g. The housing is made of real glass, plastic, and metal and is available in the colors RAL 9010 (white) and RAL 9005 (black). The protection rating IP20 safeguards against finger contact and solid foreign objects, but not against water or dust. The ambient temperature for operation ranges from 5 °C to +45 °C, with relative humidity from 0 to 95 %, provided no condensation occurs. Storage temperature is 25 °C to +70 °C.
Advantages in operation include easy operation via touch buttons, flexible control options, and secure communication via KNX Secure. Integration into existing KNX systems requires no additional hardware, as the device supports standard protocol functions. The display of temperature values in white-illuminated digits ensures good readability, even in poorly lit rooms. The combination of local measurement and external values enables precise and adaptable room climate control.
| General | |
| Housing | real glass, plastic, metal |
| Housing colour (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 55 mm × 55 mm × 35 mm |
| Installation depth | 7 mm |
| Weight total | ≈ 45 g |
| Ambient temperature | 5…+45 °C |
| rF (relative humidity) non-condensing | 0...95 % |
| Storage temperature | 25...+70 °C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 500 |
| Maximum assignments | 500 |
| Communication objects | 46 |
| Nominal voltage | 30 V DV SELV |
| Electricity consumption | ≤ 19 mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0.8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensors | |
| Temperature measurement range | 5…+60 °C |
Questions & answers
What is the delivery time of Elsner 71802 Cala 101 T KNX sec black room temperature controller?
The article Elsner 71802 Cala 101 T KNX sec black room temperature controller is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 71802 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 71802 Cala 101 T KNX sec black room temperature controller always at the best possible price. We can give you a discount of 2% on Elsner 71802 Cala 101 T KNX sec black room temperature controller if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 71802 Cala 101 T KNX sec black room temperature controller we can offer you a price of 157,30 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

