Elsner 71802, EAN: 4051996718024

Elsner 71802 room temperature controller black

Elsner 71802 room temperature controller black

Lieske Part No. 2035927
Mfg Part No 71802
EAN-Code 4051996718024
Manufacturer Elsner
Here only 159,70 EUR
190,04 EUR incl. VAT

Further information for Elsner 71802 room temperature controller black

General
Housingreal glass, plastic, metal
Housing colour (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H × D)55 mm × 55 mm × 35 mm
Installation depth7 mm
Weight total≈ 45 g
Ambient temperature5…+45 °C
rF (relative humidity) non-condensing0...95 %
Storage temperature25...+70 °C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses500
Maximum assignments500
Communication objects46
Nominal voltage30 V DV SELV
Electricity consumption≤ 19 mA
Connection KNX plug-in terminal conductor diameterØ 0.8 mm s
Connection KNX plug-in terminal stripping length5 mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
Temperature measurement range5…+60 °C
The room temperature controller Cala 101 T KNX sec from Elsner is an integrated control device for KNX building bus systems, measuring room temperature and displaying it via a digital display with white-illuminated digits. The device is designed for flush installation in standard distribution boxes and seamlessly integrates into existing switch rows using an appropriate frame. It serves as a main controller or secondary controller in heating and air conditioning systems, enabling precise control of heating and cooling processes via a PI controller configurable for both single- and two-stage systems.

Room temperature controller with integrated temperature sensor measures ambient temperature in the range of 5 °C to +60 °C. The measured temperature can be combined with external measurements via the KNX bus to create a mixed value, the proportion of which can be set in percentage terms. This allows flexible adaptation to different room conditions and improves control accuracy. The display shows either the actual temperature, the setpoint, or the base setpoint offset, depending on configuration.

Functions and equipment in detail include two touch buttons with "+" and "-" symbols, allowing the user to interactively adjust the setpoint temperature. Operation is without mechanical buttons, protecting the surface and enabling a modern design. The device supports control based on separate setpoints or a base setpoint, making it flexible for various application scenarios. Communication takes place over the KNX network via medium TP1-256, using the S-Mode configuration mode. The maximum number of group addresses and assignments is 500 each, and 46 communication objects are available.

Technology explained simply shows that the device operates at a nominal voltage of 30 V DC SELV and has a maximum current consumption of 19 mA. Power supply is via the KNX bus, with power delivery through the network cable (PoE). The KNX plug terminal allows connection of conductors with a diameter of Ø 0.8 mm s and a stripping length of 5 mm. After interruption of the bus voltage, it takes approximately 5 seconds for the device to resume data reception. The electrical ratings correspond to overvoltage category III and pollution degree 2, confirming suitability for indoor use with normal pollution.

Compatibility and accessories include use in KNX networks with encrypted communication via KNX Secure, providing higher data security and protection against manipulation. The device includes a mounting ring and a KNX plug terminal in the delivery scope. The installation manual and handbook are available in multiple languages (German, English, French, Italian, Spanish), with the handbook available as a download. Additionally, a product file is available as a download.

Mounting and installation is carried out in standard distribution boxes with a mounting depth of 7 mm. Dimensions are 55 mm (width) × 55 mm (height) × 35 mm (depth), with an approximate total weight of 45 g. The housing is made of real glass, plastic, and metal and is available in the colors RAL 9010 (white) and RAL 9005 (black). The protection rating IP20 safeguards against finger contact and solid foreign objects, but not against water or dust. The ambient temperature for operation ranges from 5 °C to +45 °C, with relative humidity from 0 to 95 %, provided no condensation occurs. Storage temperature is 25 °C to +70 °C.

Advantages in operation include easy operation via touch buttons, flexible control options, and secure communication via KNX Secure. Integration into existing KNX systems requires no additional hardware, as the device supports standard protocol functions. The display of temperature values in white-illuminated digits ensures good readability, even in poorly lit rooms. The combination of local measurement and external values enables precise and adaptable room climate control.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035927
qrcode für Elsner 71802 room temperature controller black