Elsner 71290 Windancer basic W KNX sec white wind sensor
|
263,41 EUR |
|||||||||||
|
( 313,46 EUR incl. VAT ) ≈ £219.42 | ≈ $288.96 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 2035919 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 71290 | ||||||||||
| UPC/EAN: | 4051996712909 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 71290 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 71290:
Applications
The sensor is designed for use in buildings where automated response to wind conditions is required. Typical applications include controlling ventilation systems, switching off outdoor blinds or awnings in windy conditions, or integrating into security systems that trigger alarms at high wind speeds. Measurement is performed using a stable cup anemometer, capable of detecting wind speeds up to 200 km/h under laboratory conditions. Measured values are displayed in m/s, km/h, and Beaufort, with the measurement range at +25 °C being between 2 m/s and 25 m/s.
Functions and Features in Detail
The sensor features 4 threshold-dependent switching outputs that can be configured in the ETS application. These outputs enable flexible control of devices in the KNX system, depending on the measured wind values. Using 8 AND and 8 OR logic gates, each with 4 inputs, states can be logically linked. Inputs for the logic gates can include both switching events and 16 logic inputs in the form of communication objects. Each gate output can be configured as either 1 bit or 2 x 8 bits. Thresholds can be set via parameters or communication objects. The Live Data Adjustment function allows the current measured value to be set as a threshold via a communication object.
Technology Explained Simply
The sensor communicates via the KNX system using TP1-256 as the transmission medium. The configuration mode is S-Mode, enabling standardized configuration via ETS software. The maximum number of group addresses and assignments is 2300 each, with 121 communication objects available. Power consumption is 5.5 mA. Connection is made via a KNX plug-in terminal, designed for conductor diameters of Ø 0.6 to 0.8 mm s. The stripping length is 5 mm. After a bus voltage recovery, data reception resumes after 5 seconds. Communication occurs via KNX Data Secure with an extended peer-to-peer key table, enabling secure communication with up to 1,000 KNX Data Secure participants. The intuitive parameterization interface supports Smart Linking Ready, context help, and semantic information.
Compatibility and Accessories
The wind sensor is designed for the KNX system and can be connected to other KNX devices within a building bus network. Optional extensions are available, including extensions L, Flex L, Flex S, Fix, and Fix P (item numbers 30112 to 30129), enabling adaptable mounting. The delivery includes the wind sensor, a KNX plug-in terminal, and an installation manual in German, English, French, Italian, and Spanish. A handbook and application are available for download.
Installation and Mounting
Mounting is either surface-mounted or mast-mounted. The plug-in terminal enables a simple and secure connection to the KNX bus. Connection cables must have a conductor diameter of Ø 0.6 to 0.8 mm s, with a stripping length of 5 mm required. Installation is carried out according to the installation manual, which describes the necessary steps for setup and configuration in the ETS system.
Operational Advantages
The sensor provides reliable and precise wind measurement with a clear interface to the KNX system. Integrated logic functions enable flexible and individual control of system components. Secure communication via KNX Data Secure ensures data integrity. Intuitive operation and support for Smart Linking Ready simplify configuration and maintenance. The ability to dynamically adjust thresholds via communication objects increases operational flexibility.
| General | |
| Housing material | Plastic |
| Colour | white • dark grey (RAL 7043) |
| Mounting method | Surface or mast mounting |
| Degree of protection | IP44 |
| Dimensions (W × H × D) | 113 mm × 88 mm × 208 mm |
| Weight total | 230 g |
| Ambient temperature | 25 ... 50°C |
| Storage temperature | 30 ... 70°C |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2300 |
| Maximum assignments | 2300 |
| Communication objects | 121 |
| Electricity consumption | 5,5 mA |
| Connection | KNX plug-in terminal |
| Conductor diameter | Ø 0,6...0,8 mm s |
| Strip length | 5 mm |
| Time until data reception after bus voltage recovery | 5 s |
| Sensors | |
| Wind speed measurement range at +25°C | 2 m/s ... 25 m/s |
Questions & answers
What is the delivery time of Elsner 71290 Windancer basic W KNX sec white wind sensor?
The article Elsner 71290 Windancer basic W KNX sec white wind sensor is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 71290 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 71290 Windancer basic W KNX sec white wind sensor always at the best possible price. We can give you a discount of 2% on Elsner 71290 Windancer basic W KNX sec white wind sensor if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Elsner 71290 Windancer basic W KNX sec white wind sensor we can offer you a price of 259,46 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

