Elsner 71290, EAN: 4051996712909

Elsner 71290 wind sensor Windancer basic W KNX sec white

Elsner 71290 wind sensor Windancer basic W KNX sec white

Lieske Part No. 2035919
Mfg Part No 71290
EAN-Code 4051996712909
Manufacturer Elsner
Here only 263,41 EUR
313,46 EUR incl. VAT

Further information for Elsner 71290 wind sensor Windancer basic W KNX sec white

General
Housing materialPlastic
Colourwhite • dark grey (RAL 7043)
Mounting methodSurface or mast mounting
Degree of protectionIP44
Dimensions (W × H × D)113 mm × 88 mm × 208 mm
Weight total230 g
Ambient temperature25 ... 50°C
Storage temperature30 ... 70°C
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses2300
Maximum assignments2300
Communication objects121
Electricity consumption5,5 mA
ConnectionKNX plug-in terminal
Conductor diameterØ 0,6...0,8 mm s
Strip length5 mm
Time until data reception after bus voltage recovery5 s
Sensors
Wind speed measurement range at +25°C2 m/s ... 25 m/s
The Windancer basic W KNX sec wind sensor from Elsner is a device for measuring wind speed within a KNX building bus system. It is used for monitoring and controlling outdoor installations, for example, to switch off ventilation systems or sun protection systems when exposed to strong wind. The device is available in white and dark grey (RAL 7043) and can be mounted either surface-mounted or mast-mounted. The housing is made of plastic and offers an IP44 protection rating, providing a certain level of protection against splashing water and dust. Dimensions are 113 mm (width) × 88 mm (height) × 208 mm (depth), with a total weight of 230 g. The operating ambient temperature ranges from 25 °C to 50 °C, and the storage temperature ranges from 30 °C to 70 °C.

Applications

The sensor is designed for use in buildings where automated response to wind conditions is required. Typical applications include controlling ventilation systems, switching off outdoor blinds or awnings in windy conditions, or integrating into security systems that trigger alarms at high wind speeds. Measurement is performed using a stable cup anemometer, capable of detecting wind speeds up to 200 km/h under laboratory conditions. Measured values are displayed in m/s, km/h, and Beaufort, with the measurement range at +25 °C being between 2 m/s and 25 m/s.

Functions and Features in Detail

The sensor features 4 threshold-dependent switching outputs that can be configured in the ETS application. These outputs enable flexible control of devices in the KNX system, depending on the measured wind values. Using 8 AND and 8 OR logic gates, each with 4 inputs, states can be logically linked. Inputs for the logic gates can include both switching events and 16 logic inputs in the form of communication objects. Each gate output can be configured as either 1 bit or 2 x 8 bits. Thresholds can be set via parameters or communication objects. The Live Data Adjustment function allows the current measured value to be set as a threshold via a communication object.

Technology Explained Simply

The sensor communicates via the KNX system using TP1-256 as the transmission medium. The configuration mode is S-Mode, enabling standardized configuration via ETS software. The maximum number of group addresses and assignments is 2300 each, with 121 communication objects available. Power consumption is 5.5 mA. Connection is made via a KNX plug-in terminal, designed for conductor diameters of Ø 0.6 to 0.8 mm s. The stripping length is 5 mm. After a bus voltage recovery, data reception resumes after 5 seconds. Communication occurs via KNX Data Secure with an extended peer-to-peer key table, enabling secure communication with up to 1,000 KNX Data Secure participants. The intuitive parameterization interface supports Smart Linking Ready, context help, and semantic information.

Compatibility and Accessories

The wind sensor is designed for the KNX system and can be connected to other KNX devices within a building bus network. Optional extensions are available, including extensions L, Flex L, Flex S, Fix, and Fix P (item numbers 30112 to 30129), enabling adaptable mounting. The delivery includes the wind sensor, a KNX plug-in terminal, and an installation manual in German, English, French, Italian, and Spanish. A handbook and application are available for download.

Installation and Mounting

Mounting is either surface-mounted or mast-mounted. The plug-in terminal enables a simple and secure connection to the KNX bus. Connection cables must have a conductor diameter of Ø 0.6 to 0.8 mm s, with a stripping length of 5 mm required. Installation is carried out according to the installation manual, which describes the necessary steps for setup and configuration in the ETS system.

Operational Advantages

The sensor provides reliable and precise wind measurement with a clear interface to the KNX system. Integrated logic functions enable flexible and individual control of system components. Secure communication via KNX Data Secure ensures data integrity. Intuitive operation and support for Smart Linking Ready simplify configuration and maintenance. The ability to dynamically adjust thresholds via communication objects increases operational flexibility.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035919
qrcode für Elsner 71290 wind sensor Windancer basic W KNX sec white