Elsner 71235 Windancer KNX weather station with cup anemometer
|
455,87 EUR |
|||||||||||
|
( 542,49 EUR incl. VAT ) ≈ £379.74 | ≈ $500.09 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >10 pieces | |||||||||||
| Lieske Part No.: | 1300854 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 71235 | ||||||||||
| UPC/EAN: | 4051996712350 | ||||||||||
| Weight: | 0.545 kg | ||||||||||
| Type: | 71235 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 71235:
Applications
The weather station is intended for outdoor use on buildings, where it continuously acquires environmental data. It is particularly suitable for building automation systems that rely on weather-dependent control logic, for example, for automatic adjustment of ventilation systems, control of sun protection systems, or adaptation of lighting to daylight conditions. The integrated precipitation detection enables control of roof or terrace coverings, while wind measurement can contribute to shutting down outdoor installations in case of strong wind. The brightness measurement with three separate sensors (East, South, West) allows for differentiated evaluation of light intensity depending on the sun's position.
Functions and Equipment in Detail
Wind measurement is performed using a cup anemometer, which can measure wind speeds up to 200 km/h under laboratory conditions. Precipitation detection is based on a heated sensor surface that recognizes only drops and flakes as precipitation, not fog or dew. As soon as precipitation stops, the sensor dries quickly and the alert ends. Temperature measurement is performed in the range of 25 °C to +50 °C. For all measured values, switching outputs are available, whose threshold values can be set via parameters or communication objects. The device features 6 AND and 6 OR logic gates, each with 4 inputs. As inputs, switching events as well as 16 logic inputs in the form of communication objects can be used. The output of each gate can be configured as either 1 bit or 2 x 8 bits.
Technology Explained Simply
The weather station communicates via the KNX bus system in the medium TP1-256 and operates in S-Mode (Standard Mode) for configuration. The maximum number of group addresses and assignments is 254 each. Communication objects vary depending on the model: 254 for the version with GPS, 201 for the version without GPS. Power consumption is up to 20 mA. The auxiliary voltage is in the range of 24 to 30 V DC SELV, with the auxiliary current at 24 V DC being up to 65 mA. The KNX plug terminal is designed for conductors with a diameter of Ø 0.8 mm s, with a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds for data reception to resume. Power supply is via an external voltage source within the specified range.
Compatibility and Accessories
The weather station is designed for use in a KNX network and can communicate with other KNX devices. The integrated logic allows linking sensor data with switching operations. The device is equipped with a KNX plug terminal connection intended for connection to the bus. The delivery includes the weather station, two stainless steel countersunk head screws (WN56, 4x50 mm, cross recess), two S 6 anchors, two DIN 125 washers (V2A, A4,3, outer diameter 9 mm), one KNX terminal and plug terminal (white/yellow), and a data sheet with installation instructions in German, English, French, Italian, and Spanish. A manual and product file are available for download.
Mounting and Installation
Mounting is done surface-mounted, using the included screws, anchors, and washers. Installation requires secure fastening to an exterior wall or suitable support. Electrical connection is made via the KNX plug terminal, designed for conductors with Ø 0.8 mm s and a stripping length of 5 mm. The auxiliary voltage must be in the range of 24 to 30 V DC SELV. Installation should be carried out according to the installation instructions included in the delivery to ensure correct function and compliance with the protection class IP44.
Advantages in Operation
The weather station enables precise and reliable acquisition of environmental data, which can be directly integrated into building automation. The logic functions allow complex control sequences based on multiple sensor data. Precipitation detection with a heated sensor surface prevents false alarms caused by fog or dew. Brightness measurement with three sensors enables spatially differentiated evaluation. Power supply via the KNX network (PoE) reduces the number of required cables. The integrated logic and configurable switching outputs offer flexibility in adapting to specific requirements in building operation.
| General | |
| Housing | Plastic |
| Colour | white/translucent |
| Mounting | Surface mounted (plaster) |
| Degree of protection | IP44 |
| Dimensions (W × H × D) | 113mm × 101mm × 225mm |
| Weight total | ≈ 260g |
| Ambient temperature | 25...+50°C |
| Storage temperature | 30...+70°C |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 254 (with GPS) / 201 (without GPS) |
| Electricity consumption | ≤ 20mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0.8mm s |
| Connection KNX plug-in terminal stripping length | 5mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Power supply | |
| Auxiliary voltage | 24...30 V DC SELV |
| Auxiliary current [at] | ≤ 65mA [24 V DC] |
| Sensors | |
| Temperature measurement range | 25...+50°C |
| Wind measurement range [at] | 2…30m/s [25 °C] |
| Brightness measurement range | 0 Lux … 150 000 Lux |
Questions & answers
What is the delivery time of Elsner 71235 Windancer KNX weather station with cup anemometer?
The article Elsner 71235 Windancer KNX weather station with cup anemometer is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 71235 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 71235 Windancer KNX weather station with cup anemometer always at the best possible price. We can give you a discount of 2% on Elsner 71235 Windancer KNX weather station with cup anemometer if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Elsner 71235 Windancer KNX weather station with cup anemometer we can offer you a price of 425,10 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

