Elsner 71235, EAN: 4051996712350

Elsner 71235 weather station with cup anemometer

Elsner 71235 weather station with cup anemometer

Lieske Part No. 1300854
Mfg Part No 71235
EAN-Code 4051996712350
Manufacturer Elsner
Here only 455,87 EUR
542,49 EUR incl. VAT

Further information for Elsner 71235 weather station with cup anemometer

General
HousingPlastic
Colourwhite/translucent
MountingSurface mounted (plaster)
Degree of protectionIP44
Dimensions (W × H × D)113mm × 101mm × 225mm
Weight total≈ 260g
Ambient temperature25...+50°C
Storage temperature30...+70°C
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects254 (with GPS) / 201 (without GPS)
Electricity consumption≤ 20mA
Connection KNX plug-in terminal conductor diameterØ 0.8mm s
Connection KNX plug-in terminal stripping length5mm
Time until data reception after bus voltage recovery≈ 5 s
Power supply
Auxiliary voltage24...30 V DC SELV
Auxiliary current [at]≤ 65mA [24 V DC]
Sensors
Temperature measurement range25...+50°C
Wind measurement range [at]2…30m/s [25 °C]
Brightness measurement range0 Lux … 150 000 Lux
The Elsner Windancer KNX 71235 is a weather station for the KNX building bus system, designed specifically for surface mounting. The device measures temperature, wind speed, brightness, and detects precipitation. It is used for decentralized acquisition of environmental data outdoors and enables the control of building functions such as ventilation, heating, sun protection, or lighting based on the measured values. The housing is made of plastic in white/translucent color and features a protection rating IP44, providing protection against splashing water and dust. Dimensions are 113 mm (width) × 101 mm (height) × 225 mm (depth), with a total weight of approximately 260 g. The operating ambient temperature ranges from 25 °C to +50 °C, and the storage temperature ranges from 30 °C to +70 °C.

Applications
The weather station is intended for outdoor use on buildings, where it continuously acquires environmental data. It is particularly suitable for building automation systems that rely on weather-dependent control logic, for example, for automatic adjustment of ventilation systems, control of sun protection systems, or adaptation of lighting to daylight conditions. The integrated precipitation detection enables control of roof or terrace coverings, while wind measurement can contribute to shutting down outdoor installations in case of strong wind. The brightness measurement with three separate sensors (East, South, West) allows for differentiated evaluation of light intensity depending on the sun's position.

Functions and Equipment in Detail
Wind measurement is performed using a cup anemometer, which can measure wind speeds up to 200 km/h under laboratory conditions. Precipitation detection is based on a heated sensor surface that recognizes only drops and flakes as precipitation, not fog or dew. As soon as precipitation stops, the sensor dries quickly and the alert ends. Temperature measurement is performed in the range of 25 °C to +50 °C. For all measured values, switching outputs are available, whose threshold values can be set via parameters or communication objects. The device features 6 AND and 6 OR logic gates, each with 4 inputs. As inputs, switching events as well as 16 logic inputs in the form of communication objects can be used. The output of each gate can be configured as either 1 bit or 2 x 8 bits.

Technology Explained Simply
The weather station communicates via the KNX bus system in the medium TP1-256 and operates in S-Mode (Standard Mode) for configuration. The maximum number of group addresses and assignments is 254 each. Communication objects vary depending on the model: 254 for the version with GPS, 201 for the version without GPS. Power consumption is up to 20 mA. The auxiliary voltage is in the range of 24 to 30 V DC SELV, with the auxiliary current at 24 V DC being up to 65 mA. The KNX plug terminal is designed for conductors with a diameter of Ø 0.8 mm s, with a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds for data reception to resume. Power supply is via an external voltage source within the specified range.

Compatibility and Accessories
The weather station is designed for use in a KNX network and can communicate with other KNX devices. The integrated logic allows linking sensor data with switching operations. The device is equipped with a KNX plug terminal connection intended for connection to the bus. The delivery includes the weather station, two stainless steel countersunk head screws (WN56, 4x50 mm, cross recess), two S 6 anchors, two DIN 125 washers (V2A, A4,3, outer diameter 9 mm), one KNX terminal and plug terminal (white/yellow), and a data sheet with installation instructions in German, English, French, Italian, and Spanish. A manual and product file are available for download.

Mounting and Installation
Mounting is done surface-mounted, using the included screws, anchors, and washers. Installation requires secure fastening to an exterior wall or suitable support. Electrical connection is made via the KNX plug terminal, designed for conductors with Ø 0.8 mm s and a stripping length of 5 mm. The auxiliary voltage must be in the range of 24 to 30 V DC SELV. Installation should be carried out according to the installation instructions included in the delivery to ensure correct function and compliance with the protection class IP44.

Advantages in Operation
The weather station enables precise and reliable acquisition of environmental data, which can be directly integrated into building automation. The logic functions allow complex control sequences based on multiple sensor data. Precipitation detection with a heated sensor surface prevents false alarms caused by fog or dew. Brightness measurement with three sensors enables spatially differentiated evaluation. Power supply via the KNX network (PoE) reduces the number of required cables. The integrated logic and configurable switching outputs offer flexibility in adapting to specific requirements in building operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1300854
qrcode für Elsner 71235 weather station with cup anemometer