Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller
|
336,88 EUR |
|||||||||||
|
( 400,89 EUR incl. VAT ) ≈ £280.62 | ≈ $369.56 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 1147859 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 70970 | ||||||||||
| UPC/EAN: | 4051996709701 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 70970:
Applications
The KNX VOC/TH-UP Touch is suitable for use in apartments, offices, schools, and other indoor spaces where high air quality and thermal comfort are required. It serves as a central sensor for monitoring room air and enables automated control of ventilation and climate systems. The integrated calculation of the dew point supports the prevention of condensation formation. The function for detecting departure from the comfort zone according to DIN 1946 enables proactive response to inadequate room conditions. The device is designed for an ambient temperature of 0 to +45°C and a relative humidity of 10 to 95 % (non-condensing).
Functions and Equipment in Detail
The device measures mixed gas (volatile organic compounds) in the range of 400 to 2000 ppm and calculates an air quality value in CO2 equivalents from this. Temperature is measured in the range of 5 to +60°C and humidity from 0 to 100 % relative. From these values, the dew point is calculated. The measured values can be combined with external values to form mixed values (e.g. room average), with the percentage share being adjustable. The display shows up to three lines with measured or bus-received data. Two touch buttons are used for manually adjusting the set temperature, switching between operating modes, or as freely programmable bus buttons.
Technology Explained Simply
The KNX VOC/TH-UP Touch operates via the TP1-256 bus medium and supports the S-Mode for configuration. Communication takes place via 224 communication objects, with up to 254 group addresses and assignments being usable. The nominal voltage is 30 V DC SELV, and the current consumption is up to 20 mA. The connection terminal for the KNX bus is designed for conductor diameters of 0.6 to 0.8 mm s, with a stripping length of 5 mm. After the bus voltage returns, it takes approximately 6 seconds for data to be received. The integrated PI controllers regulate heating/cooling based on temperature and ventilation based on humidity and mixed gas concentration. Control is performed according to separate setpoints or base set temperature. Additionally, 3 temperature, 2 humidity, and 4 mixed gas limit values are adjustable. Logic processing is performed via 4 AND and 4 OR gates, each with 4 inputs, which can consist of switching events or communication objects. Two control value comparators allow output of minimum, maximum, or average values from up to 5 received values.
Compatibility and Accessories
The device is designed for use in the KNX system and requires configuration via the ETS 5 software. It is equipped with a mounting ring, which is installed in a wind-tight device box according to DIN EN IEC 60670-1 / DIN 49073. A suitable frame for the 55 x 55 mm installation is required to integrate the device visually into the existing switch series. Configuration is performed via the KNX bus, with communication objects and group addresses defined in the ETS system.
Installation and Mounting
Mounting is performed in a standard 55 mm installation switch box, with the mounting ring securing the device. The electrical connection is made via the KNX plug terminal, designed for conductor diameters of 0.6 to 0.8 mm s. The installation depth is 7 mm, allowing the device to be flush-mounted in the wall plate. Installation is carried out according to the instructions in the installation manual, which is included in the delivery. Configuration in the ETS system is performed after physical installation.
Operational Advantages
The KNX VOC/TH-UP Touch enables precise and automated control of room climate conditions. The combination of mixed gas, temperature, and humidity sensors in a single device reduces the number of required sensors and simplifies installation. The integrated logic functions and control value comparators allow complex control logics without additional devices. The display provides direct feedback to the user, while the touch buttons enable intuitive operation. Integration into the KNX system allows central control and monitoring via building automation software. The protection rating IP20 is suitable for indoor use, provided that ambient temperature and humidity remain within the specified limits.
| General | |
| Housing | Real glass, plastic |
| Colours (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 55 mm × 55 mm × 35 mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | 7 mm |
| Weight total | ≈ 70 g |
| Ambient temperature | 0…+45°C |
| Ambient air humidity (rH) (non-condensing) | 10...95 % |
| Storage temperature | 10...+60°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 224 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 20 mA |
| Connection KNX plug-in terminal conductor diameter | 0.6…0.8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 6 s |
| Sensors | |
| Mixed gas measurement range | 400...2000 ppm |
| Temperature measurement range | 5…+60°C |
| Humidity measurement range | 0...100 % |
Questions & answers
What is the delivery time of Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller?
The article Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70970 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller always at the best possible price. We can give you a discount of 2% on Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Elsner 70970 ELSN KNX VOC/TH-UP Touch, pure white RAL 9010 room controller we can offer you a price of 331,83 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

