Elsner 70970, EAN: 4051996709701

Elsner 70970 room controller KNX VOC/TH-UP pure white

Elsner 70970 room controller KNX VOC/TH-UP pure white

Lieske Part No. 1147859
Mfg Part No 70970
EAN-Code 4051996709701
Manufacturer Elsner
Here only 336,88 EUR
400,89 EUR incl. VAT

Further information for Elsner 70970 room controller KNX VOC/TH-UP pure white

General
HousingReal glass, plastic
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H × D)55 mm × 55 mm × 35 mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth7 mm
Weight total≈ 70 g
Ambient temperature0…+45°C
Ambient air humidity (rH) (non-condensing)10...95 %
Storage temperature10...+60°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects224
Nominal voltage30V DC SELV
Electricity consumption≤ 20 mA
Connection KNX plug-in terminal conductor diameter0.6…0.8 mm s
Connection KNX plug-in terminal stripping length5 mm
Time until data reception after bus voltage recovery≈ 6 s
Sensors
Mixed gas measurement range400...2000 ppm
Temperature measurement range5…+60°C
Humidity measurement range0...100 %
The Elsner KNX VOC/TH-UP Touch, type 70970, is a room controller for intelligent building automation. It combines the measurement of volatile organic compounds (mixed gas), temperature, and humidity in a compact device with integrated display and touch buttons. The device is designed for flush installation in residential and office buildings, where continuous monitoring of indoor air quality and automated control of heating, cooling, and ventilation are required. The display shows measured values as well as data received via the KNX bus, such as date and time. The surface consists of real glass and plastic, with the colour offered in pure white (RAL 9010). The housing is equipped with a mounting ring, enabling installation in standard 55 mm installation switch boxes.

Applications

The KNX VOC/TH-UP Touch is suitable for use in apartments, offices, schools, and other indoor spaces where high air quality and thermal comfort are required. It serves as a central sensor for monitoring room air and enables automated control of ventilation and climate systems. The integrated calculation of the dew point supports the prevention of condensation formation. The function for detecting departure from the comfort zone according to DIN 1946 enables proactive response to inadequate room conditions. The device is designed for an ambient temperature of 0 to +45°C and a relative humidity of 10 to 95 % (non-condensing).

Functions and Equipment in Detail

The device measures mixed gas (volatile organic compounds) in the range of 400 to 2000 ppm and calculates an air quality value in CO2 equivalents from this. Temperature is measured in the range of 5 to +60°C and humidity from 0 to 100 % relative. From these values, the dew point is calculated. The measured values can be combined with external values to form mixed values (e.g. room average), with the percentage share being adjustable. The display shows up to three lines with measured or bus-received data. Two touch buttons are used for manually adjusting the set temperature, switching between operating modes, or as freely programmable bus buttons.

Technology Explained Simply

The KNX VOC/TH-UP Touch operates via the TP1-256 bus medium and supports the S-Mode for configuration. Communication takes place via 224 communication objects, with up to 254 group addresses and assignments being usable. The nominal voltage is 30 V DC SELV, and the current consumption is up to 20 mA. The connection terminal for the KNX bus is designed for conductor diameters of 0.6 to 0.8 mm s, with a stripping length of 5 mm. After the bus voltage returns, it takes approximately 6 seconds for data to be received. The integrated PI controllers regulate heating/cooling based on temperature and ventilation based on humidity and mixed gas concentration. Control is performed according to separate setpoints or base set temperature. Additionally, 3 temperature, 2 humidity, and 4 mixed gas limit values are adjustable. Logic processing is performed via 4 AND and 4 OR gates, each with 4 inputs, which can consist of switching events or communication objects. Two control value comparators allow output of minimum, maximum, or average values from up to 5 received values.

Compatibility and Accessories

The device is designed for use in the KNX system and requires configuration via the ETS 5 software. It is equipped with a mounting ring, which is installed in a wind-tight device box according to DIN EN IEC 60670-1 / DIN 49073. A suitable frame for the 55 x 55 mm installation is required to integrate the device visually into the existing switch series. Configuration is performed via the KNX bus, with communication objects and group addresses defined in the ETS system.

Installation and Mounting

Mounting is performed in a standard 55 mm installation switch box, with the mounting ring securing the device. The electrical connection is made via the KNX plug terminal, designed for conductor diameters of 0.6 to 0.8 mm s. The installation depth is 7 mm, allowing the device to be flush-mounted in the wall plate. Installation is carried out according to the instructions in the installation manual, which is included in the delivery. Configuration in the ETS system is performed after physical installation.

Operational Advantages

The KNX VOC/TH-UP Touch enables precise and automated control of room climate conditions. The combination of mixed gas, temperature, and humidity sensors in a single device reduces the number of required sensors and simplifies installation. The integrated logic functions and control value comparators allow complex control logics without additional devices. The display provides direct feedback to the user, while the touch buttons enable intuitive operation. Integration into the KNX system allows central control and monitoring via building automation software. The protection rating IP20 is suitable for indoor use, provided that ambient temperature and humidity remain within the specified limits.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147859
qrcode für Elsner 70970 room controller KNX VOC/TH-UP pure white