Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black

Your rating:
Average rating
product review for Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black
( 4.5 / 5 ) 2 ratings
Elsner 70682
This image may differ from the desired article.
223,53 EUR 232,94 EUR
( 266,00 EUR incl. VAT )
≈ £186.20  |  ≈ $245.21
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black
Lieske Part No.:701099
Mfg Part No: 70682
UPC/EAN: 4051996706823
Weight:0.123 kg
Type:70682
Graduated prices net
From piecesPrice per pieces
5220,18 EUR
10216,82 EUR
15213,47 EUR
20210,12 EUR

Product information for Elsner 70682:

The Elsner Intra-Sewi KNX TH-L-Pr is an in-wall presence, light, and room climate sensor for the KNX building bus system. It is used to detect presence, light intensity, room temperature, and relative humidity, enabling intelligent control of lighting, heating, cooling, and ventilation in indoor spaces. The device is designed for installation in hollow ceilings or in recessed mounting and features integrated logic functions for linking sensor data and control commands.

Applications

The sensor is suitable for use in residential and office buildings where automated, energy-saving room climate control is required. It detects the presence of people in the room using a passive infrared (PIR) method with a range of approximately 5 meters and a detection angle of approximately 94° × 82°. Light intensity is measured in the range of 0 to 2000 Lux, allowing rooms with varying lighting conditions to be monitored. Temperature measurement is performed in the range of 5 to +60 °C, and relative humidity is measured in the range of 0 to 100 %. These values are used to calculate the dew point and to check whether the comfort zone according to DIN 1946 is exceeded.

Functions and Equipment in Detail

The sensor features integrated PI controllers that can control heating or cooling based on temperature and ventilation based on humidity. Control can be performed either according to separate setpoints or a base setpoint. Additionally, two control value comparators are integrated, which can calculate minimum, maximum, or average values from five received values. The logic functions include four AND and four OR gates, each with four inputs, which can process both switching events and communication objects. The outputs of the gates can be configured as either 1 bit or 2 x 8 bits. Configuration is performed via the KNX software ETS.

Technology Explained Simply

The sensor operates in the TP1-256 bus medium and is configurable in S-Mode. The nominal voltage is 30 V DC SELV, and the current consumption is up to 10 mA. Communication objects include 252 inputs and 122 outputs, with support for up to 254 group addresses and assignments. The connection terminal for the KNX bus is designed for conductors with a diameter of 0.8 mm, and the stripping length is 5 mm. After restoring bus voltage, it takes approximately 5 seconds before data can be received. The housing is made of plastic and glass, available in RAL 9010 (white) and RAL 9005 (black), with dimensions of 80 mm Ø × 36 mm height. The protection rating is IP30, providing protection against solid objects larger than 2.5 mm and against splashing water from any direction. The ambient temperature ranges from 5 to +45 °C, and the humidity (non-condensing) ranges from 5 to 95 %. The storage temperature is 25 to +70 °C. The overvoltage category is III, and the pollution degree is 2.

Compatibility and Accessories

The sensor is designed for the KNX system and can communicate with other KNX devices. The integrated functions allow processing of external temperature and humidity values received via the bus and combining them with internal measurements to create mixed values, for example, for room average.

Installation and Mounting

The sensor is installed in hollow ceilings or in a recessed mounting opening. The delivery includes pre-mounted terminals for hollow ceiling installation, a mounting ring for recessed installation, and a KNX plug terminal. Installation is carried out according to the installation instructions included in the delivery, available in German, English, French, Italian, and Spanish. Additionally, a manual is available for download.

Operational Advantages

By combining presence, light, and room climate sensors in a single device, the number of required individual components is reduced. The integrated logic functions enable flexible control of room climate and lighting, resulting in energy savings and a more comfortable indoor climate. The calculation of the dew point and monitoring of the comfort zone according to DIN 1946 support healthy and pleasant indoor air quality. Communication objects and configuration via ETS allow individual adaptation to the specific requirements of the building.

Scope of Delivery

  • Sensor
  • Pre-mounted terminals for hollow ceiling installation
  • Mounting ring for recessed installation
  • KNX plug terminal
  • Datasheet with installation instructions (German, English, French, Italian, Spanish)
  • Manual (German, English, French, Italian, Spanish) as download
  • Product file (German, English, French, Italian, Spanish) as download


General
Housing plastic, glassplastic, glass
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Dimensions (Ø × H)80mm × 36mm
Degree of protectionIP30
Weight total≈ 50 g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)5...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects252 / 122
Nominal voltage30V DC SELV
Electricity consumption≤ 10mA
Connection KNX plug-in terminal conductor diameter0.8mm s
Connection KNX plug-in terminal stripping length5mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
Detection method presence passive infrared techniquePIR
Presence detection angle≈ 94° × 82°
Presence detection range≈ 5 m
Brightness measurement range0 Lux … 2000 Lux
Temperature measurement range5…+60 °C
Humidity measurement range (rH)0...100 %


Questions & answers

What is the delivery time of Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black?

The article Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70682 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black always at the best possible price. We can give you a discount of 2% on Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black we can offer you a price of 220,18 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Elsner 70682 KNX TH-L presence light room climate sensor black
Elsner 70682 Intra-Sewi KNX TH-L presence, brightness & room climate sensor, black
223,53 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Elsner 70682 KNX TH-L presence light room climate sensor black
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
4 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.