Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor

Your rating:
Average rating
product review for Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor
( 4.3 / 5 ) 4 ratings
Elsner 70681
This image may differ from the desired article.
223,53 EUR 232,94 EUR
( 266,00 EUR incl. VAT )
≈ £186.20  |  ≈ $245.21
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor
Datasheet:file_download Download
Lieske Part No.:833089
Mfg Part No: 70681
UPC/EAN: 4051996706816
Weight:0.123 kg
Type:70681
Graduated prices net
From piecesPrice per pieces
5220,18 EUR
10216,82 EUR
15213,47 EUR
20210,12 EUR

Product information for Elsner 70681:

The Elsner Intra-Sewi KNX TH-L-Pr (type 70681) is an in-wall presence, light level, and room climate sensor for the KNX building bus system. It is designed for decentralized detection of environmental parameters such as presence, light intensity, temperature, and humidity, enabling intelligent control of lighting, heating, cooling, and ventilation in indoor spaces. The device is available in pure white finish (RAL 9010), with a black variant (RAL 9005) also offered. The housing is made of plastic and glass and is designed for installation in hollow ceilings or recessed mounting. Dimensions are 80 mm diameter and 36 mm height, with a total weight of approximately 50 g. The IP30 protection rating safeguards against contact with foreign objects larger than 2.5 mm and against splashing water, making the sensor suitable for indoor use. The operating ambient temperature ranges from 5 °C to +45 °C, with humidity (non-condensing) between 5 % and 95 %. Storage temperature is 25 °C to +70 °C.

Applications

The sensor is intended for integration into intelligent building automation systems, particularly in residential and office buildings where automated control of lighting, climate, and ventilation is required. It is suitable for rooms with low to medium ceiling height, as the presence detection has a range of approximately 5 m and a detection angle of about 94° × 82°. Light level measurement is performed in the range of 0 Lux to 2000 Lux, sufficient for typical indoor conditions. Temperature measurement covers 5 °C to +60 °C, while relative humidity is detected from 0 % to 100 %. These data are used to calculate the dew point and monitor the comfort zone according to DIN 1946.

Functions and Equipment in Detail

The sensor detects human presence using passive infrared (PIR) technology. Light level measurement enables automatic adjustment of lighting to ambient light conditions. Temperature and humidity sensors provide data for room climate control. The sensor can receive external temperature and humidity values via the KNX bus and combine them with internal measurements to calculate mixed values (e.g., room average). The proportions of internal and external values are adjustable in percentage terms. Integrated PI controllers regulate heating and cooling based on temperature and ventilation based on humidity. Ventilation control can be single- or two-stage, distinguishing between exhaust and supply ventilation. Additionally, two value comparators are integrated, which can calculate minimum, maximum, or average values from up to five received values.

Technology Explained Simply

The sensor communicates via the KNX bus medium TP1-256 in S-Mode. The nominal voltage is 30 V DC SELV, with current consumption limited to ≤ 10 mA. Configuration is performed using the KNX software ETS. The maximum number of group addresses and assignments is 254 each. Communication objects are equipped with 252 inputs and 122 outputs. The integrated KNX terminal allows connection of conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. After bus voltage is restored, it takes approximately 5 seconds before data can be received. Overvoltage category III and pollution degree 2 meet requirements for indoor installations.

Compatibility and Accessories

The sensor is designed for use in KNX systems and can communicate with other KNX devices. Integrated logic gates (4 AND and 4 OR gates) allow linking of states, with inputs derived from switching events or communication objects. The outputs of the gates can be configured as either 1 bit or 2 x 8 bits. Configuration is done via ETS software. The device includes pre-mounted clips for hollow ceiling installation and a mounting ring for recessed installation. A data sheet with installation instructions (in German, English, French, Italian, Spanish) and a manual (available as download) are included in the delivery scope.

Installation and Mounting

Mounting is performed either in hollow ceilings using the pre-mounted clips or in a recessed mounting box using the included mounting ring. Installation requires connection to the KNX bus via the integrated terminal. The connecting conductors must have a diameter of 0.8 mm s and a stripping length of 5 mm. The device address is assigned via ETS software. Configuration of sensor settings, such as thresholds, control parameters, and logic functions, is also done via ETS software. Installation should be carried out according to the instructions in the data sheet.

Operational Advantages

The sensor enables automated and energy-efficient control of lighting and room climate. Integrated functions such as mixed value calculation, PI control, and logic linking reduce the need for additional control devices. The warning when leaving the comfort zone according to DIN 1946 supports room climate control. The use of communication objects for data transmission and processing allows flexible adaptation to different requirements. Configuration via ETS ensures standardized and documentable device settings.

General
Housing plastic, glassplastic, glass
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Dimensions (Ø × H)80mm × 36mm
Degree of protectionIP30
Weight total≈ 50 g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)5...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects252 / 122
Nominal voltage30V DC SELV
Electricity consumption≤ 10mA
Connection KNX plug-in terminal conductor diameter0.8mm s
Connection KNX plug-in terminal stripping length5mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
Detection method presence passive infrared techniquePIR
Presence detection angle≈ 94° × 82°
Presence detection range≈ 5 m
Brightness measurement range0 Lux … 2000 Lux
Temperature measurement range5…+60 °C
Humidity measurement range (rH)0...100 %


Product data sheet
Datasheet for Elsner 70681, EAN: 4051996706816

Questions & answers

What is the delivery time of Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor ?

The article Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70681 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor always at the best possible price. We can give you a discount of 2% on Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor we can offer you a price of 220,18 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Elsner 70681 built-in presence/light/climate sensor pure white
Elsner 70681 Intra-Sewi KNX TH-L-Pr pure white built-in presence/light level/climate sensor
223,53 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Elsner 70681 built-in presence/light/climate sensor pure white
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 7 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.