Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor

Your rating:
Average rating
product review for Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor
( 4 / 5 ) 1 ratings
Elsner 70672
This image may differ from the desired article.
186,01 EUR 193,84 EUR
( 221,35 EUR incl. VAT )
≈ £154.95  |  ≈ $204.05
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor
Lieske Part No.:701097
Mfg Part No: 70672
UPC/EAN: 4051996706724
Weight:0.123 kg
Type:70672
Graduated prices net
From piecesPrice per pieces
5183,22 EUR
10180,43 EUR
15177,64 EUR
20174,85 EUR

Product information for Elsner 70672:

The Elsner Intra-Sewi KNX L-Pr is an in-wall presence detector with integrated light sensor, specifically designed for use in the KNX bus system. The device detects the presence of persons using passive infrared technology (PIR) and simultaneously monitors ambient lighting, enabling intelligent lighting control in indoor spaces. The combination of presence detection and light measurement makes the sensor particularly suitable for office and administrative rooms, where automatic, energy-saving lighting control is required. The housing is made of plastic and glass, available in RAL 9010 (white) and RAL 9005 (black), and features a compact design with a diameter of 80 mm and a height of 36 mm. The IP30 protection rating safeguards against access to moving parts and against solid foreign objects larger than 2.5 mm, making it suitable for use in enclosed indoor environments.

Applications

The sensor is intended for installation in hollow ceilings or into recessed mounting boxes. It is particularly suitable for rooms with constant usage, such as offices, conference rooms, or corridors, where automatic lighting control based on occupancy and sufficient daylight is beneficial. The detection angles of approximately 94° × 82° and a range of approximately 5 m enable comprehensive coverage of the room. The light measurement range of 0 to 2000 Lux allows precise adjustment of lighting according to daylight conditions. Additionally, the sensor detects ambient temperature in the range of 5 to +60 °C and relative humidity from 0 to 100 %, which is useful for comprehensive room monitoring systems.

Functions and Equipment in Detail

The Intra-Sewi KNX L-Pr features integrated logic gates that enable flexible control. There are 4 AND and 4 OR gates, each with 4 inputs available. Inputs can be used for both switching events and 16 logic inputs in the form of communication objects. The gate outputs can be configured as either 1 bit or 2 x 8 bits, enabling versatile control of loads within the KNX system. The threshold values for presence and light measurement can be set via parameters or communication objects, allowing individual adaptation to specific room conditions. Configuration is performed using the KNX software ETS, which is standard for programming KNX devices.

Technology Explained Simply

The sensor operates in S-Mode, a configuration mode of the KNX system that enables simple and secure parameterization. Communication takes place via the TP1-256 medium, used for data transmission in the KNX bus. The nominal voltage is 30 V DC SELV, ensuring a safe, low-voltage supply. The current consumption is ≤ 10 mA, which is very low and underscores the energy efficiency of the device. The plug terminals for the KNX connection are designed for conductors with a diameter of 0.8 mm, requiring a stripping length of 5 mm. After a bus voltage recovery, it takes approximately 5 seconds for data reception to resume, enabling quick communication restoration.

Compatibility and Accessories

The sensor is developed for the KNX bus system and can be integrated with other KNX devices within a building automation system. The maximum number of group addresses and assignments is 254 each, allowing flexible integration into larger systems. The communication objects are equipped with 252/122, enabling extensive data processing and transmission. For recessed installation, a mounting ring is included in the delivery scope, as well as pre-mounted terminals for hollow ceiling installation. The installation manual is available in multiple languages (German, English, French, Italian, Spanish), as is the handbook and product file for download.

Installation and Mounting

Installation is carried out either in hollow ceilings or into a recessed mounting box. In hollow ceilings, the sensor is installed directly into the ceiling, with pre-mounted terminals facilitating the connection. For recessed installation, the mounting ring is used and inserted into the box. Installation requires connecting to the KNX bus via the plug terminals. Configuration is performed using the ETS software, where parameters such as light thresholds, logic functions, and group addresses are set. The ambient temperature should be between 5 and +45 °C, and the humidity (non-condensing) between 5 and 95 %. The storage temperature is 25 to +70 °C.

Operational Advantages

The Intra-Sewi KNX L-Pr enables automated, energy-saving lighting control that adapts to actual room usage. The combination of presence detection and light measurement reduces unnecessary energy consumption, as lighting is switched off only when no one is present and sufficient daylight is available. The integrated logic gates allow for complex control logic beyond standard functions. The low current consumption and safe low-voltage supply enhance operational safety. The flexible configuration via ETS allows adaptation to different requirements and system environments. The measurement of temperature and humidity extends the sensor’s functionality beyond basic lighting control, making it suitable for comprehensive building automation systems.

General
Housing plastic, glassplastic, glass
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Dimensions (Ø × H)80mm × 36mm
Degree of protectionIP30
Weight total≈ 50 g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)5...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects252 / 122
Nominal voltage30V DC SELV
Electricity consumption≤ 10mA
Connection KNX plug-in terminal conductor diameter0.8mm s
Connection KNX plug-in terminal stripping length5mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
Detection method presence passive infrared techniquePIR
Presence detection angle≈ 94° × 82°
Presence detection range≈ 5 m
Brightness measurement range0 Lux … 2000 Lux
Temperature measurement range5…+60 °C
Humidity measurement range (rH)0...100 %


Questions & answers

What is the delivery time of Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor ?

The article Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70672 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor always at the best possible price. We can give you a discount of 2% on Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor we can offer you a price of 183,22 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Elsner 70672 built-in presence detector black
Elsner 70672 Intra-Sewi KNX L-Pr black built-in presence detector with light sensor
186,01 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Elsner 70672 built-in presence detector black
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
1 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.