Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor
|
186,01 EUR 193,84 EUR |
|||||||||||
|
( 221,35 EUR incl. VAT ) ≈ £154.95 | ≈ $204.05 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 835124 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 70671 | ||||||||||
| UPC/EAN: | 4051996706717 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 70671 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 70671:
Applications
This presence sensor is intended for indoor use where automatic lighting control based on motion detection and light measurement is desired. It is suitable for office buildings, conference rooms, corridors, and other areas with regular foot traffic. The ambient temperature must be between 5 °C and +45 °C, and the relative humidity (non-condensing) must be between 5 % and 95 %. Storage conditions range from 25 °C to +70 °C. The IP30 protection rating protects against contact with foreign objects and splashing water, but not against direct water jets or dust, so outdoor use is not intended.
Functions and Equipment in Detail
The sensor detects people even with minimal movements, such as sitting or slight body movements, and responds with a range of approximately 5 meters and a detection angle of about 94° × 82°. Light measurement is performed in the range of 0 Lux to 2000 Lux, enabling reliable operation even in rooms with varying daylight conditions. Additionally, the sensor measures ambient temperature in the range of 5 °C to +60 °C and relative humidity from 0 % to 100 %. The threshold values for light, temperature, and humidity can be adjusted via parameters or communication objects. Configuration is performed using the KNX software ETS.
Technology Explained Simply
The device operates in S-Mode configuration mode and uses the TP1-256 bus medium. The nominal voltage is 30 V DC SELV, and the current consumption is up to 10 mA. Communication is via a KNX screw terminal connector, designed for conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds before data can be received. The maximum number of group addresses and assignments is 254 each, with 252 communication objects available for inputs and 122 for outputs. The overvoltage category III and pollution degree 2 indicate a robust design suitable for use in normal indoor environments.
Compatibility and Accessories
The Intra-Sewi KNX L-Pr is developed for the KNX bus system and can be integrated with other KNX devices, such as lighting control actuators, dimmers, or heating controllers, into an intelligent building automation system. The logic functions include 4 AND and 4 OR gates, each with 4 inputs. Inputs can be used as switching events or as 16 logic inputs in the form of communication objects. The outputs of the gates can be configured as either 1 bit or 2 x 8 bits. The device is designed for installation in hollow ceilings and is supplied with pre-mounted terminals. For recessed installation, a mounting ring is included, and a device box with a diameter of 60 mm and a depth of 42 mm is required separately.
Installation and Mounting
Installation is carried out by mounting into a hollow ceiling or a suitable recessed installation solution. The pre-mounted terminals simplify wiring, with connection terminals designed for conductors of 0.8 mm s and a stripping length of 5 mm. The installation instructions are available in multiple languages (German, English, French, Italian, Spanish) and support correct installation. Configuration is performed via the KNX software ETS, allowing individual adjustment of parameters such as light thresholds, logic functions, and group addresses.
Operational Advantages
The use of the presence and light sensor enables efficient energy savings through automatic switching off of lighting when no people are present or when ambient lighting is sufficient. The integrated logic functions allow complex control sequences that can be adapted to the specific requirements of the room. The high reliability in motion detection, even during low activity, ensures uninterrupted operation. Communication via the KNX system ensures flexible integration into existing building automation systems.
Scope of Delivery
The device is supplied with pre-mounted terminals for hollow ceiling installation, a mounting ring for recessed installation, installation instructions (in German, English, French, Italian, Spanish), and a manual (available as download). The product file is also available as a download.
| General | |
| Housing plastic, glass | plastic, glass |
| Colours (similar) | RAL 9010 (white), RAL 9005 (black) |
| Dimensions (Ø × H) | 80mm × 36mm |
| Degree of protection | IP30 |
| Weight total | ≈ 50 g |
| Ambient temperature | 5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 5...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus | |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 252 / 122 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 10mA |
| Connection KNX plug-in terminal conductor diameter | 0.8mm s |
| Connection KNX plug-in terminal stripping length | 5mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensors | |
| Detection method presence passive infrared technique | PIR |
| Presence detection angle | ≈ 94° × 82° |
| Presence detection range | ≈ 5 m |
| Brightness measurement range | 0 Lux … 2000 Lux |
| Temperature measurement range | 5…+60 °C |
| Humidity measurement range (rH) | 0...100 % |
Questions & answers
What is the delivery time of Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor ?
The article Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70671 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor always at the best possible price. We can give you a discount of 2% on Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 70671 Intra-Sewi KNX L-Pr pure white built-in presence detector with brightness sensor we can offer you a price of 183,22 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

