Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity
|
178,84 EUR |
|||||||||||
|
( 212,82 EUR incl. VAT ) ≈ £148.97 | ≈ $196.19 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 1343855 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 70669 | ||||||||||
| UPC/EAN: | 4051996706694 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 70669:
Applications
The sensor is used in buildings with KNX installations to monitor and control room climate conditions. It is suitable for residential and office buildings where intelligent climate control is implemented via the KNX system. The measured values are used to control heating, cooling, and ventilation systems to ensure a comfortable indoor climate. The dew point calculation function supports the prevention of condensation, especially in rooms with high humidity.
Functions and Equipment in Detail
The Intra-Sewi KNX TH measures temperature in the range of 20 °C to +60 °C and relative humidity from 0 % to 100 % rH. The internal sensors can be combined with external values, with the proportion of internal and external measurements being adjustable in percentage terms. This enables the calculation of mixed values, for example, for room averages. The limit values for temperature and humidity are configurable via parameters or communication objects. The device features an integrated PI controller for heating and cooling, which operates based on temperature values and supports both single- and two-stage control. A second PI controller controls ventilation based on humidity, allowing exhaust and supply ventilation to be implemented as single-stage or exhaust ventilation as single- or two-stage. The bus notification function indicates whether the measured values lie within the comfort zone according to DIN 1946.
Technology Explained Simply
Communication takes place over the KNX network via medium TP1-256. The sensor operates in configuration mode S-Mode and supports up to 254 group addresses and 254 assignments. The nominal voltage is 30 V DC SELV, with a maximum current draw of 10 mA. Data transmission occurs via KNX plug-in terminals. After the bus voltage is restored, it takes approximately 5 seconds for data to be received. Configuration is performed using the KNX software ETS. Communication objects include 183 for the Intra-Sewi KNX TH and 129 for the Intra-Sewi KNX T. Logic functions include 4 AND and 4 OR gates, each with 4 inputs, which can be assigned to switching events or communication objects. The gate outputs can be configured as either 1 bit or 2 x 8 bits. Two setpoint comparators enable the output of minimum, maximum, or average values from up to five received values.
Compatibility and Accessories
The sensor is designed for the KNX system and requires a KNX installation. The pre-mounted terminals facilitate installation in hollow ceilings. For installation in a device box, a mounting ring is included. Configuration is done via the ETS software. The delivery includes the sensor, pre-mounted terminals, mounting ring, installation instructions in multiple languages (German, English, French, Italian, Spanish), as well as a manual and product file available for download.
Mounting and Installation
Mounting is either into a hollow ceiling or into a device box. The pre-mounted terminals facilitate installation in hollow ceilings. The mounting ring is intended for installation into a device box. Installation is carried out according to the instructions in the installation manual. Power supply is via the KNX bus network (PoE, power supply through the network cable). Configuration is performed using the ETS software.
Operational Advantages
The sensor enables precise and flexible control of room climate systems. The integrated logic functions and controllers reduce the need for additional control devices. The mixed value calculation allows the use of multiple sensors for a representative room representation. The bus notification according to DIN 1946 supports compliance with comfort criteria. Configuration via ETS is standardized and enables easy integration into existing KNX systems.
| General | |
| Housing | plastic, glass |
| Colours | similar to pure white RAL 9010, similar to deep black RAL 9005 |
| Mounting | installation in hollow ceiling or device box |
| Dimensions Ø × mounting depth | ca. 80 mm x ca. 5 mm; mounting depth ca. 31 mm (including terminals) |
| Degree of protection | IP 30 |
| Weight | ca. 50 g |
| Ambient temperature | 20…+60°C |
| Ambient air humidity | 5...95% rH, non-condensing |
| Storage temperature | 30…+70°C |
| KNX bus | |
| KNX medium | TP1-256 |
| Configuration mode | S-Mode |
| Group addresses | max. 254 |
| Assignments | max. 254 |
| Communication objects | Intra-Sewi KNX TH: 183, Intra-Sewi KNX T: 129 |
| Nominal voltage KNX | 30 V DC SELV |
| Power consumption KNX | max. 10 mA |
| Connection | KNX plug-in terminals |
| Time until data reception after bus voltage recovery | approx. 5 seconds |
| Sensors | |
| Temperature measurement range | 20°C … +60°C |
| Humidity measurement range | 0% rF … 100% rF |
Questions & answers
What is the delivery time of Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity?
The article Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 70669 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity always at the best possible price. We can give you a discount of 2% on Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 70669 Intra-Sewi KNX TH pure white built-in sensor for temperature/humidity we can offer you a price of 176,16 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

