Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Elsner 30116 Flex L+ arm for weather station

Your rating:
Average rating
product review for Elsner 30116 Flex L+ arm for weather station
( 4 / 5 ) 1 ratings
Elsner 30116
This image may differ from the desired article.
Elsner 30116Elsner 30116
209,96 EUR 218,80 EUR
( 249,85 EUR incl. VAT )
≈ £174.90  |  ≈ $230.33
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x Elsner 30116 Flex L+ arm for weather station
Lieske Part No.:512016
Mfg Part No: 30116
UPC/EAN: 4051996301165
Weight:0.36 kg
Type:30116
Graduated prices net
From piecesPrice per pieces
5206,81 EUR
10203,66 EUR
15200,51 EUR
20197,36 EUR

Product information for Elsner 30116:

The Elsner 30116 bracket is a wall-mounting system for weather stations and sensors, featuring two ball joints that allow flexible orientation. The product is designed as Flex L+ and is intended for the secure attachment of various weather stations to a wall, with each joint enabling a tilt of up to 25°. The construction is designed for outdoor use, with a powder-coated surface in white RAL 9003 satin finish, ensuring high resistance to weather conditions. The total length is approximately 267 mm (excluding the weather station holder), and the weight is around 360 g.

Applications
This bracket is suitable for a wide range of weather stations and sensors, including models from the Windancer, Suntracer KNX (basic, KNX-GPS, KNX sl including light and basic) series, as well as KNX weather sensors. It is also compatible with weather stations for Solexa, Solexa II, Solexa Home, and Arexa control systems. Additionally, sensors of types P03-RS485, RS485 weather sensors, P03-Modbus, P04-RS485, P04i-GPS (for WS1/WS1000 Color/Style and KNX WS1000 Style controllers), and KNX-type sensors can be mounted on this bracket. The flexible mounting allows for optimal sensor alignment in relation to wind, solar radiation, and other meteorological parameters.

Functions and Features in Detail
The bracket features two ball joints, each allowing a tilt of 25°. These joints enable precise adjustment of the weather station to the desired position, ensuring optimal measurement conditions. Installation is done on the wall using a special plate connected to the bracket. The weather station holder is also integrated, allowing the station to be directly mounted on the bracket. The entire construction is made from robust material suitable for outdoor use.

Technology Explained Simply
The two ball joints provide dual mobility: one in the horizontal direction (e.g., for alignment to north or south) and one in the vertical direction (e.g., for tilting up or down). This flexibility is crucial for optimal sensor alignment, such as avoiding direct sunlight or precisely measuring wind direction and speed. The powder-coated surface in white RAL 9003 satin finish offers high corrosion resistance and weatherproofing, extending the bracket’s service life. The total length of approximately 267 mm ensures sufficient distance from the wall to prevent interference with sensor readings.

Compatibility and Accessories
The bracket is specifically designed for the mentioned weather stations and sensors. Installation is carried out using the included hex cap screws DIN 912 in various lengths (M4x8, M4x20, M4x25), depending on the device type, along with matching stainless steel washers DIN125 4,3. The screws are made of stainless steel to prevent corrosion in outdoor environments. The bracket is mounted to the wall using the included mounting plate, and the weather station is attached to the other end of the bracket. Compatibility includes both RS485- and Modbus-based sensors, as well as KNX systems.

Installation and Mounting
Mounting is done on a flat wall surface, with the included mounting plate secured using the appropriate screws. The screw length depends on the device type (e.g., M4x8 for P03/Solexa/Suntracer, M4x25 for P04/Suntracer sl). The weather station is then attached to the holder on the bracket. The installation manual, available in German, English, French, Italian, and Spanish, provides step-by-step instructions for correct installation. The manual is part of the delivery and serves as a guide during installation.

Operational Advantages
The flexible orientation provided by the two ball joints allows optimal positioning of the weather station, improving measurement accuracy. The robust construction and stainless steel screws ensure a long-lasting, maintenance-free installation. The powder-coated surface in white RAL 9003 satin finish is aesthetically pleasing and weather-resistant. Clear compatibility with a wide range of weather stations and sensors reduces the need for multiple mounting systems, simplifying planning and installation.

The delivery includes the bracket with wall mounting plate and weather station holder, three different stainless steel hex cap screws (M4x8, M4x20, M4x25), two of each, and two stainless steel washers DIN125 4,3. Additionally, a datasheet with installation instructions in multiple languages is included.

General
ColourPowder-coated white RAL 9003 satin-matt
Joints2 ball joints 25°
Total lengthca. 267 mm
CompatibilityWeather stations Windancer, Suntracer KNX (basic, KNX-GPS, KNX sl including light and basic), KNX weather sensors, controls Solexa, Solexa II, Solexa Home, Arexa, sensors P03-RS485, RS485 weather sensors, P03-Modbus, P04-RS485, P04i-GPS, sensors Vari KNX
Scope of deliverybracket with plate for wall mounting and plate for weather station, 2× hex head screw DIN 912 M4x8 stainless steel, 2× hex head screw DIN 912 M4x20 stainless steel, 2× hex head screw DIN 912 M4x25 stainless steel, 2× washer DIN125 4,3 stainless steel, datasheet with installation instructions (German, English, French, Italian, Spanish)
Flex L
ColourPowder-coated white RAL 9003 satin-matt
Joints1 ball joint 25°
Total lengthapprox. 215 mm (without weather station holder)
Weightca. 284 g


Questions & answers

What is the delivery time of Elsner 30116 Flex L+ arm for weather station?

The article Elsner 30116 Flex L+ arm for weather station is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 30116 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Elsner 30116 Flex L+ arm for weather station always at the best possible price. We can give you a discount of 2% on Elsner 30116 Flex L+ arm for weather station if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 30116 Flex L+ arm for weather station we can offer you a price of 206,81 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

Elsner 30147 P03/3-Modbus-GPS weather station with GPS receiver UTC Elsner 30147 P03/3-Modbus-GPS weather station with GPS receiver UTC The Elsner weather station type 30147, model P03/3-Modbus-GPS, is a Modbus-compatible station for measuring environmental parameters such as temperature, wind speed, brightness, and precipitation. It ...

Lieske Part No.: 916190
Mfg Part No: 30147
550,84 EUR 574,03 EUR
Elsner 30147 plus VAT
≈ £458.85  |  ≈ $604.27
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
Elsner 30146 P03/3-Modbus weather station without reception of a time signal Elsner 30146 P03/3-Modbus weather station without reception of a time signal The Elsner P03/3-Modbus weather station is a Modbus server for integration into home automation systems and building automation technology. It measures temperature, wind speed, and brightness using ...

Lieske Part No.: 1319683
Mfg Part No: 30146
426,30 EUR 444,25 EUR
Elsner 30146 plus VAT
≈ £355.11  |  ≈ $467.65
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Elsner 30116 arm for weather station
Elsner 30116 Flex L+ arm for weather station
209,96 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Elsner 30116 arm for weather station
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.