| General |
| Colour | Powder-coated white RAL 9003 satin-matt |
| Joints | 2 ball joints 25° |
| Total length | ca. 267 mm |
| Compatibility | Weather stations Windancer, Suntracer KNX (basic, KNX-GPS, KNX sl including light and basic), KNX weather sensors, controls Solexa, Solexa II, Solexa Home, Arexa, sensors P03-RS485, RS485 weather sensors, P03-Modbus, P04-RS485, P04i-GPS, sensors Vari KNX |
| Scope of delivery | bracket with plate for wall mounting and plate for weather station, 2× hex head screw DIN 912 M4x8 stainless steel, 2× hex head screw DIN 912 M4x20 stainless steel, 2× hex head screw DIN 912 M4x25 stainless steel, 2× washer DIN125 4,3 stainless steel, datasheet with installation instructions (German, English, French, Italian, Spanish) |
| Flex L |
| Colour | Powder-coated white RAL 9003 satin-matt |
| Joints | 1 ball joint 25° |
| Total length | approx. 215 mm (without weather station holder) |
| Weight | ca. 284 g |
The Elsner 30116 bracket is a wall-mounting system for weather stations and sensors, featuring two ball joints that allow flexible orientation. The product is designed as Flex L+ and is intended for the secure attachment of various weather stations to a wall, with each joint enabling a tilt of up to 25°. The construction is designed for outdoor use, with a powder-coated surface in white RAL 9003 satin finish, ensuring high resistance to weather conditions. The total length is approximately 267 mm (excluding the weather station holder), and the weight is around 360 g.
Applications
This bracket is suitable for a wide range of weather stations and sensors, including models from the Windancer, Suntracer KNX (basic, KNX-GPS, KNX sl including light and basic) series, as well as KNX weather sensors. It is also compatible with weather stations for Solexa, Solexa II, Solexa Home, and Arexa control systems. Additionally, sensors of types P03-RS485, RS485 weather sensors, P03-Modbus, P04-RS485, P04i-GPS (for WS1/WS1000 Color/Style and KNX WS1000 Style controllers), and KNX-type sensors can be mounted on this bracket. The flexible mounting allows for optimal sensor alignment in relation to wind, solar radiation, and other meteorological parameters.
Functions and Features in Detail
The bracket features two ball joints, each allowing a tilt of 25°. These joints enable precise adjustment of the weather station to the desired position, ensuring optimal measurement conditions. Installation is done on the wall using a special plate connected to the bracket. The weather station holder is also integrated, allowing the station to be directly mounted on the bracket. The entire construction is made from robust material suitable for outdoor use.
Technology Explained Simply
The two ball joints provide dual mobility: one in the horizontal direction (e.g., for alignment to north or south) and one in the vertical direction (e.g., for tilting up or down). This flexibility is crucial for optimal sensor alignment, such as avoiding direct sunlight or precisely measuring wind direction and speed. The powder-coated surface in white RAL 9003 satin finish offers high corrosion resistance and weatherproofing, extending the bracket’s service life. The total length of approximately 267 mm ensures sufficient distance from the wall to prevent interference with sensor readings.
Compatibility and Accessories
The bracket is specifically designed for the mentioned weather stations and sensors. Installation is carried out using the included hex cap screws DIN 912 in various lengths (M4x8, M4x20, M4x25), depending on the device type, along with matching stainless steel washers DIN125 4,3. The screws are made of stainless steel to prevent corrosion in outdoor environments. The bracket is mounted to the wall using the included mounting plate, and the weather station is attached to the other end of the bracket. Compatibility includes both RS485- and Modbus-based sensors, as well as KNX systems.
Installation and Mounting
Mounting is done on a flat wall surface, with the included mounting plate secured using the appropriate screws. The screw length depends on the device type (e.g., M4x8 for P03/Solexa/Suntracer, M4x25 for P04/Suntracer sl). The weather station is then attached to the holder on the bracket. The installation manual, available in German, English, French, Italian, and Spanish, provides step-by-step instructions for correct installation. The manual is part of the delivery and serves as a guide during installation.
Operational Advantages
The flexible orientation provided by the two ball joints allows optimal positioning of the weather station, improving measurement accuracy. The robust construction and stainless steel screws ensure a long-lasting, maintenance-free installation. The powder-coated surface in white RAL 9003 satin finish is aesthetically pleasing and weather-resistant. Clear compatibility with a wide range of weather stations and sensors reduces the need for multiple mounting systems, simplifying planning and installation.
The delivery includes the bracket with wall mounting plate and weather station holder, three different stainless steel hex cap screws (M4x8, M4x20, M4x25), two of each, and two stainless steel washers DIN125 4,3. Additionally, a datasheet with installation instructions in multiple languages is included.