Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity

Your rating:
Average rating
product review for Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity
( 0 / 5 ) 0 ratings
Elsner 20557
This image may differ from the desired article.
166,23 EUR
( 197,81 EUR incl. VAT )
≈ £138.47  |  ≈ $182.35
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity
Lieske Part No.:1147857
Mfg Part No: 20557
UPC/EAN: 4051996205579
Weight:0.123 kg
Graduated prices net
From piecesPrice per pieces
5163,74 EUR
10161,24 EUR
15158,75 EUR
20156,26 EUR

Product information for Elsner 20557:

The Elsner indoor sensor WGTH gl, type 20557, is a wireless sensor for measuring room temperature and relative humidity. It is specifically designed for use with control systems WS1 Color/Style, WS1000 Color/Style/Connect, and Solexa II (temperature evaluation only). The device transmits measured values wirelessly in the frequency range of 868.0 to 868.6 MHz, with a maximum transmission power of 25 mW. Power supply is via 11 to 28 V DC SELV, with a maximum current consumption of 35 mA. The connection terminal is designed for conductors with a diameter of 0.8 mm s and a stripping length of 5 mm.

Wireless indoor sensor for temperature and humidity

The sensor is designed for indoor use and measures temperature in the range of 5 to +60 °C and relative humidity from 0 to 95 %, with the condition that humidity must not be condensing. The measured values are transmitted to the corresponding control system, and multiple WGTH gl sensors can be registered to a single control system. Registration is performed according to the instructions in the respective control system’s manual. The wireless connection operates in the 868 MHz frequency band, commonly used for decentralized building automation systems in Germany and Europe.

The sensor is suitable for building automation systems, particularly in residential and office buildings, where precise monitoring of room climate conditions is required. It is used in conjunction with the mentioned control systems to adjust heating or ventilation systems according to actual room conditions. Compatibility with WS1 and WS1000 systems allows integration into existing KNX or multifunction control environments. Use in combination with Solexa II is limited to temperature evaluation only.

The device consists of a housing made of real glass and plastic, finished in pure white (RAL 9010). The surface is smooth and visually integrates into modern indoor installations. The sensor is mounted on a device box that must comply with DIN EN IEC 60670-1. The housing itself has a width and height of 55 mm, the projection depth is 8 mm, and the mounting ring measures 71 mm × 71 mm. The total weight of the sensor is approximately 50 g.

Wireless transmission occurs in the 868 MHz band, used for license-free wireless communication in building automation. The maximum transmission power of 25 mW provides sufficient range in indoor environments, although the exact range depends on the surrounding conditions. The power supply voltage of 11 to 28 V DC SELV is safety-compliant and can be drawn, for example, from the control system’s connection plate, provided it has a multifunction input. The current consumption of ≤ 35 mA is low and does not significantly burden the power source.

The sensor is compatible with control systems WS1 Color/Style, WS1000 Color/Style/Connec, and Solexa II. Integration is achieved wirelessly, with the control system receiving and processing sensor data. As accessory, a frame is included in the delivery scope, which can optionally be replaced by a frame from the switch series used in the building. This allows optical harmonization with existing switch elements.

Installation is performed on a device box complying with DIN EN IEC 60670-1. The sensor is mounted onto the box using the carrier plate and frame. Installation does not require special tools, although preparation of the device box is necessary. The connection terminal is designed for conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. Power supply is provided via the specified voltage, which can be supplied by the control system or a separate power supply unit.

The sensor provides reliable and precise measurement of temperature and humidity in indoor environments. Wireless transmission enables flexible installation without cabling between sensor and control system. Low current consumption and SELV power supply enhance safety. Compatibility with various control systems facilitates integration into existing building automation environments. The optical design in pure white (RAL 9010) blends into modern interiors, and the frame can optionally be replaced to match the building’s switch series.

The sensor has a protection rating of IP 20, meaning it is protected against contact with fingers and against solid foreign objects, but not against water or dust. The ambient temperature must be between 5 and +45 °C, and relative humidity may reach 95 %, provided no condensation occurs. Storage temperature ranges from 25 to +70 °C. Overvoltage category III and pollution degree 2 meet requirements for indoor installations with normal pollution.

The delivery scope includes the housing, carrier plate, frame, and a datasheet with installation instructions in German, English, French, Italian, and Spanish.

Wireless indoor sensor, temperature measurement range, humidity measurement range, frequency range, SELV, IP 20

Power supply
Voltage11…28 V DC SELV
Electricity consumption≤ 35 mA
Connection terminal block conductor diameter stripping lengthØ 0.8 mm s, 5 mm
Sensors
Temperature measurement range5…+60°C
Humidity measurement range0...95 %
Technical data
HousingReal glass, plastic
Colourswhite [RAL 9010]
Mountingon device box according to DIN EN IEC 60670-1
Degree of protectionIP 20
Housing dimensions (W × H)55 mm × 55 mm
Depth dimensions8 mm
Dimensions of mounting ring (W × H)71 mm × 71 mm
Weight totalca. 50 g
Ambient temperature5…+45 °C
rF (relative humidity) non-condensing0...95 %
Storage temperature25...+70 °C
Over voltage categoryIII
Pollution degree2
Wireless
Frequency range868.0...868.6 MHz
Transmitting powermax. 25 mW


Questions & answers

What is the delivery time of Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity?

The article Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 20557 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity always at the best possible price. We can give you a discount of 2% on Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity we can offer you a price of 163,74 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Elsner 20557 indoor sensor temperature/humidity pure white
Elsner 20557 WGTH gl pure white 9010 indoor sensor temperature/humidity
166,23 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Elsner 20557 indoor sensor temperature/humidity pure white
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
3 + 2 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.