Elsner 20401 SF-ST interference suppressor for motors
|
62,84 EUR |
|||||||||||
|
( 74,78 EUR incl. VAT ) ≈ £52.35 | ≈ $68.94 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 2035906 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 20401 | ||||||||||
| UPC/EAN: | 4051996204015 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 20401 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Elsner 20401:
Applications
The SF-ST is primarily intended for use in systems with electric motors, for example in manufacturing industry, pump or fan installations, and other drive systems where electromagnetic compatibility (EMC) is important. Typical applications are in the field of industrial electrical engineering, where avoiding interference in control and regulation systems is crucial. Its specific rating for 230 V AC and 16 A makes it suitable for standard mains voltages in Europe.
Functions and Equipment in Detail
The filter integrates two capacitors, each with 0.1 μF, classified as X2 type. These capacitors are specifically designed for suppressing disturbances in AC circuits and offer high protection against overvoltages. Additionally, two resistors, each with 100 Ω, are built in, which, together with the capacitors, effectively dampen interference voltages in the frequency range. The combination of resistor and capacitor forms a noise filter circuit, reducing high-frequency disturbances in the circuit without affecting the motor's rated power.
Technology Explained Simply
The filter's function is based on electrical damping of disturbances generated by commutating or switching processes in motors. These disturbances can be transmitted via the power network to other devices. The SF-ST filters these disturbances using the built-in passive components (capacitors and resistors) and diverts them, preventing them from entering the network. The rated voltage of 230 V AC and the rated current of 16 A correspond to typical values for industrial and household applications. The overvoltage category III and pollution degree 2 indicate use in environments with moderate pollution risk, as commonly found in many industrial installations.
Compatibility and Accessories
The noise filter is designed for use in electrical systems with 230 V AC and a maximum current of 16 A. It is specifically designed for motors operated within these parameters. The installation manual is included in the delivery and is available in multiple languages (German, English, French, Italian, Spanish) to ensure correct installation. The manual contains technical guidance for correct wiring and installation instructions.
Mounting and Installation
The filter is installed in the line between the power supply and the motor. Mounting typically takes place at a suitable location in the circuit, ensuring that electrical connections are secure and correctly made. The housing dimensions are 149 mm (width) × 37 mm (height) × 26 mm (depth), without fuse holder. The total weight is approximately 100 g. The operating temperature range is from 25 °C to +55 °C, with relative humidity up to 95 % (non-condensing) permitted. The storage temperature is from 30 °C to +70 °C, allowing storage in dry, temperature-controlled rooms.
Operational Advantages
By reducing electromagnetic interference, the SF-ST ensures higher operational safety for electronic devices near the motor. This prevents false alarms, data loss, or failures in control and regulation systems. The IP54 protection rating provides protection against dust and splashing water, making it suitable for indoor use with moderate humidity and dust risk. The integrated components are designed for long service life, minimizing maintenance and replacement intervals.
| Technical data | |
| Housing | Plastic |
| Degree of protection | IP54 |
| Dimensions without fuse holder (W × H × D) | 149 mm x 37 mm x 26 mm |
| Weight total | ≈ 100 g |
| Ambient temperature | 25…+55 °C |
| rF (relative humidity) non-condensing | 0...95 % |
| Storage temperature | 30...+70 °C |
| Over voltage category | III |
| Pollution degree | 2 |
| Rated voltage | 230 V AC |
| Rated current | 16 A |
| Integrated capacitors | 2 × 0.1 μF/X2 |
| Integrated resistors | 2 × 100 Ω |
Questions & answers
What is the delivery time of Elsner 20401 SF-ST interference suppressor for motors?
The article Elsner 20401 SF-ST interference suppressor for motors is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Elsner 20401 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Elsner 20401 SF-ST interference suppressor for motors always at the best possible price. We can give you a discount of 2% on Elsner 20401 SF-ST interference suppressor for motors if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Elsner 20401 SF-ST interference suppressor for motors we can offer you a price of 61,90 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

