Elsner 20401, EAN: 4051996204015

Elsner 20401 SF-ST noise filter for motors

Elsner 20401 SF-ST noise filter for motors

Lieske Part No. 2035906
Mfg Part No 20401
EAN-Code 4051996204015
Manufacturer Elsner
Here only 62,84 EUR
74,78 EUR incl. VAT

Further information for Elsner 20401 SF-ST noise filter for motors

Technical data
HousingPlastic
Degree of protectionIP54
Dimensions without fuse holder (W × H × D)149 mm x 37 mm x 26 mm
Weight total≈ 100 g
Ambient temperature25…+55 °C
rF (relative humidity) non-condensing0...95 %
Storage temperature30...+70 °C
Over voltage categoryIII
Pollution degree2
Rated voltage230 V AC
Rated current16 A
Integrated capacitors2 × 0.1 μF/X2
Integrated resistors2 × 100 Ω
The SF-ST noise filter from Elsner is a specially designed noise module for use with motors, reducing electromagnetic interference pulses generated during motor operation. These disturbances can cause malfunctions in adjacent electronics, particularly in industrial or technical installations. The filter serves as a protective measure against high-frequency disturbances in the circuit, ensuring a more stable and interference-free operating environment. It is housed in a plastic housing providing the necessary mechanical stability and insulation.

Applications

The SF-ST is primarily intended for use in systems with electric motors, for example in manufacturing industry, pump or fan installations, and other drive systems where electromagnetic compatibility (EMC) is important. Typical applications are in the field of industrial electrical engineering, where avoiding interference in control and regulation systems is crucial. Its specific rating for 230 V AC and 16 A makes it suitable for standard mains voltages in Europe.

Functions and Equipment in Detail

The filter integrates two capacitors, each with 0.1 μF, classified as X2 type. These capacitors are specifically designed for suppressing disturbances in AC circuits and offer high protection against overvoltages. Additionally, two resistors, each with 100 Ω, are built in, which, together with the capacitors, effectively dampen interference voltages in the frequency range. The combination of resistor and capacitor forms a noise filter circuit, reducing high-frequency disturbances in the circuit without affecting the motor's rated power.

Technology Explained Simply

The filter's function is based on electrical damping of disturbances generated by commutating or switching processes in motors. These disturbances can be transmitted via the power network to other devices. The SF-ST filters these disturbances using the built-in passive components (capacitors and resistors) and diverts them, preventing them from entering the network. The rated voltage of 230 V AC and the rated current of 16 A correspond to typical values for industrial and household applications. The overvoltage category III and pollution degree 2 indicate use in environments with moderate pollution risk, as commonly found in many industrial installations.

Compatibility and Accessories

The noise filter is designed for use in electrical systems with 230 V AC and a maximum current of 16 A. It is specifically designed for motors operated within these parameters. The installation manual is included in the delivery and is available in multiple languages (German, English, French, Italian, Spanish) to ensure correct installation. The manual contains technical guidance for correct wiring and installation instructions.

Mounting and Installation

The filter is installed in the line between the power supply and the motor. Mounting typically takes place at a suitable location in the circuit, ensuring that electrical connections are secure and correctly made. The housing dimensions are 149 mm (width) × 37 mm (height) × 26 mm (depth), without fuse holder. The total weight is approximately 100 g. The operating temperature range is from 25 °C to +55 °C, with relative humidity up to 95 % (non-condensing) permitted. The storage temperature is from 30 °C to +70 °C, allowing storage in dry, temperature-controlled rooms.

Operational Advantages

By reducing electromagnetic interference, the SF-ST ensures higher operational safety for electronic devices near the motor. This prevents false alarms, data loss, or failures in control and regulation systems. The IP54 protection rating provides protection against dust and splashing water, making it suitable for indoor use with moderate humidity and dust risk. The integrated components are designed for long service life, minimizing maintenance and replacement intervals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035906
qrcode für Elsner 20401 SF-ST noise filter for motors