Cable support systems, cable trays and accessories in Wiring systems
Cable support systems, cable trays and accessories from Niedax
 |
 Niedax GAQ-3/4 set cross anchoring rope - D 3mm L = 4m steel
GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct ...Lieske Part No.: 431869 Mfg Part No: GAQ-3/4 |
197,28 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GAQ-3/5 set cross anchoring rope - D3mm 5m steel zinc/chrome
GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct ... Lieske Part No.: 388819 Mfg Part No: GAQ-3/5 |
216,00 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GASSZ cable collet ,
GRIPPLE rope tensioning pliers, special tool for tensioning GRIPPLE wire ropes made of galvanized steel or stainless steel, light and compact tool, for GRIPPLE rope systems. For personal safety, ... Lieske Part No.: 969542 Mfg Part No: GASSZ |
233,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GASUM3 GRIPPLE, cable sheathing, D 3, 1000 mm plastic PUR
GRIPPLE rope sheathing, for GRIPPLE wire ropes made of galvanized steel or stainless steel to protect against condensation when in contact with pipes, to reduce noise on pipes and to minimize friction ... Lieske Part No.: 328345 Mfg Part No: GASUM3 |
-95% 5,18 EUR 109,15 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GATRAP-3 trapeze
GRIPPLE trapezoidal lock with trapezoidal washer, for creating several levels in one suspension, for flush mounting, for GRIPPLE cable system. The load-bearing capacity F only applies if the cable is ... Lieske Part No.: 681280 Mfg Part No: GATRAP-3 |
772,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GATWISTER Twister Clip
GRIPPLE Twisterclip, rope end holder for securing wire rope ends or connecting a rope reserve (without cutting to length) to the main rope, halogen-free. Dimensions (approx. dimensions) for rope ... Lieske Part No.: 459385 Mfg Part No: GATWISTER |
37,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GDS78S devices GDS channel cover 78 S, 78x2000mm smooth galvanized zinc-
NIEDAX - Make: GDS 78 S Device channel covers, of continuously galvanized steel according to DIN EN 10346, including two equipotential terminals GPK 63 2 m delivery length. VDE certified! for ... Lieske Part No.: 663925 Mfg Part No: GDS78S |
351,65 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GM5030M10F GM 5030 F M10 Slide nut, thread M, DIN EN ISO 1461 GM 5030 F M10
Sliding nut, without screw, for C-anchor rails with a clear inside width of = 43 mm, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails: 2987 with 26 mm ... Lieske Part No.: 783631 Mfg Part No: GM5030M10F Type: GM 5030 M10 F |
562,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GM5030M12F GM 5030 F M12 Slide nut M12 DIN EN ISO 146 hot-dip galvanized
Sliding nut, without screw, for C-anchor rails with a clear inside width of = 43 mm, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails: 2987 with 26 mm ... Lieske Part No.: 113732 Mfg Part No: GM5030M12F Type: GM 5030 M12 F |
1.157,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GM5030M8F GM 5030 F M8 nut M8, hot-dip galvanized to DIN EN ISO 1461
Sliding nut, without screw, for C-anchor rails with a clear inside width of = 43 mm, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails: 2987 with 26 mm ... Lieske Part No.: 519847 Mfg Part No: GM5030M8F Type: GM 5030 M8 F |
-9% 545,00 EUR 596,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GMZF M10-18 E5 sliding nut geared with fixing aid thread M10
Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and ... Lieske Part No.: 1332673 Mfg Part No: GMZFM10-18E5 Type: GMZF M10-18 E5 |
1.276,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GMZFM10-22E5 slide nut serrated, stainless steel M10 threaded m.Fixierhilfe
Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and ... Lieske Part No.: 547194 Mfg Part No: GMZFM10-22E5 |
1.276,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GMZF M6-22 E5 sliding nut toothed with fixing aid thread M6
Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and ... Lieske Part No.: 467840 Mfg Part No: GMZFM6-22E5 Type: GMZF M6-22 E5 |
1.235,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GMZF M8-18 E5 sliding nut geared with fixing aid thread M8
Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and ... Lieske Part No.: 1332680 Mfg Part No: GMZFM8-18E5 Type: GMZF M8-18 E5 |
1.249,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GMZ Niedax slide nuts M6 F,
NIEDAX - Make: GMZ M6 F Slide nut, steel C-channel bars Model 2985, 2986, 2988 and 299 with slot width 8 mm and for C-anchor rails model 2987, 299 , 2992, 2994, 2995, 2996 and 2996Z with 22 / 26 mm ... Lieske Part No.: 755813 Mfg Part No: GMZM6F |
503,91 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GMZM8F GMZ F slide nuts M8, M8 F GMZ
Sliding nut, without screw, can be used at any point with a fastening screw in the profile. Use for: Anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width 2996Z with 22 mm slot ... Lieske Part No.: 246686 Mfg Part No: GMZM8F Type: GMZ M8 F |
521,73 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR40.040 wire mesh tray ,
Mesh cable tray according to DIN EN 61537, U-shaped, made of steel wires, spot-welded. Please order joint connectors separately. Dimensions (approx. dimensions) outside H x W: 40 x 40 mm Wire Ø: 3.5 ... Lieske Part No.: 833572 Mfg Part No: GR40.040 Type: GR 40.040 |
231,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR40.040E3 mesh cable tray GR 40,040 E3
NIEDAX - Make: GM 40.040 E3 mesh cable tray in accordance with DIN EN 61537, steel wire, stainless steel, steel, material no. 1.4301, joint connector GRV 6 E3 must be ordered separately. Exterior ... Lieske Part No.: 325691 Mfg Part No: GR40.040E3 |
532,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR40.040F mesh cable tray,
Mesh cable tray in accordance with DIN EN 61537, U-shaped, made of steel wires, spot-welded. Please order joint connectors separately. Dimensions (approx. dimensions) outside H x W: 40 x 40 mm Wire ... Lieske Part No.: 735661 Mfg Part No: GR40.040F Type: GR 40.040 F |
252,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR60.060E3 mini mesh gutter U-shaped 60x60mm D3.5mm stainless steel
Mini mesh cable tray according to DIN EN 61537, U-shaped, made of steel wires, spot-welded. Please order joint connectors separately. Dimensions (approx. dimensions) outside H x W: 60 x 60 mm Wire ... Lieske Part No.: 606949 Mfg Part No: GR60.060E3 Type: GR 60.060 E3 |
457,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR60.100E3 mesh cable tray GR 60.100 E3 60x100x3000mm stainless steel
NIEDAX - Make: GM sixth E3 mesh cable tray according to DIN EN 6 537, made of steel wire, stainless steel, steel, material no. .43 , Splice plates must be ordered separately. Exterior ... Lieske Part No.: 776555 Mfg Part No: GR60.100E3 |
573,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR60.150E3 stainless steel mesh cable tray GR 60.150E3, 60x150mm
Mesh cable tray in accordance with DIN EN 61537, U-shaped, made of steel wires, spot-welded. Please order joint connectors separately. Dimensions (approx. dimensions) outside H x W: 60 x 150 mm Wire ... Lieske Part No.: 782049 Mfg Part No: GR60.150E3 Type: GR 60.150 E3 |
674,19 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR60.200E3 mesh cable tray GR 60.200 E3, 60x200mm stainless steel
NIEDAX - Make: GM 60.200 E3 Mesh cable tray in accordance with DIN EN 61537, steel wire, stainless steel, steel, material no. 1.4301, splice plates must be ordered separately. Exterior ... Lieske Part No.: 631673 Mfg Part No: GR60.200E3 |
782,89 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax GR60.300E3 mesh gutter U-shaped 60x300mm d=4.0mm stainless steel
Mesh cable tray in accordance with DIN EN 61537, U-shaped, made of steel wires, spot-welded. Please order joint connectors separately. Dimensions (approx. dimensions) outside H x W: 60 x 300 mm Wire ... Lieske Part No.: 638992 Mfg Part No: GR60.300E3 Type: GR 60.300 E3 |
1.261,06 EUR
plus delivery charges
Delivery time on requestinfo_outline
|