Cable support systems, cable trays and accessories in Wiring systems

500+

Articles

✓

Standards-compliant

⚡

B2B trade

B2B

In stock

Kabeltragsysteme, Gitterrinnen und Zubehör

Kabeltragsysteme, Gitterrinnen und Zubehör – specialised products from the Leitungsführungssysteme range. Industry-Electronics offers a comprehensive assortment for professional use in industry, commerce and trade.

All products are from reputable manufacturers and comply with applicable DIN/VDE standards. Benefit from competitive B2B pricing, fast delivery and expert technical advice.

Technical advice: +49 (0)7666 / 88499-0 | sales@industry-electronics.com

Leading brands

✓	OBO Bettermann
✓	Niedax
✓	Pemsa
✓	Legrand
✓	Meka

Top sellers in Cable support systems, cable trays and accessories

DEHN 910642 LWLDSI18M optical
fiber D2.2 mm L18 m for signal
57,66 EUR

DEHN 907430 DRLPD180 surge
arrester rapid LSA for 1
phase conductor Un180V
43,60 EUR

Erico 311731 Wall console
CAC60 P1 L=600 mm 41x41x2.
5 mm H=50 mm
19,94 EUR

Flexa 16144000000 PS4N
partition strip for
cable chain PL4
13,51 EUR

Legrand PN120S slide nut V4A
M12
10,07 EUR

Niedax FLM6X12 flat round
head screw M6 similar to
DIN 603 L12 mm blue
7,96 EUR

Niedax HUF50/300 hanging
strut U-profile 50x22x300
mm galvanized
27,26 EUR

Niedax RL60.200 cable duct
60x200x3000 mm T0.9 mm
yellow galvanized
193,51 EUR

Niedax 2930/2VO 2930/2 VO
meter rail, C-profile SW
5.4 mm 15x8x2000 mm
472,15 EUR

Niedax RW60 partition strip
55x3000 mm T0.75 mm band
galvanized DIN EN 10346
58,71 EUR

Niedax GRSM6E3 hook screw
thread M6 with toothed
flange nut
87,40 EUR

Cable support systems, cable trays and accessories from ASUS

ASUS TUF GAMING B650-PLUS AM5 DDR5 ATX MB

Lieske Part No.: 2013910
Mfg Part No: 90MB1BY0-M0EAY0

178,36 EUR

≈ £150.54 | ≈ $199.76

Delivery time from supplier's stock (ca.) 9 workdays

Cable support systems, cable trays and accessories from DEHN

DEHN 106329 BW90B172116V2A mounting angle with connection bolt M8 With 3 mounting holes for 3 different sizes of DEHNgate, e.g. Art. No. 1x 929 042 + 1x 929 057 + 1x (929 043, 929 044, 929 045 or 929 059).

Lieske Part No.: 185786
Mfg Part No: 106329
Type: BW90 B17 21 16 V2A

51,87 EUR 52,47 EUR

≈ £43.78 | ≈ $58.09

Made to order · Delivery time approx. 20 workdays

DEHN 123109 FS101000FGALV2A catch device D120–240 catch spacing D10 mm L Catch rod for protecting solar thermal modules or photovoltaic generators or other structures on pitched roofs. The installation of the catch rod is based on a clamping technique. The step-adjustable ...

Lieske Part No.: 573826
Mfg Part No: 123109
Type: FS 10 1000 FG AL V2A

36,38 EUR

≈ £30.70 | ≈ $40.75

Made to order · Delivery time approx. 20 workdays

DEHN 900220 DBM1255S surge arrester Type 1 bloc Maxi S 1-pole 255 V AC Single-pole, coordinated DEHNbloc Maxi S lightning current arrester, type 1 according to EN 61643-11, based on spark gaps with integrated arrester backup fuse for mounting on industrial busbar systems.

Lieske Part No.: 225823
Mfg Part No: 900220
Type: DBM 1 255 S

455,81 EUR 461,14 EUR

≈ £384.70 | ≈ $510.51

Made to order · Delivery time approx. 20 workdays

DEHN 906100 DPGLSA30P equipotential bonding enclosure for 3 LSA strips 10/2 DPG LSA is a completely pre-assembled housing system with LSA mounting bracket and enables the optimized use of arresters and shield connection system (contact roller spring).

Lieske Part No.: 273860
Mfg Part No: 906100
Type: DPG LSA 30 P

282,53 EUR 285,81 EUR

≈ £238.46 | ≈ $316.43

Made to order · Delivery time approx. 20 workdays

DEHN 906103 DPGLSA220P equipotential bonding enclosure for 22 LSA strips 10/2 DPG LSA is a completely pre-assembled housing system with LSA mounting bracket and enables the optimized use of arresters and shield connection system (contact roller spring).

Lieske Part No.: 716066
Mfg Part No: 906103
Type: DPG LSA 220 P

459,99 EUR 465,40 EUR

≈ £388.23 | ≈ $515.19

Made to order · Delivery time approx. 20 workdays

DEHN 907216 DPL10G3110FSD surge arrester rapid LSA for 10 pairs of conductors Plug-in magazine for 10 DA with three-pole gas discharge arresters for almost all applications. The arresters have a fail-safe function and an additional optical display after the fail-safe is ...

Lieske Part No.: 710332
Mfg Part No: 907216
Type: DPL 10 G3 110 FSD

222,49 EUR 225,13 EUR

≈ £187.78 | ≈ $249.19

Made to order · Delivery time approx. 20 workdays

DEHN 907219 GDT230B3FSD gas discharge arrester 230 V for rapid LSA with FailSafe function Powerful replacement gas discharge arresters for DRL 10 or BM 10 DRL. Three-pole design with common arc chamber for a uniform protection level both wire-wire and wire-earth.

Lieske Part No.: 614270
Mfg Part No: 907219
Type: GDT 230 B3 FSD

15,39 EUR 15,54 EUR

≈ £12.99 | ≈ $17.24

Made to order · Delivery time approx. 20 workdays

DEHN 907422 DRLRE24 surge arrester rapid LSA for 1 pair cable Un 24 V Protective plug 1 DA energetically coordinated with DRL plug-in magazine as single-stage terminal device protection with decoupling impedances. Particularly suitable for signal circuits with a common ...

Lieske Part No.: 880545
Mfg Part No: 907422
Type: DRL RE 24

47,97 EUR 48,51 EUR

≈ £40.49 | ≈ $53.73

Made to order · Delivery time approx. 20 workdays

DEHN 907423 DRLRE48 surge arrester rapid LSA for 1 pair cable Un 48 V Protective plug 1 DA energetically coordinated with DRL plug-in magazine as single-stage terminal device protection with decoupling impedances. Particularly suitable for signal circuits with a common ...

Lieske Part No.: 723018
Mfg Part No: 907423
Type: DRL RE 48

48,55 EUR 49,10 EUR

≈ £40.98 | ≈ $54.38

Made to order · Delivery time approx. 20 workdays

DEHN 907430 DRLPD180 surge arrester rapid LSA for 1 phase conductor Un180V Protective plug 1 DA energetically coordinated with DRL plug-in magazine as single-stage terminal device protection. Low protection level wire-wire and integrated overcurrent protection for ADSL, ISDN ...

Lieske Part No.: 475557
Mfg Part No: 907430
Type: DRL PD 180

43,60 EUR 44,15 EUR

≈ £36.80 | ≈ $48.83

Made to order · Delivery time approx. 20 workdays

DEHN 907470 DRLHD24 surge arrester rapid LSA for 1 pair cable Un 24V Protection plug 1 DA energetically coordinated with DRL plug-in magazine as single-stage terminal device protection for high-frequency transmissions such as G.703 or ISDN U2m, S2m and S0. Installation ...

Lieske Part No.: 368287
Mfg Part No: 907470
Type: DRL HD 24

45,88 EUR 46,43 EUR

≈ £38.72 | ≈ $51.39

Made to order · Delivery time approx. 20 workdays

DEHN 910631 DSIE3 telecommunication and reception module signal E 3 DEHNsignal E 3 optical fibre receiver module for selective status display / collective fault reporting of 3 coordinated DEHNbloc Maxi S and, if applicable, DEHNgap Maxi S lightning current arresters ...

Lieske Part No.: 104780
Mfg Part No: 910631
Type: DSI E 3

210,14 EUR 212,65 EUR

≈ £177.36 | ≈ $235.36

Made to order · Delivery time approx. 20 workdays

DEHN 910642 LWLDSI18M optical fiber D2.2 mm L18 m for signal 18 meters of plastic optical fiber, preferably for use with DEHNbloc Maxi S.

Lieske Part No.: 699615
Mfg Part No: 910642
Type: LWL DSI 18M

57,66 EUR 58,31 EUR

≈ £48.67 | ≈ $64.58

Made to order · Delivery time approx. 20 workdays

Cable support systems, cable trays and accessories from Eaton

Eaton 168823 BB-EV-EC/2-3P accessory for Verschienungssystem end cap 2+3ph Accessories for busbar system

Lieske Part No.: 215884
Mfg Part No: 168823
Type: BB-EV-EC/2-3P

21,66 EUR 22,57 EUR

≈ £18.28 | ≈ $24.26

Made to order · Delivery time approx. 20 workdays

Eaton 168835 BB-EVF-16/1P-2MU phase busbar 1-phase 16 mm² fork 1 m Busbar for FI, LS, combination, surge protection, delivery without end caps, end caps available 1- to 4-pole, end caps can be broken out for further busbar connection, design according to EN ...

Lieske Part No.: 375870
Mfg Part No: 168835
Type: BB-EVF-16/1P-2MU

479,17 EUR

≈ £404.42 | ≈ $536.67

Made to order · Delivery time approx. 20 workdays

Eaton 168853 BB-EVP-16/1P-1MU phase busbar 1Ph 16 mm² pin 1 m Busbar for FI, LS, combination, surge protection, delivery without end caps, end caps available 1- to 4-pole, end caps can be broken out for further busbar connection, design according to EN ...

Lieske Part No.: 582154
Mfg Part No: 168853
Type: BB-EVP-16/1P-1MU

385,12 EUR

≈ £325.04 | ≈ $431.33

Made to order · Delivery time approx. 20 workdays

Eaton 168878 BB-EV-EC/1P accessory for trunking 1-phase BB-EV-EC/1P Accessories for busbar system

Lieske Part No.: 375867
Mfg Part No: 168878
Type: BB-EV-EC/1P

36,10 EUR 37,62 EUR

≈ £30.47 | ≈ $40.43

Made to order · Delivery time approx. 20 workdays

Eaton 168879 BB-EV-EC/N accessory for Verschienungssystem end cap neutral Accessories for busbar system

Lieske Part No.: 582152
Mfg Part No: 168879
Type: BB-EV-EC/N

9,03 EUR 9,41 EUR

≈ £7.62 | ≈ $10.11

Made to order · Delivery time approx. 20 workdays

Cable support systems, cable trays and accessories from Erico

Erico 186078 CATHPMBC nVent CADDY Cat HP J-Hook Mod Clip to BC Beam Clamp Eine werkzeuglose Lösung für Trägerinstallationen, die ein BC-Befestigungselement mit jedem CAT HP J-Haken verbindet, 16mm max Flansch

Lieske Part No.: 606697
Mfg Part No: 186078
Type: CATHPMBC

2,11 EUR 2,20 EUR

≈ £1.78 | ≈ $2.36

Made to order · Delivery time approx. 20 workdays

Erico 311693 CADDY KA25H0150S6 strut mounting rail console type A Bracket or console for wall mounting, type A. S316, 2.5 mm x 150 mm x 41 mm x 41 mm.

Lieske Part No.: 2068196
Mfg Part No: 311693
Type: CADDY KA25H0150S6

1.557,81 EUR 1.623,40 EUR

≈ £1,314.79 | ≈ $1,744.75

Made to order · Delivery time approx. 20 workdays

Erico 311696 Wall console CADDY CAC60 P2 Caddy ERISTRUT Bracket or console for wall mounting, type A. S316, 2.5 mm x 600 mm x 41 mm x 41 mm.

Lieske Part No.: 831308
Mfg Part No: 311696
Type: CADDY KA25H0600S6

123,49 EUR 128,69 EUR

≈ £104.23 | ≈ $138.31

Made to order · Delivery time approx. 20 workdays

Erico 311702 CADDY KA25H0150HD wall console CADDY 41x41x2.5 mm, L=150 mm, Bracket or console for wall mounting, type A. Steel, HD, 2.5 mm x 150 mm x 41 mm x 41 mm.

Lieske Part No.: 1317372
Mfg Part No: 311702
Type: CADDY KA25H0150HD

218,31 EUR 227,50 EUR

≈ £184.25 | ≈ $244.51

Made to order · Delivery time approx. 20 workdays

Erico 311703 Wall console CAC20-3-200MM Caddy ERISTRUT Bracket or console for wall mounting, type A. Steel, HD, 2.5 mm x 200 mm x 41 mm x 41 mm.

Lieske Part No.: 118894
Mfg Part No: 311703
Type: CADDY KA25H0200HD

246,81 EUR 257,20 EUR

≈ £208.31 | ≈ $276.43

Made to order · Delivery time approx. 20 workdays

1 2 3 4 5 6 8 10 .. 60 .. 110 .. 160 .. 210 .. 260 .. 310 313

Kabeltragsysteme, Gitterrinnen und Zubehör – Professional range for the specialist contractor

Industry-Electronics is your reliable B2B partner for Kabeltragsysteme, Gitterrinnen und Zubehör. With over 20 years of experience in specialist trade, we offer standards-compliant products from reputable manufacturers at competitive prices.

Whether single items for repair or larger quantities for projects – our technical team supports you in product selection and is happy to provide individual quotes. Contact us at +49 (0)7666 / 88499-0.

Typical Application Areas

⚙ Heavy cables	🏭 Industrial halls	🔧 Data centres	✓ Cable tray	🔌 Cable ladder

📊 Cable bundles	📋 Tunnel installation	🔍 Offshore	🚀 Chemical industry	🎓 Mining

Why Industry-Electronics?

⚡ Standards-compliant products All items comply with applicable DIN, VDE and EN standards for professional electrical installation.	✓ Fair B2B pricing Competitive prices and special conditions for trade and contractors on request.	🔧 Expert advice Personal consultation by installation technology experts at +49 (0)7666 / 88499-0.

🚀 Fast delivery Many items in stock with prompt dispatch throughout Germany and Europe.	🏭 Pure B2B trade No private customer business – we understand the requirements of professional electrical contractors.	⚙ Wide assortment Over 500,000 articles in our total range – everything from one source for the electrical installer.