Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 102492

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 2 markers on. Type: WIC3-7 PA-VT C
Quantity: 5 PCS.
Sales unit: 500 pieces
Lieske Part No.: 930748

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 649105

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 187919

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 973024

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 600555

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 182162

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 500 pieces
Lieske Part No.: 714845

The WIC Kennzeichnungsmarkierer are particularly suitable for subsequent mounting on cables. The high voltage of the marker material is firmly attached to cables. The installation simply by click-through WIC tool tool. The WIC Tool tool can be used for all sizes and takes up to 20 markers on. Type: WIC3-/-PA-YE-T1 item: 100 ST.
Sales unit: 500 pieces
Lieske Part No.: 310403

Type: WIC3-<ground/

Erde Symbol PA66 YE 500 S

Sales unit: 500 pieces
Lieske Part No.: 392804

Type: WIC3-ALNR-PA-YE-T1

Sales unit: 500 pieces
Lieske Part No.: 933652

Pre-printed cable markers are quick and easy to use. Can be clicked on. Ideal for subsequent installation or for maintenance and repair work. Perfect alignment of the character combinations by snapping the adjacent markers into place. Firm fit even in the event of vibrations thanks to high material tension. WIC Tool can be used for all four sizes. The tool can be equipped with up to 20 markers. Available in yellow and in the colors of the international resistance color code. Other colors on request. 2-digit markings such as L1, L2, L3 and PE available. The color of the marker carrier indicates the type: WIC0 (green), WIC1 (red), WIC2 (blue), WIC3 (yellow). Accessories available for marking cables from 6 mm² to 25 mm² (WICA-AC10-25) and up to 95 mm² (WICA-ACT-BK). WIC markers are applied to the cable by simply pressing them on with the ergonomically developed WIC tool or - if no tool is available - simply by hand. Simply insert the markers into the tool, press the first marker onto the cable, turn and apply the next marker. Once all markers have been applied to the cable, they are pushed together until the lock clicks into place. Manual application is recommended for marking fiber optic cables. Larger cable diameters (6 mm² to 95 mm²) can be marked using the WIC accessories WICA. The sizes WIC0, WIC1 and WIC2 are designed to match these.
Sales unit: 100 pieces
Lieske Part No.: 1347862

Type: QGEPRPH-103-GN Geprüft 103 GN 1 RO

Lieske Part No.: 213512

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 506462

Type: CWMS 0 260 YE 1 PA

Lieske Part No.: 924956

Type: CWMS 1 260 YE 1 PA

Lieske Part No.: 816420

Type: CWMS 2 260 YE 1 PA

Lieske Part No.: 719344

Type: CWMS 3 260 YE 1 PA

Lieske Part No.: 466046

Type: CWMS 4 260 YE 1 PA

Lieske Part No.: 307085

Type: CWMS 5 260 YE 1 PA

Lieske Part No.: 725660

The pre-printed labels made of weatherproof fabric can be used for indoor and outdoor markings. The material adapts well to uneven surfaces and adheres even to difficult surfaces. The labels are supplied on handy cards from which they are easy to peel off.
Lieske Part No.: 563339

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 204290

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 230005

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 353720

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 917089

Type: CWMS pen 260 YE 1 PA

Lieske Part No.: 515422

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 525110

Labels made of flexible cotton fabric. Optimal hold even on difficult surfaces. Also for use on uneven surfaces. Supplied on handy cards. Removable adhesive. Suitable for permanent and temporary labeling. The labels are suitable for labeling cables, lines and connections and for use as cable markers or cable flags for very small conductor diameters. The products are ideal for on-site installation.
Lieske Part No.: 734900

With the pre-printed labels are made &#8203;&#8203;of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. Labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-0-260-YE
Lieske Part No.: 137139

With the pre-printed labels are made &#8203;&#8203;of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-
-26 Ye item:
ST.
Lieske Part No.: 105835

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates.The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-2-26-YE item:
ST.
Lieske Part No.: 778909

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates.The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-3-26-YE item:
ST.
Lieske Part No.: 970745

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid.The material adapts well to uneven surfaces and adheres even to difficult substrates. The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-4-26-YE item:
ST.
Lieske Part No.: 894436

With the pre-printed labels are made &#8203;&#8203;of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. Labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-5-260-YE
Lieske Part No.: 401612

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-6-26-YE item:
ST.
Lieske Part No.: 982764

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates.

The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-7-260-YE
Lieske Part No.: 440906

With the pre-printed labels are made &#8203;&#8203;of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. Labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-8-260-YE
Lieske Part No.: 118571

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-9-26-YE item:
ST.
Lieske Part No.: 510698

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates.

The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML-+-260-YE
Lieske Part No.: 566502

With the pre-printed labels are made of weather resistant fabric labels for indoor and outdoor use are invalid. The material adapts well to uneven surfaces and adheres even to difficult substrates. The labels are supplied on handy cards, from which they can be peeled off easily. Type: CWML--9-26-YE item:
ST.
Lieske Part No.: 537896

Etiketten aus flexiblem Baumwollgewebe. Optimaler Halt selbst auf schwierigen Untergründen. Auch für die Anwendung auf unebenen Oberflächen. Lieferung auf handlichen Karten. Wiederablösbarer Klebstoff. Zur dauerhaften und temporären Kennzeichnung geeignet. Die Etiketten eignen sich für die Kennzeichnung von Kabeln, Leitungen und Anschlüssen sowie für die Anwendung als Kabelmarkierer oder Kabelfahne bei sehr kleinen Leiterdurchmessern. Die Produkte sind ideal für die Installation vor Ort.
Lieske Part No.: 811998

Helatag 1101 (white) Part Number: 594-01101
Features:
For identification of various electrical and electronic products and electrical cabinets
for use on flat and smooth surfaces
clean typeface and crisp text, bar codes and graphics
Trouble printing with easy and efficient label design with software TagPrint Pro
MS Windows Word printer templates, www. HellermannTyton .de (download area)
application
Wherever a special clean typeface is necessary, for example when printing barcodes, these labels are used. Due to the high resolution of laser printers are also suitable for the production of nameplates.
For problem-free printing, we recommend the software TagPrint Pro. It contains all the labels listed, which can be accessed immediately. Consuming installation is eliminated. For simple applications we recommend our MS Windows Word printer templates, www. HellermannTyton .de (download area).
Helatag 1101 (White) is used for the following industrial sectors
solar systems
Wind turbines
railway &
Electrical Wholesale
shipbuilding
defense industry
Lieske Part No.: 566663

The special surface finish of Helatag labels for laser printers provides good leadership in printer and a lasting, clear marking. The print is immediately smudge-resistant and razor sharp. The material is highly resistant to chemicals.
Model: YE 1102 YE TAG120LA4-1102-1 PA

Lieske Part No.: 535572

Type: TAG02LA4-1104-CLWH 1104 CL,WH 1 PA

Lieske Part No.: 710233

Type: TAG162LA4-1101-WH 1101 WH 1 PA Package: 1 PC.
Lieske Part No.: 570928

Zur Kennzeichnung von diversen elektrischen und elektronischen Produkten sowie von Schaltschränken. Für die Anwendung auf ebenen und glatten Flächen. Sauberes Schriftbild und gestochen scharfe Texte, Barcodes und Grafiken. Problemloses Bedrucken sowie einfache und effiziente Etikettengestaltung mit der Software TagPrint Pro. MS-Windows Word Druckvorlagen unter www.HellermannTyton.de (Downloadbereich). Überall dort, wo ein besonderes sauberes Schriftbild notwendig ist, beispielsweise bei der Bedruckung mit Barcodes, werden diese Etiketten eingesetzt. Aufgrund der hohen Auflösung von Laserdruckern sind sie auch zur Herstellung von Typenschildern geeignet. Zum problemlosen Bedrucken empfehlen wir die Software TagPrint Pro. Sie enthält alle aufgeführten Etiketten, die sofort aufgerufen werden können. Aufwendiges Einrichten entfällt. Für einfache Anwendungen empfehlen wir unsere MS-Windows Word Druckvorlagen unter www.HellermannTyton.de (Downloadbereich).
Lieske Part No.: 140245

Zur Kennzeichnung von diversen elektrischen und elektronischen Produkten sowie von Schaltschränken. Für die Anwendung auf ebenen und glatten Flächen. Sauberes Schriftbild und gestochen scharfe Texte, Barcodes und Grafiken. Problemloses Bedrucken sowie einfache und effiziente Etikettengestaltung mit der Software TagPrint Pro. MS-Windows Word Druckvorlagen unter www.HellermannTyton.de (Downloadbereich). Überall dort, wo ein besonderes sauberes Schriftbild notwendig ist, beispielsweise bei der Bedruckung mit Barcodes, werden diese Etiketten eingesetzt. Aufgrund der hohen Auflösung von Laserdruckern sind sie auch zur Herstellung von Typenschildern geeignet. Zum problemlosen Bedrucken empfehlen wir die Software TagPrint Pro. Sie enthält alle aufgeführten Etiketten, die sofort aufgerufen werden können. Aufwendiges Einrichten entfällt. Für einfache Anwendungen empfehlen wir unsere MS-Windows Word Druckvorlagen unter www.HellermannTyton.de (Downloadbereich).
Lieske Part No.: 140246

The special surface treatment, the Helatag labels for laser printer provides good leadership in the printer and a durable, clear labeling. The print is immediately smear-resistant and razor sharp. The material is highly resistant to chemicals. Type: TAG124LA4-1101-WH item: 5000 ST.
Lieske Part No.: 420108

Type: TAG145LA4-1104-CLWH 1104 CL,WH 1 PA

Lieske Part No.: 749256

Hochwertige selbstlaminierende Etiketten. Für die Bedruckung mit handelsüblichen Laserdruckern. Geeignet für die Kennzeichnung von Kabeln und Leitungen. Hervorragender Schutz gegen Feuchtigkeit und mechanischen Abrieb durch das Schutzlaminat. Etikettenmaterial 1104 (25 µm) für Standardanwendungen. Bessere Haftung durch abgerundete Ecken. Stabile Kunststoffverpackung sorgt für lange Verwendbarkeit der Etiketten. Problemloses Bedrucken sowie einfache und effiziente Etikettengestaltung mit der Software TagPrint Pro. MS-Windows Word Druckvorlagen für einfache Anwendungen unter www.HellermannTyton.de (Mediathek). Aufgrund des hochwertigen Polyestermaterials sind diese Etiketten besonders für die selbstlaminierende Ader- und Kabelkennzeichnung geeignet. Helatag 1104 besteht aus einem bedruckbaren Bereich und einem Schutzlaminat, der die Bedruckung vor Staub, Schmutz und mechanischer Abnutzung schützt. Für Kabelmarkierer mit einer Gesamtlänge über ca. 100 mm verwenden wir ein etwas dickeres Material (Helatag 1105). Dadurch lässt sich der Markierer bei dieser Größe einfacher vom Bogen mit der Hand ablösen und vereinfacht durch die größere Materialsteifigkeit das Aufbringen auf das große Kabel oder Rohr.
Lieske Part No.: 139860