Labeling, marking in Isolation / Identification

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 525937

The thermal transfer printing provides a very detailed picture of graphics, special characters or bar codes. With the Helatag® labels offer the choice for smear-resistant, ultraviolet-resistant and chemical-resistant marking. Type: TAG108TD1-1213-YE 1213 YE 1 RO item: 1 ST.
Sales unit: 2 pieces
Lieske Part No.: 152480

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Lieske Part No.: 525941

For a very clear and permanent identification of storage facilities such as storage aisles and professional levels with barcode and technical information with appropriate signal effect, the solid-colored vinyl material offers. It can thus be generated in production halls and individual warnings and warning signs and position markings of production equipment and other facilities. The material is flexible and can also be mounted on rough surfaces such as welds easily. This material is supplied as a continuous product and can after printing are cut to length either automatically with the cutter or by hand. For production of labels, we recommend our TT420 + printers and TT4000 + and label software Tagprint Pro. Quantity: 1 ST.
Lieske Part No.: 525942

For a very clear and permanent marking of storage systems such as warehouse aisles and shelf levels with barcode and multiple entries with corresponding signal effect, the solid colored vinyl material offers. It can thus be produced in factories and individual warnings and warning labels and position markings of production machinery and other facilities. The material is flexible and can be mounted on rough surfaces such as welds problems. This material is supplied as a continuous product and after printing are cut to length, either automatically with the cutter or by hand. For problem-free printing, we recommend our TT420 + printers and TT4000 + and label software Tagprint Pro. Type: TAGR1TD-1213-GN 1213 GN 1 RO item: 1 ST.
Lieske Part No.: 718679

Type: TAGR1TD-1213-WH 1213 WH 1 RO
Sales unit: 1 pc
Lieske Part No.: 921098

Lieske Part No.: 784448

Lieske Part No.: 770115

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 992613

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 2 pieces
Lieske Part No.: 1588173

Suitable for pipe, line and warehouse labelling. Supplied on a roll as continuous goods. Automatic cutting after printing with a cutting knife or by hand is possible. Also for rough surfaces. Good resistance for outdoor applications. These labels are used to label storage facilities such as storage aisles and shelf levels with barcodes and shelf information. They are also suitable for the individual production of warning notices and warning signs, for the position labelling of production machines and other equipment in production halls and for the labelling of containers, load carriers and barrels.
Sales unit: 100 meters
Lieske Part No.: 2115642

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1335872

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1129276

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 1335871

Sales unit: 1 MTR
Sales unit: 2 pieces
Lieske Part No.: 615695

Dimensions suitable for IT series marking ties and IT/IMP plates. Also suitable for permanent labeling of components and devices on a wide variety of surfaces. Suitable for curved surfaces. White labels for excellent contrast of the print image. The labels are specially tailored to the sizes of the IT marking ties series and IT/IMP plates. The flexible material enables a particularly strong adhesive force on the plates or cable ties. The best printing results are achieved with the HellermannTyton thermal transfer printers. This solution enables professional labeling of hoses, pipes, cables and other components.
Sales unit: 2 pieces
Lieske Part No.: 125103

Sales Unit: 1 ST.
Sales unit: 4 pieces
Lieske Part No.: 286232

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 577008

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 577009

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 6 pieces
Lieske Part No.: 1323896

These labels are particularly suitable for permanent identification on flat surfaces for production equipment or IT devices. The range includes a wide range of label sizes. Unique identification is given by digital printing with serial numbers or barcodes.
Type: TAG31TD3-1206 1206 WH 1 RO
Sales Unit: 1 ST.
Lieske Part No.: 133047

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Sales unit: 4 pieces
Lieske Part No.: 2111393

Sales Unit: 1 ST.
Lieske Part No.: 299483

Sales Unit: 1 ST.
Lieske Part No.: 476290

With its white label and the transparent protective laminate label is ideal for marking cables and wires. The material is pliable and allows even the identification of ribbon cables inside. The protective laminate is placed over the label area and protects it effectively from external influences such as moisture, dirt and mechanical abrasion. The label solution contributes to minimal and does not affect any neighboring markings or veins. For easy printing of labels, we recommend labeling software Tagprint Pro, and our thermal transfer printing systems TT4 and TT42 + +. Type: TAG22TD3-323-WHCL item: 25 ST.
Sales unit: 2500 pieces
Lieske Part No.: 854783

Type: TAG23TD5-323-WHCL
Sales unit: 5000 pc
Sales unit: 5000 pieces
Lieske Part No.: 883449

Type: TAG24TD1-323-WHCL
Sales unit: 1000 pc
Sales unit: 1000 pieces
Lieske Part No.: 130339

Type: TAG25TD3-320-WHCL 320 2500 ST
Sales unit: 2500 pc
Sales unit: 2500 pieces
Lieske Part No.: 813929

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 1323895

Replace complex aluminum signs. For flat and smooth surfaces. Also for critical surfaces such as plastics and paints. Ideal for labeling in areas with high temperatures. Can be printed with text, graphics and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 525963

With his white writing area and the transparent protective laminate label is ideally suited for labeling cables and wires. The material is pliable and allows even the labeling of ribbon cables indoors. The protective laminate is applied over the label area and protects these efficiently against external influences such as moisture, dirt and mechanical abrasion. The label solution contributes to minimal and does not affect adjacent markings or wires. For trouble-free printing of labels, we recommend labeling software Tagprint Pro and our thermal transfer printing systems TT420 + and TT4000 +.
Type: TAG3TD3-1209-WHCL 1209 WH, CL 1 RO
Sales Unit: 1 ST.
Lieske Part No.: 600026

With its white label and the transparent protective laminate label is ideal for marking cables and wires. The material is pliable and allows even the identification of ribbon cables inside. The protective laminate is placed over the label area and protects it effectively from external influences such as moisture, dirt and mechanical abrasion. The label solution contributes to minimal and does not affect any neighboring markings or veins. For easy printing of labels, we recommend labeling software Tagprint Pro, and our thermal transfer printing system TT4000 + and TT420 +. Type: TAG36TD7-323-WHCL item: 10000 ST.
Sales unit: 10000 pieces
Lieske Part No.: 225391

Extremely temperature-resistant. Ideal as a protective laminate or for no-label-look labels. The protective laminate should overlap the underlying label. UV and weather-resistant - five years in a normal Central European climate. Offers additional protection against chemicals for the underlying label. Protective laminates are used primarily for additional protection of printed nameplate labels, for example in the automotive sector and other outdoor systems. The protective laminates are also used when the outline of a label should not be visible, for example on glass surfaces or backlit objects (no-label look).
Sales unit: 5000 pieces
Lieske Part No.: 609978

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 1259964

For labeling control cabinets. Adhesive also suitable for some critical surfaces. Good legibility thanks to high-contrast print image. Rounded corners guarantee better final adhesion. These labels are suitable for the permanent labeling and identification of components and cables in the electrical industry as well as for labeling systems. They are also ideal for use when setting up and installing, but also when repairing and expanding control cabinets and control units. Due to the material combination, they can be used on rougher surfaces. We recommend our printing systems, ink ribbons and label software for easy printing of the labels.
Lieske Part No.: 1706510

Quantity: 5000 ST.
Sales unit: 5000 pieces
Lieske Part No.: 283737

Extremely temperature-resistant. Ideal as a protective laminate or for no-label-look labels. The protective laminate should overlap the underlying label. UV and weather-resistant - five years in a normal Central European climate. Offers additional protection against chemicals for the underlying label. Protective laminates are used primarily for additional protection of printed nameplate labels, for example in the automotive sector and other outdoor systems. The protective laminates are also used when the outline of a label should not be visible, for example on glass surfaces or backlit objects (no-label look).
Sales unit: 2000 pieces
Lieske Part No.: 609998

Transparent protective laminate labels apply when a label extra protection from especially aggressive chemicals, high temperatures or UV light needed. The polyester material
2 7 is ideal for standard applications indoors and outdoors, and also offers high temperature stability. The PVF material 32
distinguished, however, by a very high chemical resistance and very high protection from UV rays. The protective laminates also apply where the outline of a labeled label as to glass surfaces or backlit objects should not be visible (no label look). Type: TAG255
TL
CL-323 Quantity:
ST.
Sales unit: 1000 pieces
Lieske Part No.: 701917

Sales Unit: 1 ST.
Sales unit: 5 pieces
Lieske Part No.: 300297

Extremely temperature-resistant. Ideal as a protective laminate or for no-label-look labels. The protective laminate should overlap the underlying label. UV and weather-resistant - five years in a normal Central European climate. Offers additional protection against chemicals for the underlying label. Protective laminates are used primarily for additional protection of printed nameplate labels, for example in the automotive sector and other outdoor systems. The protective laminates are also used when the outline of a label should not be visible, for example on glass surfaces or backlit objects (no-label look).
Sales unit: 1000 pieces
Lieske Part No.: 610017

Lieske Part No.: 480330

Sales Unit: 1 ST.
Lieske Part No.: 608805

Ideal for labeling in areas with high temperatures (up to +150 °C). For use on flat and smooth surfaces. Chemical-resistant polyester film. For permanent and age-resistant labeling. High-quality material for razor-sharp text and barcodes. The labels are particularly suitable for the production of individual, smudge- and scratch-resistant nameplates for industrial applications. Thanks to their high temperature resistance, they offer a wide range of possible uses on flat surfaces, such as for device, inventory and logistics labeling of stressed load carriers. The adhesive used can also be used on critical surfaces. For problem-free printing of the labels, we recommend our printing systems and the TagPrint Pro label software.
Lieske Part No.: 1323894

Type: TAG73TD1-1203-SR
Sales unit: 1 pc
Lieske Part No.: 279906

Sales Unit: 1 ST.
Lieske Part No.: 927278

Type: TAG76TD1-1203-SR
Sales unit: 1 pc
Sales unit: 4 pieces
Lieske Part No.: 538737

Combination of type plate label and protective laminate, 2 parts. Supplied on a roll. Developed for sophisticated labeling solutions, especially in the automotive sector. Tamper-proof, if attempted to be removed, a checkerboard pattern is left behind. Very suitable for outdoor applications. UV and weather resistant. Meets the requirements of the KBA (Federal Motor Transport Authority). Particularly suitable as a type plate for vehicles. These labels are preferred in the automotive sector and in the electrical industry for the permanent, tamper-proof attachment of type plates. The label solution is particularly recommended for labeling flat surfaces on the vehicle frame as a replacement for conventional aluminum plates. The transparent overlaminate guarantees good resistance to dirt and abrasion and is easy and safe to apply manually.
Sales unit: 1000 pieces
Lieske Part No.: 2092813

Combination of type plate label and protective laminate, 2 parts. Supplied on a roll. Developed for sophisticated labeling solutions, especially in the automotive sector. Tamper-proof, if attempted to be removed, a checkerboard pattern is left behind. Very suitable for outdoor applications. UV and weather resistant. Meets the requirements of the KBA (Federal Motor Transport Authority). Particularly suitable as a type plate for vehicles. These labels are preferred in the automotive sector and in the electrical industry for the permanent, tamper-proof attachment of type plates. The label solution is particularly recommended for labeling flat surfaces on the vehicle frame as a replacement for conventional aluminum plates. The transparent overlaminate guarantees good resistance to dirt and abrasion and is easy and safe to apply manually.
Sales unit: 250 pieces
Lieske Part No.: 2092814

Sales Unit: 1 ST.
Lieske Part No.: 300308

Sales Unit: 1 ST.
Lieske Part No.: 283691