Wall Plugs in Fixing hardware

Screw anchor for direct installation without dowels in concrete and masonry. With small countersunk head for attaching cable clamps through the threaded base.
Load-bearing capacity under fire load proven up to fire resistance class R120.
Sales unit: 200 pieces
Lieske Part No.: 136495

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 50 pieces
Lieske Part No.: 368619

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 50 pieces
Lieske Part No.: 570959

Bolt anchor BZ for anchoring medium to heavy loads indoors and outdoors, in both cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 50 pieces
Lieske Part No.: 332812

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 105122

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 468865

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 105141

Bolt anchor BZ for anchoring medium to heavy loads indoors and outdoors, in both cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 332818

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 1351581

Bolt anchor BZ for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 105212

The NK nail anchor can be used for multiple fastenings of non-load-bearing systems in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 100 pieces
Lieske Part No.: 628956

The nail anchor N can be used for multiple fastenings of non-load-bearing systems in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 100 pieces
Lieske Part No.: 368604

The nail anchor N can be used for multiple fastenings of non-load-bearing systems in areas with highly corrosive influences in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 50 pieces
Lieske Part No.: 346790

Bolt anchor BZ with reduced anchoring depth for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 100 pieces
Lieske Part No.: 468761

Bolt anchor BZ with reduced anchoring depth for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 50 pieces
Lieske Part No.: 1052390

Bolt anchor BZ with reduced anchoring depth for anchoring medium to heavy loads, both in cracked and non-cracked concrete. It combines high permissible loads with small edge and axis distances.
Sales unit: 25 pieces
Lieske Part No.: 1052391

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069878

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069879

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069880

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069881

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069882

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069883

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069884

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069885

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069709

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069710

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069711

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069712

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069713

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 20 pieces
Lieske Part No.: 2069714

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069715

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069716

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069886

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069887

Bolzenanker BZ3 zur Verankerung mittelschwerer bis schwerer Lasten in gerissenem oder ungerissenem Beton. Geeignet für hohe Lasten mit geringen Rand- und Achsenabständen. Zum Einschlagen.
Europäisch Technische Bewertung ETA-19/0619, inklusive charakteristischer Werte unter Brandeinwirkung bis Feuerwiderstandsdauer R 120.
Nachweis der Eignung bei seismischen Einwirkungen, Kategorien C1 und C2.
Schockzulassung des Bundesamtes für Bevölkerungsschutz, Bern, Schweiz. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 843575

Easy hollow ceiling anchor for installation in prestressed concrete hollow ceiling slabs. When the screw or nut is tightened, the cone is released from the anchor sleeve and pulled into it. This causes the dowel to expand in the cavity and creates a positive connection. The hollow ceiling anchor can also be used if the expansion area is not in a hollow chamber.
The component can be attached using commercially available screws and threaded rods.
Sales unit: 25 pieces
Lieske Part No.: 619753

Verkaufseinheit: 4 ST.
Sales unit: 4 pieces
Lieske Part No.: 683485

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022255

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022271

Sales unit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 2022474

Der RED Schlag-/Nageldübel ist eine perfekte Kombination aus Funktionalität und einer sehr guten Qualität. Durch die präzise Führung des Nagels kann man den Schlag-/Nageldübel einfach einschlagen. Der Dübel ist aus Nylon und somit reißfest sowie hitze- und kältebeständig.

Der verzinkte Nagel sichert eine hohe Korrosionsbeständigkeit. Der Schlag-/Nageldübel besitzt einen schlaggeschützten Kreuzschlitz und schützt somit vor einer Beschädigung des Antriebs. Die Einschlagsicherung verhindert ein vorzeitiges Spreizen.

Technische Daten
. Material Dübel/Nagel: Polyamid PA 6/Stahl, die Oberfläche des Nagels ist galvanisch verzinkt
. Zugfestigkeit: 500-700 N/mm2
. Halogenfrei Verkaufseinheit: 200 ST.
Sales unit: 200 pieces
Lieske Part No.: 1246487

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022476

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 100 pieces
Lieske Part No.: 2022477

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022478

The plasterboard impact anchor is suitable for mounting all common plasterboards. No special tools are required for this anchor, simply hammer it in horizontally. When screwed in, the anchor expands and provides a secure hold. Screws are not included. The material is steel.
Sales unit: 100 pieces
Lieske Part No.: 2022481

The plasterboard dowel is suitable for mounting all common plasterboards. The dowel can be easily screwed in using a screwdriver without pre-drilling. The thread is self-tapping. The dowel is suitable for screws with a diameter of 4-5 mm. Screws are not included.
Sales unit: 100 pieces
Lieske Part No.: 2022482

The practical RED BOXX Mini impact/nail/screw dowel is very versatile. The included dividers can be used individually and are flush with the lid.
In this version, you get the RED BOXX Mini with 50 each of RED plasterboard dowels BFM GKSD L and BFM GKSD as well as the RED impact/nail/screw dowel BFM SNSD.
With the RED BOXX Mini, also available as an empty version, you can also practically store your own small materials and pre-sort them perfectly for you. The transparent lid lets you see at a glance what you are storing in the RED BOXX Mini.
Another advantage of the RED BOXX Mini is that you can cleverly stack them on top of each other and connect them to each other using the intelligent click system. This turns a RED BOXX Mini into a whole system.
Contents
: 50 plasterboard impact dowels BFM GKSD L 12x30 mm
. 50 pieces of plasterboard dowels BFM GKSD 12.5x31 mm
. 50 pieces of impact/nail/screw dowels BFM SNSD 6x40 mm
Lieske Part No.: 2022484

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444386
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M6
Length: 35 mm
Weight/pack: 0.06 kg
Lieske Part No.: 471918

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444379
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M8
Length: 35 mm
Weight/pack: 0.11 kg
Lieske Part No.: 506282

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Washers
Packs of: 8 pc(s).
EAN: 4028177606968
Customs tariff number: 73181900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M10
Length: 35 mm
Weight/pack: 0.26 kg
Lieske Part No.: 865530