Wall Plugs in Fixing hardware

Serrated lock washer according to DIN 6798, form A.
Sales unit: 100 pieces
Lieske Part No.: 1327594

Serrated lock washer according to DIN 6798, form A.
Sales unit: 100 pieces
Lieske Part No.: 1674250

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 313403

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 790846

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 501766

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 276755

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 626760

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 416024

Continuous internal thread.
Sales unit: 100 pieces
Lieske Part No.: 295351

Folding spring dowel 45 / M ..: threaded rod, washer and hex nut, brass axis G steel, galvanized finish: M 4/95 Type 45 / M4 Quantity: 5 PCS.
Sales unit: 50 pieces
Lieske Part No.: 947967

With threaded rod and brass slotted nut, brass axle.
Sales unit: 50 pieces
Lieske Part No.: 458530

Folding spring dowel
452 / M ..: with ceiling hook, washer and
Hex nut, brass axle
G steel, galvanized
Model: M 4/70

Type: 452/M4
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 209787

Kippdübeldeckenhaken toggle bolt toggle bolt and threaded shank for mounting lights, etc. on hollow cavity walls and ceilings. galvanized with 2 washers and 2 hex nuts length
mm Model: M 6 breaking load:
3 N Hole diameter:
6 mm Type: 453 M6 Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 887328

Gravity toggle
as before, but with ceiling hook material: steel
galvanized
Model: M 6
Length: 100 mm
Breaking load: 800 N
Hole diameter: 16 mm

Type: 454
Quantity: 1 unit.
VE25 piece
Sales unit: 25 pieces
Lieske Part No.: 163525

Toggle dowel
as before, but with ceiling hook Material: steel,
galvanized
Version: M 5
Length: 65 mm
Breaking load: 400 N
Drill hole diameter: 13 mm
Sales unit: 50 pieces
Lieske Part No.: 886873

Toggle bolts as above, but with ceiling hook material: steel, galvanized finish: M 5 Length:
mm Breaking load: 4 N Hole diameter:
6 mm Type: 455 /
M5 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 510747

2 washers and 2 hexagon nuts, with threaded shaft.
Sales unit: 50 pieces
Lieske Part No.: 934524

1 washer and 1 hexagon nut, with ceiling hook.
Attention: A safety factor of 5 must be taken into account for light suspensions.
Sales unit: 50 pieces
Lieske Part No.: 185054

Includes nut and large washer.
The universal heavy-duty fastening for prestressed concrete, hollow steel profiles, sheets and panels.
Use: heating, ventilation and air conditioning technology, cooling systems, sprinkler systems, pipes,
cable trays, etc.
* Depending on the thickness of the ceiling profile.
Sales unit: 25 pieces
Lieske Part No.: 282112

Areas of application: solid brick, concrete, wood. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 171606

Areas of application: solid brick, concrete, wood. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 594084

Areas of application: solid brick, concrete, wood. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 335869

For attaching components to plasterboard or fiber composite panels.
Minimum panel thickness: 12 mm
for Ø 4.5 mm Golden Sprint or Sprint screws.
Sales unit: 100 pieces
Lieske Part No.: 756514

For attaching components to plasterboard or fiber composite panels.
Min. panel thickness: 5 mm
Sales unit: 100 pieces
Lieske Part No.: 195764

Areas of application: aerated concrete, lightweight concrete, Poroton, pumice, gypsum, perforated bricks and solid bricks. Can be driven into low-strength aerated concrete (aerated concrete) without drilling. Excellent for areas exposed to high temperatures.
Sales unit: 200 pieces
Lieske Part No.: 760252

Areas of application: aerated concrete, lightweight concrete, Poroton, pumice, gypsum, perforated bricks and solid bricks. Can be driven into low-strength aerated concrete (aerated concrete) without drilling. Excellent for areas exposed to high temperatures.
Sales unit: 100 pieces
Lieske Part No.: 953525

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469534

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 1055064

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 469536

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469540

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 100 pieces
Lieske Part No.: 1055065

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 1055066

Drop-in anchor for single fastening of non-load-bearing systems in non-cracked concrete and for multiple fastening in cracked and non-cracked concrete.
Fire protection tested, fire resistance class R 120 according to European Technical Approval ETA-02/0020 (Opt. 7) and European Technical Approval ETA-05/0116.
Installation with marking and spreading tool.
Sales unit: 50 pieces
Lieske Part No.: 469542

Type: FZEA II 10X40 G
Sales unit: 100 pc
Lieske Part No.: 679369

Fire protection tested and approved steel expansion anchor for use in aerated concrete.
Sales unit: 25 pieces
Lieske Part No.: 1055067

Fire protection tested and approved steel expansion anchor for use in aerated concrete.
Sales unit: 25 pieces
Lieske Part No.: 469544

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044251

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Lieske Part No.: 1350014

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 104426

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044260

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 2014089

The anchor rod and matching plastic perforated sleeve are used in conjunction with the VMU plus injection mortar to attach loads to masonry walls without any expansion pressure. The system is also used for fastening in concrete ceilings. On walls made of concrete and solid brick, the anchor rod is only mounted with the VMU plus injection mortar, without a perforated sleeve.
Sales unit: 10 pieces
Lieske Part No.: 1044261

Mit der Ankerstange und dazu passender Kunststoff-Siebhülse werden Lasten, in Verbindung mit dem Injektionsmörtel VMU plus, spreizdruckfrei an Wänden aus Mauerwerk befestigt. Das System wird auch zur Befestigung in Decken aus Beton angewendet. An Wänden aus Beton und Vollstein wird die Ankerstange nur mit dem Injektionsmörtel VMU plus montiert, ohne Siebhülse. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 2144648

With the internally threaded sleeve and matching plastic sieve sleeve, loads are attached to walls and ceilings made of concrete and masonry without expansion pressure in conjunction with the injection mortar VMU plus.
Sales unit: 10 pieces
Lieske Part No.: 469002

With the internally threaded sleeve and matching plastic sieve sleeve, loads are attached to walls and ceilings made of concrete and masonry without expansion pressure in conjunction with the injection mortar VMU plus.
Sales unit: 10 pieces
Lieske Part No.: 469005

With the internally threaded sleeve and matching plastic sieve sleeve, loads are attached to walls and ceilings made of concrete and masonry without expansion pressure in conjunction with the injection mortar VMU plus.
Sales unit: 10 pieces
Lieske Part No.: 1350013

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1044262

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Lieske Part No.: 1044263

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 1350012

The plastic sieve sleeve is a supplement to the anchor rod or internally threaded sleeve and is used for mounting components on masonry.
Sales unit: 10 pieces
Lieske Part No.: 2014090