U-sliding nut, for C-anchor channels model 2975 and 2980, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 28.9 x 20 mm Height of the sliding nut: 10 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 1426323

U-sliding nut, special design, for fastening to C-anchor rails model 2975 and 2980 with slot width 16 mm, GUE... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26.5 x 19 mm Height of the sliding nut: 10 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 1426300

NIEDAX - Make: GUF 204
. slide nut, with plastic spring clamp for C-series rail model 2910, slide nut is only from profile end use, self-adhesive, captive, galvanized according to DIN 50961, passivated Dimensions L x W: 16 x 14 mm with thread M 4 NIEDAX model no. GUF 204 Type: GUF204








Quantity: 1 unit.
Lieske Part No.: 655570

Sliding nut, with plastic clamping spring, for C-series rail model 2910, sliding nut can only be used from the end of the profile, self-adhesive, captive, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 16 x 14 mm with thread: M 5
Lieske Part No.: 744269

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head width: 14 mm Head height: 10.5 mm Thread: M 10 Length L: 20 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 125091

NIEDAX - Make: HK 5
/ 3 hook head screw M
with hexagon nut and washer, anchor channels for C-Model 2985, 2986, 2988 and 299 with
8 mm slot width, galvanized to DIN ISO 4 42, blue passivated. L Length: 3 mm Strength class: 4.6 NIEDAX model no. 5 HK
/ 3 Type: HK5
/ 3 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 925835

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2986/... E3/E5 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head width: 14 mm Head height: 10.5 mm Thread: M 10 Length L: 30 mm Strength class: 1.4571 Material: stainless steel, material no. 1.4571
Sales unit: 100 pieces
Lieske Part No.: 480568

NIEDAX - Make: HK 510/40
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2985, 2986, 2988 and 2990 with 18 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 40 mm



Strength class: 4.6

NIEDAX model no. HK 510/40 Type: HK510/40


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 626654

NIEDAX - Make: HK 510/50
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2985, 2986, 2988 and 2990 with 18 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 50 mm



Strength class: 4.6

NIEDAX model no. HK 510/50 Type: HK510/50


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 407432

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rails 2986/... E3/E5 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head width: 14 mm Head height: 10.5 mm Thread: M 10 Length L: 50 mm Strength class: 1.4571 Material: stainless steel, material no. 1.4571
Sales unit: 50 pieces
Lieske Part No.: 870573

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head width: 14 mm Head height: 10.5 mm Thread: M 10 Length L: 50 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 170384

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 35 mm Head width: 14 mm Head height: 10.5 mm Thread: M 10 Length L: 80 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 1318746

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 34 mm Head width: 14 mm Head height: 10.5 mm Thread: M 12 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 768682

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 34 mm Head width: 14 mm Head height: 10.5 mm Thread: M 12 Length L: 30 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 100 pieces
Lieske Part No.: 532845

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 34 mm Head width: 14 mm Head height: 10.5 mm Thread: M 12 Length L: 50 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 198974

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2985, 2986, 2988, 2990 with 18 mm slot width Dimensions (approx. dimensions) Head length: 34 mm Head width: 14 mm Head height: 10.5 mm Thread: M 12 Length L: 80 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 467247

NIEDAX - Make: HK 610/30
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2987, 2991, 2994, 2995 and 2996 with 22 mm or 26 mm slot width, galvanized according to DIN ISO 4042, blue passivated. length L : 30 mm



Strength class: 4.6

NIEDAX model no. HK 610/30 Type: HK610/30


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 464389

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44 mm Head width: 13 mm Head height: 12 mm Thread: M 10 Length L: 30 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 100 pieces
Lieske Part No.: 263293

NIEDAX - Make: HK 610/40
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2987, 2991, 2994, 2995 and 2996 with 22 mm or 26 mm slot width, galvanized according to DIN ISO 4042, blue passivated. length L : 40 mm Strength class: 4.6 NIEDAX model no. HK 610/40 Type: HK610/40








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 146229

NIEDAX - Make: HK 6
/ 5 T-head bolt M
with hexagon nut and washer, anchor channels for C-Model 2987, 299
, 2994, 2995 and 2996 with 22 mm or 26 mm slot width, galvanized 4 42, blue passivated according to DIN ISO. L Length: 5 mm Strength class: 4.6 NIEDAX model no. 6 HK
/ 5 Type: HK6
/ 5 Quantity: 5 PCS.
Sales unit: 50 pieces
Lieske Part No.: 976696

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44 mm Head width: 13 mm Head height: 12 mm Thread: M 10 Length L: 80 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 302090

NIEDAX - Make: HK 610/80 F
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2987, 2991, 2994, 2995 and 2996 with 22 mm or 26 mm slot width, dip galvanized to DIN EN ISO 1461. length L: 80 mm



Strength class: 4.6

NIEDAX model no. HK 610/80 R Type: HK610/80F


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 628574

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 326264

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 30 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 100 pieces
Lieske Part No.: 151199

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 40 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 509123

NIEDAX - Make: HK 612/50
T-head bolt M 12 with hexagon nut and washer, for C-anchor rails model 2987, 2991, 2994, 2995 and 2996 with 22 mm or 26 mm slot width, galvanized Accor ding to DIN ISO 4042 , blue passivated. L length: 50 mm



Strength class: 4.6

NIEDAX HK model no 612/50 Type: HK612/50


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 588789

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 50 mm Strength class: 4.6 Material: steel, hot-dip galvanized according to DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 1318745

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 80 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 532854

Hook head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor rail 2987 with 26 mm slot width and anchor rails 2991, 2992, 2994, 2995 with 22 mm slot width Dimensions (approx. dimensions) Head length: 44.4 mm Head width: 13 mm Head height: 12 mm Thread: M 12 Length L: 80 mm Strength class: 4.6 Material: steel, hot-dip galvanized in accordance with DIN EN ISO 10684
Sales unit: 50 pieces
Lieske Part No.: 132248

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: Anchor rail 2920 with 11 mm slot width Dimensions (approx. dimensions) Head length: 20 mm Head width: 10.5 mm Head height: 4 mm Thread: M 6 Length L: 20 mm Strength class: 4.6 Material: Steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 1426289

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 27 mm Head width: 13 mm Head height: 4 mm Thread: M 6 Length L: 20 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Lieske Part No.: 803351

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 27 mm Head width: 13 mm Head height: 4 mm Thread: M 6 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 532835

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 27 mm Head width: 13 mm Head height: 4 mm Thread: M 6 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 318850

NIEDAX - Make: HM 3 8/2 Hammer-head bolt M 8 with hexagon nut and washer, for C-series rail Model 29
3 and C-29 anchor channel model
4 with

mm slot width, and C-29 anchor rails model
6 and 29
7 with
2 mm slot width, galvanized to DIN ISO 4 42, blue passivated. Length L: 2 mm NIEDAX model no. Carbide 3 8/2 Type: HM3 8/2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 989974

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 4 mm Thread: M 8 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 740057

NIEDAX - Make: HM 308/40
T-head bolt M 8 with hexagon nut and washer, for C-series rail model 2913 and model 2914 C-anchor rail with 11 mm slot width and C-anchor rails model 2916 and 2917 with 12 mm slot width, galvanized Accor ding to DIN ISO 4042, blue passivated. lengths: 40 mm model no NIEDAX HM 308/40 Type: HM308/40






Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 230990

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 1426288

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 40 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 755696

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: series rail 2913 and anchor rail 2914 with 11 mm slot width and anchor rails 2916 and 2917 with 12 mm slot width Dimensions (approx. dimensions) Head length: 23 mm Head width: 10.2 mm Head height: 5 mm Thread: M 10 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 318852

NIEDAX - Make: HM 408/20
T-head bolt M 8 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 20 mm NIEDAX Model no. HM 408/20 Type: HM408/20






Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 150415

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 8 Length L: 30 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 332112

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 8 Length L: 40 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 398308

NIEDAX - Make: HM 4
/ 3 hammer head screw M
with hexagon nut and washer, anchor channels for C-Model 297, 297
, 2972, 2975 and 298 with
6 mm slot width, galvanized 4 42, blue passivated according to DIN ISO. L Length: 3 mm NIEDAX model no. HM 4
/ 3 type: HM4
/ 3 Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 880216

NIEDAX - Make: HM 410/40
T-head bolt M 10 with hexagon nut and washer, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width, galvanized according to DIN ISO 4042, blue passivated. lengths: 40 mm NIEDAX Model no. HM 410/40 Type: HM410/40






Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 244950

Hammer head screw with hexagon nut and washer, can be used at any point in the profile. Use for: anchor channels 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Head length: 31 mm Head width: 15.5 mm Head height: 6 mm Thread: M 10 Length L: 50 mm Strength class: 4.6 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Lieske Part No.: 273479

Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschienen 2996Z, 2997Z mit 22 mm Schlitzweite Wandausleger STRUT HKC 96Z/..., Hängestiel und Wandausleger STRUT HKC 96ZD/... Abmessungen (ca. Maße) Kopflänge : 34,5 mm Kopfbreite : 19,5 mm Kopfhöhe : 9 mm Gewinde : M 10 Länge L : 30 mm Festigkeitsklasse : 4.6 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461 Verkaufseinheit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 702358

Hammerkopfschraube, mit Verzahnung, einschließlich Sechskantmutter und Unterlegscheibe nach DIN EN ISO 7093-1, an jeder Stelle im Profil einsetzbar. Verwendung für : Ankerschiene 2996Z mit 22 mm Schlitzweite Wandausleger STRUT HKC 96Z/..., Hängestiel und Wandausleger STRUT HKC 96ZD/... Abmessungen (ca. Maße) Kopflänge : 34,5 mm Kopfbreite : 19,5 mm Kopfhöhe : 11 mm Gewinde : M 12 Länge L : 60 mm Festigkeitsklasse : 4.6 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461 Verkaufseinheit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 702273

Ceiling hook, with NIEDAX steel dowel with pressed-in cone nut, the cone of the steel dowel is captive with anti-twist protection. The dowel has not been approved by the building authorities and can therefore only be used for secondary fastenings. Dimensions (approx. dimensions) Dowel length L: 40 mm Nominal drilling diameter: 10 mm Hook diameter inside: 16 mm Hook screw: M 5X42 Material: Steel, galvanized according to DIN EN ISO 2081 or DIN ISO 4042, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 460375

Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn. Bewertung: Zulassungs.Nr. ETA-19/0553. Zur Verwendung im Funktionserhalt bitte Zusatzvorschriften beachten! Gew.-Aussen-Ø : 10 mm Länge : 100 mm Gewindelänge : 93 mm Torxantrieb : T40 Kopf-Ø : 22,5 mm Empf. Anzugsmoment : 9,5 Nm Bohrungs-Ø Nadelholz : 6,0 mm Bohrungs-Ø Buche, Eiche, Esche : 7,0 mm Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Verkaufseinheit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 705776

Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn. Bewertung: Zulassungs.Nr. ETA-19/0553. Zur Verwendung im Funktionserhalt bitte Zusatzvorschriften beachten! Gew.-Aussen-Ø : 10 mm Länge : 140 mm Gewindelänge : 84 mm Torxantrieb : T40 Kopf-Ø : 22,5 mm Empf. Anzugsmoment : 9,5 Nm Bohrungs-Ø Nadelholz : 6,0 mm Bohrungs-Ø Buche, Eiche, Esche : 7,0 mm Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Verkaufseinheit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 705777