The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Fast and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and holds it there securely. The design reliably protects the cable from damage from sharp sheet metal edges. When tightened by hand, the fastener is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Sales unit: 10 pieces
Lieske Part No.: 1769433

The locking mechanism, which can be operated without tools by pushing or pulling, allows for very simple adjustment. The small lock is almost invisible. The rope angle enclosed by the loop can be up to 90 degrees, which means the lock can be positioned very close to the load. The tubes of the locking mechanism can be operated easily and safely even when wearing gloves. The double-sided locking mechanisms allow for easy height adjustment.
Sales unit: 10 pieces
Lieske Part No.: 2068702

The assembly kit includes fused wire rope cuts that cannot fray, pre-assembled hook end pieces and a time-saving tool-free lock. The wire rope loops can be attached to the structure and hooked into place. The hook end pieces are easy to attach to the ring nut. The spring tab holds the rope securely in the hook.
Lieske Part No.: 2131245

Zum Montagesatz gehören verschmolzene Drahtseilzuschnitte, die nicht ausfransen können, vormontierte Hakenendstücke und ein zeitsparendes werkzeugloses Schloss.. Die Drahtseilschlaufen können am Bauwerk befestigt und eingehakt werden. Die Hakenendstücke sind leicht an der Ringmutter anzubringen. Die Federlasche hält das Seil sicher im Haken.
Lieske Part No.: 702228

Zum Montagesatz gehören verschmolzene Drahtseilzuschnitte, die nicht ausfransen können, vormontierte Hakenendstücke und ein zeitsparendes werkzeugloses Schloss.. Die Drahtseilschlaufen können am Bauwerk befestigt und eingehakt werden. Die Hakenendstücke sind leicht an der Ringmutter anzubringen. Die Federlasche hält das Seil sicher im Haken.
Lieske Part No.: 702230

The locking mechanism, which can be operated without tools by pushing or pulling, allows for very simple adjustment. The small lock is almost invisible. The 60° angle allows the device to be positioned close to the structure. The tubes of the locking mechanism can be operated easily and safely even when wearing gloves.
Lieske Part No.: 2131246

Used as a conductor or earthing in lightning protection systems. Lower impedance than similarly sized round conductors.
Lieske Part No.: 1320459

The complete system includes a steel cable, lock and mounting bracket with push bolt adapter. Attaches to the muzzle of gas or battery-powered bolt drivers and can be used without holding or with an extension rod. Mounting bracket with longer legs for tool clearance. Quick and easy to attach to concrete, steel and composite metal ceilings.
Lieske Part No.: 2068703

Fixed cable for a range of applications. Available in smaller spool sizes for better handling. LPA and LPC parts are used as lightning conductors in lightning protection systems or in earthing applications.
Lieske Part No.: 467403

Mounting rail for the manufacture of trapezes, structures and bracing, type CC. 3 meters of back-perforated, pre-galvanized mounting rails, welded on the back, 41 x 41 x 2.5 mm.
Sales unit: 5 pieces
Lieske Part No.: 785477

Cold formed rail, slotted hole. Welded back to back.
Sales unit: 5 pieces
Lieske Part No.: 251302

Cold formed rail, slotted hole. Welded back to back.
Sales unit: 5 pieces
Lieske Part No.: 179844

Cold-formed rail, slotted hole. Welded back-to-back. Mounting rails for heavy loads. For individual fastening or for efficient construction of pipe and cable routing.
Sales unit: 5 pieces
Lieske Part No.: 392063

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, pre-galvanized mounting rails, welded on the back, 82 x 41 x 2.5 mm.
Sales unit: 5 pieces
Lieske Part No.: 328357

Cold-formed rail, slotted hole. Welded back-to-back. Mounting rails for heavy loads. For individual fastening or for efficient construction of pipe and cable routing.
Sales unit: 5 pieces
Lieske Part No.: 936867

ERICO ERISTRUT System
Version: electro galvanized, hot-dip galvanized, stainless steel
profile DC
Dimensions: 21 x 41 x 2.5 mm
Lead Length: 3m Type: DC30-1


Quantity: 1 unit.
Sales unit: 10 pieces
Lieske Part No.: 228599

Mounting rail for the production of trapezes, structures and bracing, type C. 6 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 147716

Mounting rail for the production of trapezes, structures and bracing, type C. 2 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2 mm.
Sales unit: 10 pieces
Lieske Part No.: 1259969

Montageschiene zur Herstellung von Trapezen, Konstruktionen und Verstrebungen, Typ C. 3 Meter rückengelochte, vorverzinkte Montageschiene, 21 x 41 x 2 mm.
Lieske Part No.: 502916

Mounting rail for making trapezes, structures and bracing, type C. 6 meters of back-punched, stainless steel 316 mounting rail, 21 x 41 x 2.5 mm.
Lieske Part No.: 505961

Mounting rail for the production of trapezes, structures and bracing, type C. 3 meters of back-perforated, hot-dip galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 599242

Montageschiene zur Herstellung von Trapezen, Konstruktionen und Verstrebungen, Typ A. 2 Meter rückengelochte, vorverzinkte Montageschiene, 41 x 41 x 2 mm.
Sales unit: 10 pieces
Lieske Part No.: 1279843

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 555111

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 456122

Mounting rail for making trapezes, structures and bracing, type A. 6 meters of back-punched, stainless steel 316 mounting rail, 41 x 41 x 2.5 mm.
Lieske Part No.: 634941

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, hot-dip galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 622066

Cold formed rail, long hole. With side holes.
Sales unit: 10 pieces
Lieske Part No.: 149963

Back-to-back welded rail. Welded to flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 1317379

Back-to-back welded rail. Welded to flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 1317378

Back-to-back welded rail. Welded to flat mounting plate.
Lieske Part No.: 1317377

Ausleger bzw. Konsole für Wandmontage, typ C. Stahl, EG, 2 mm x 150 mm x 41 mm x 21 mm.
Sales unit: 20 pieces
Lieske Part No.: 2069724

Ausleger bzw. Konsole für Wandmontage, typ C. Stahl, EG, 2 mm x 300 mm x 41 mm x 21 mm.
Sales unit: 10 pieces
Lieske Part No.: 2069725

Ausleger bzw. Konsole für Wandmontage, typ C. Stahl, EG, 2 mm x 450 mm x 41 mm x 21 mm.
Sales unit: 5 pieces
Lieske Part No.: 2069726

Bracket or console for wall mounting, type C. Steel, EG, 2.5 mm x 150 mm x 41 mm x 21 mm.
Sales unit: 20 pieces
Lieske Part No.: 780792

Bracket or console for wall mounting, type C. Steel, EG, 2.5 mm x 300 mm x 41 mm x 21 mm.
Sales unit: 10 pieces
Lieske Part No.: 573097

Bracket or console for wall mounting, type C. Steel, EG, 2.5 mm x 450 mm x 41 mm x 21 mm.
Lieske Part No.: 2068200

Welded back to back on flat mounting plate.
Sales unit: 10 pieces
Lieske Part No.: 476662

Ausleger bzw. Konsole für Wandmontage, typ A. Stahl, EG, 2 mm x 200 mm x 41 mm x 41 mm.
Sales unit: 20 pieces
Lieske Part No.: 2069727

Welded back to back on flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 112102

Welded back to back on flat mounting plate.
Lieske Part No.: 604895

Ausleger bzw. Konsole für Wandmontage, typ A. Stahl, EG, 2 mm x 450 mm x 41 mm x 41 mm.
Sales unit: 5 pieces
Lieske Part No.: 2069729

Angles for mounting rails for creating frames and structures.
Lieske Part No.: 373907

Angles for mounting rails for creating frames and structures.
Lieske Part No.: 2068233

Suitable for sloping walls and roofs. Two screws and nuts included.
Lieske Part No.: 629085

Cable tray type. Welded to flat mounting plate.
Sales unit: 20 pieces
Lieske Part No.: 233406

Cable tray type. Welded to flat mounting plate.
Lieske Part No.: 686054

Cable tray type. Welded to flat mounting plate.
Sales unit: 10 pieces
Lieske Part No.: 319813

Cable tray type. Welded to flat mounting plate.
Sales unit: 10 pieces
Lieske Part No.: 788009

Cable tray type. Welded to flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 798240

U-Profil Konsole mit Stütze. Loch/Langloch Ausführung.
Sales unit: 5 pieces
Lieske Part No.: 497334