Fasteners in Fixing hardware

Spring steel cable clip that supports the cable or PVC conduit on or under the support flanges. 8-9mm cable for 2-4mm flange, slide onto the flange for installation.
Sales unit: 100 pieces
Lieske Part No.: 317644

Flange thickness 2-4 mm
Wire size: 10-11 mm Type: 24SC1011


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 242749

Flange thickness 4-7 mm
Wire size: 11-12 mm Type: 47SC1214 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 111265

Flange thickness 2-4 mm
Wire size: 11-12 mm Type: 24SC1214


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 376713

Flange thickness 4-7 mm Conductor cross section:
5 -
8 mm Type: 47Sc
5
8 item:
ST.
Lieske Part No.: 796864

Flange thickness 2-4 mm
Wire size: 15-18 mm

Type: 24SC1518
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 163374

Flange thickness 4-7 mm
Wire size: 19-24 mm Type: 47SC1924


Item: 50 ST.
Lieske Part No.: 254839

Flange thickness 2-4 mm
Wire size: 19-24 mm Type: 24SC1924


Item: 100 ST.
Lieske Part No.: 609284

Flange thickness 4-7 mm
Wire size: 25-32 mm

Type: 47SC2530
Item: 100 ST.
Lieske Part No.: 561623

Flange thickness 2-4 mm
Wire size: 25-32 mm

Type: 24SC2530
Item: 100 ST.
Lieske Part No.: 497463

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 744392

Flange 8 -
2 mm cross section:
-

mm Type: 8
2SC


Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 754782

Flange thickness 8-12 mm
Wire size: 11-12 mm Type: 812SC1214 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 559696

Chest tube clamp
lockable, EPZ
Wire size: 15-18 mm Type: 812SC1518


Item: 100 ST.
Lieske Part No.: 313934

Flange 8 -
2 mm cross section:
9-24 mm Type: 8
2SC
924 sales unit:
ST.
Lieske Part No.: 844494

Chest tube clamp closed, EPZ cross section: 25-32 mm Type: 8
2SC253 item:
ST.
Lieske Part No.: 737614

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 943989

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 698488

For parallel cable routing along the inside of the support flange. Used with the 24SC Series Snap Clips to accommodate thicker flanges. Holds up to three Snap Clips. Requires only a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 228725

Spring steel cable clip adapter that allows the use of two cable clips parallel to each other. Used for 12 to 20 mm flanges.
Lieske Part No.: 519748

Lieske Part No.: 796568

Designed to accommodate an nVent CADDY Speed Link wire rope or hook.
Sales unit: 100 pieces
Lieske Part No.: 859036

Eyelet for the CADDY Speed Link wire hanging system for connection to the building. M8 thread, with an 8.5 mm through hole, compatible with the Speed Link hook end piece.
Sales unit: 100 pieces
Lieske Part No.: 781205

Designed to accommodate an nVent CADDY Speed Link wire rope or hook.
Sales unit: 100 pieces
Lieske Part No.: 961411

Spring steel cable fastener. For attaching electrical cables to nVent CADDY Speed Link steel cables.
Sales unit: 100 pieces
Lieske Part No.: 1261130

Spring steel cable fastener. For attaching electrical cables to nVent CADDY Speed Link steel cables.
Sales unit: 100 pieces
Lieske Part No.: 917750

For use in concrete and stone. Includes screw-in bit for easy installation.
Sales unit: 100 pieces
Lieske Part No.: 1313418

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 799527

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 968829

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is guided through openings.
Sales unit: 2 pieces
Lieske Part No.: 1311231

For mounting in simple through holes in a variety of components or devices. Ideal for lighting fixtures. The Y design increases stability.
Sales unit: 20 pieces
Lieske Part No.: 481536

Wire rope spools that allow installers to customize nVent CADDY Speed Link systems for each project. 300 meter spool with 1.5 mm steel rope.
Lieske Part No.: 1324308

Wire rope spools that allow installers to customize nVent CADDY Speed Link systems for each project. 300 meter spool of 2 mm wire rope.
Lieske Part No.: 1324124

Steel cable spools that allow installers to customize nVent CADDY Speed Link systems for each project. 300 meter spool with 3 mm steel cable.
Lieske Part No.: 1324378

Safe suspension for projectors, routers, etc.
Sales unit: 20 pieces
Lieske Part No.: 1324391

Easy to use stainless steel latch for wire rope suspension systems. Tool operated latch compatible with 1.5 gauge steel rope.
Sales unit: 200 pieces
Lieske Part No.: 926597

The double hook makes it easy to attach cable trays or lighting fixtures. The design allows a hook to be temporarily released to carry out maintenance work or to remove or add cables to a cable tray. The Y-design increases stability. The spring tab holds the rope securely in the hook.
Sales unit: 10 pieces
Lieske Part No.: 1324390

Drum with nVent CADDY Speed Link steel cable. Steel cable made of 7 bundles with 7 strands each consisting of aviation-grade wire.
Lieske Part No.: 1263167

Drum with nVent CADDY Speed Link steel cable. Steel cable made of 7 bundles with 7 strands each consisting of aviation-grade wire.
Lieske Part No.: 347472

Steel cable suspension with ultra-flat locking, ideal for attaching electrical boxes and lights. Hook end on one side, keyless flat M6 thread lock on the other side, 1m length, 1.5mm cable.
Sales unit: 20 pieces
Lieske Part No.: 1324410

The system includes the steel cable with hook and the fastener. Ideal for hanging lighting fixtures, ventilation ducts and other installations. The small fastener is almost invisible. The fastener can be opened without tools and therefore allows for very easy adjustment.
Sales unit: 20 pieces
Lieske Part No.: 1324409

The system includes the steel cable with tilting element and the lock. For fastening in simple through holes in a variety of components or devices. Ideal for lighting fixtures. The small lock is almost invisible. The lock can be opened without tools and therefore allows very easy adjustment.
Sales unit: 20 pieces
Lieske Part No.: 1264258

Steel cable suspension kit consisting of a reel of steel wire and keyless locks. Reel with 150m of 1.5mm steel cable, packed with 100 keyless locks.
Lieske Part No.: 1340398

Steel cable suspension kit consisting of a reel of steel wire and keyless locks. Reel of 50m of 1.5mm steel cable, packed with 25 keyless locks.
Lieske Part No.: 1340399

Consists of nVent CADDY Speed Link SLK spool set with steel cable spools and fasteners and a cable cutter. The cable spool and fasteners are packed together, which simplifies transport to the construction site and reduces inventory. The intelligent packaging allows the user to remove any length of cable without removing the spool from the box. Ideal when individual cable lengths are required. Steel cable made of 7 bundles with 7 strands each consisting of aviation quality wire. The locking mechanism, which can be operated by pushing or pulling without tools, allows very easy adjustment. The small fastener is almost invisible. The cable angle enclosed by the loop can be up to 90 degrees, which means the fastener can be positioned very close to the load. The tubes of the locking mechanism can be operated easily and safely even when wearing gloves. The double-sided locking mechanisms allow easy height adjustment.
Lieske Part No.: 1351592

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 2068323

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 2068324

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Lieske Part No.: 2068325

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 20 pieces
Lieske Part No.: 1325665

Versatile, height adjustable suspension for quick installation on various metal structures. Ceiling hook end piece on one side, keyless locking on the other side, 3m length, 1.5mm cable.
Lieske Part No.: 1325465