Beam intermediate clamps, including hexagon screws with shoulder tip in accordance with DIN 564, for clamping the rail between the legs of a T-beam. The specified load capacity refers to a leg spacing of 400 mm and an applied torque of 2.5 Nm with exclusively vertical load introduction. If larger leg spacings are used, the max. load capacity must be reduced. Please order the rail separately (the length corresponds to the distance between the two flanges) and cut to length on site (minus approx. 16 mm material thickness and screw tip), mount with the two beam intermediate clamps and then position and clamp in the beam. for anchor rail: 2986 2996Z Accessories: 4 x SK 8X25 V Dimensions (approx. dimensions) H x W x L: 15 x 45.5 x 100 mm Material thickness t: 2 mm Load capacity F: 0.5 kN Leg spacing/2 Material intermediate clamp: Steel, strip galvanized according to DIN EN 10346 Material hexagon screw: Steel, electrogalvanized according to DIN EN ISO 4042, blue passivated Niedax model no.: TZK 86-96 S
Lieske Part No.: 273110

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 10 - 21 mm Width B: 47 mm for threaded rod through hole: Ø 14 mm Load capacity F: 1.1 kN Material: steel, hot-dip galvanized
Sales unit: 100 pieces
Lieske Part No.: 1315697

Mounting bracket with 3 holes for cross-shaped connection of profile rails 41 x 21 mm.
Sales unit: 10 pieces
Lieske Part No.: 578502

Mounting bracket with 3 holes for cross-shaped connection of profile rails 41 x 41 mm.
Lieske Part No.: 305674

Mounting bracket with 3 holes for cross-shaped connection of professional rails 41 x 21 mm.
Sales unit: 10 pieces
Lieske Part No.: 580749

Mounting bracket with 3 holes for cross-shaped connection of profile rails 41 x 41 mm.
Sales unit: 10 pieces
Lieske Part No.: 1330390

With through hole.
Max. tightening torque: 8 Nm
Sales unit: 50 pieces
Lieske Part No.: 789822

With thread.
Max. tightening torque: 8 Nm
Sales unit: 50 pieces
Lieske Part No.: 734879

With thread.
Max. tightening torque: 21 Nm
Sales unit: 25 pieces
Lieske Part No.: 795616

For suspending light supports or other components.
Sales unit: 25 meters
Lieske Part No.: 265330

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 2121901

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 1103519

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 2128774

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069894

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069895

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069896

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069897

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069898

Mounting brackets for attaching poles, ladders and structures to walls, ceilings or steel scaffolding.
Sales unit: 10 pieces
Lieske Part No.: 2069899

Mounting brackets for creating individual supporting structures with U-posts.
Lieske Part No.: 1055267

Mounting brackets for creating individual supporting structures with U-posts.
Sales unit: 5 pieces
Lieske Part No.: 1100923

Mounting bracket in lightweight design with side dimensions 64 x 32 mm.
Sales unit: 10 pieces
Lieske Part No.: 664861

Protective cap for the end cover of US 3 stems.
Lieske Part No.: 195684

Spacer for use in trapezoidal profiles type TP.
Sales unit: 10 pieces
Lieske Part No.: 169018

Clamping bracket individually as a spare part for attaching the boom AS 30 or AS 55 to the hanging support IS 8.
Lieske Part No.: 327701

Ecopack 31Wire suspension
Lieske Part No.: 676994

Round 21Seilabhängung Verkaufseinheit: 1 ST.
Lieske Part No.: 842299

LicrossRope suspension
Lieske Part No.: 673127

LicrossRope suspension
Lieske Part No.: 673129