GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319592

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319591

Sales unit: 10 pieces
Lieske Part No.: 334792

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319590

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319603

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 10 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319754

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319742

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 3 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319646

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 4 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319755

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 1 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312901

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 10 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312893

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 3 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312900

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 4 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312899

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 5 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312898

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312908

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 124832

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 213195

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312897

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312896

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312879

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 287477

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 3 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 945591

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 4 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312895

GRIPPLE hooks without dowels with driving aid included per smallest unit (100 hooks), for direct fastening in concrete ceilings and natural stone, for GRIPPLE cable systems. The load-bearing capacity F only applies if the cable is sufficiently anchored to the supporting surface and installed in accordance with the regulations. Dimensions (approx. dimensions) for cable Ø: 1.5 mm and 2 mm Drilling Ø: 8 mm Minimum drilling depth: 30 mm Load-bearing capacity F: 0.45 kN (3-fold safety against breakage depending on the material thickness of the cable system used) Material: stainless steel, material no. 1.4401 (316)
Sales unit: 100 pieces
Lieske Part No.: 1311259

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 10 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1427333

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 4 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1427334

GRIPPLE set loop, quick hanging system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies when installed correctly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Perm. load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: Steel, galvanized.
Sales unit: 10 pieces
Lieske Part No.: 1426472

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1327262

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332692

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1327263

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: stainless steel, material no. 1.4401, 1.4404
Lieske Part No.: 1426473

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 5 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: stainless steel, material no. 1.4401, 1.4404
Sales unit: 10 pieces
Lieske Part No.: 1426474

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 2 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426012

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 3 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426463

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 4 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426440

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 1 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426428

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 10 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427299

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 2 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427300

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 3 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1190060

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 5 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427301

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319704

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319662

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Eyelet Ø: 6.5 mm Permissible load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319666

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319667

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319665

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319664

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319663

GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct installation. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Drill hole Ø: 10 mm Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316144

GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct installation. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 10 m Drill hole Ø: 10 mm Permissible load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316185

GRIPPLE rope sheathing, for GRIPPLE wire ropes made of galvanized steel or stainless steel to protect against condensation when in contact with pipes, to reduce noise on pipes and to minimize friction between metals. Dimensions (approx. dimensions) for rope Ø: 2 mm Length: 25 m Color: black Material: Polyurethane (PUR)
Lieske Part No.: 1316179