Disc 8.4 x 30 x 2.5 DIN 522, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595704

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055128

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055129

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055130

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055131

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055084

Long tray, cable diameter: 12-16 mm, sendzimir galvanized
Lieske Part No.: 1331014

Long tray, cable diameter: 16-20 mm, sendzimir galvanized
Lieske Part No.: 1331013

Long tray, cable diameter: 40-44 mm, sendzimir galvanized
Lieske Part No.: 1331012

Long tray, cable diameter: 44-48 mm, sendzimir galvanized
Lieske Part No.: 1331011

GRIPPLE set cross anchor and express lock, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden beams. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Drill hole Ø: 8 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 467978

Profile clamp including M 8 stud screw with slotted hexagon head and clamping plate, for clamping to support profiles with parallel flanges or with slanted flanges up to a maximum of 14% inclination and as a supply line to the energy consumers. The fastening materials used can vary depending on the application! Dimensions (approx. dimensions) H x W x L: 57 x 40 x 47 mm Threaded connections: M 8 Load capacity specification vertical nominal load F1: 1.8 kN Load capacity specification vertical nominal load F2: 1.6 kN Flange thickness of the support t: 6 - 35 mm Screw tightening torque: 4 Nm Wrench size: SW 13 Material: Stainless steel, material no. 1.4571
Sales unit: 25 pieces
Lieske Part No.: 468457

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460701

E-clips, flange claw with angle hanger, for hammering onto a wide range of support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm for connecting threaded rod: M 8 Distance to flange surface A: 54 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460706

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460711

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26.6 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460712

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460717

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460718

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460720

E-clips, universal flange claw with pipe clip, for hammering onto a wide range of support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 32 - 40 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460721

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 20 - 25 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 50 pieces
Lieske Part No.: 460738

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm Fastening holes: Ø 6.5 mm Hole spacing to flange surface A: 30 mm Load capacity F: 0.9 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315700

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315959

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 3 mm Impact depth B: 12.5 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460714

E-clips, flange claw with angle hanger, for hammering onto various support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm for connecting threaded rod: M 10 Distance to flange surface A: 46 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 629431

E-clips, universal holding claw, for hammering onto a wide range of support flanges, flexible tab for laying and guiding cables and lines. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Impact depth B: 26.6 mm Tab length A: 58 mm Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315956

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 26 - 32 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 733965

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315958

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 539378

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 189718

E-clips, flange claw with connector, for hammering onto a wide range of support flanges, with plastic connector attached to the front for attaching cables and wires, connector halogen-free. Dimensions (approx. dimensions) for cable ties: = width 9 mm x height 3.5 mm for flange thickness T: 8 - 14 mm Flange claw material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 Connector material: PA (polyamide)
Sales unit: 25 pieces
Lieske Part No.: 460733

E-clips, flange claw, for impacting on a wide range of support flanges angled at 90°. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm Impact depth B: 14 mm Connection fastening hole: Ø 6.5 mm center distance to the upper edge of impact angle: 42 mm Additional fastening hole: ¿ 6.5 mm center distance to connection fastening hole: 12 mm Load capacity F: 0.72 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315699

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm for connecting threaded rod: M 6 Distance to flange upper edge A: 70 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 705079

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 6 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 190930

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 8 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 924918

E-clips, steel cable, with 7 strands and 7 wires each, for universal suspension. Dimensions (approx. dimensions) Length L: 30000 mm Rope Ø: 3 mm Wire rope Strands: 7 Wires: 7 Load capacity F: 1.9 kN Material: Steel, hot-dip galvanized
Lieske Part No.: 1315954

Roof tile, concrete tile with hot-dip galvanized anchor rail 2986 and foam rubber pad, for laying cable trays, pipes, rails and cables using U-clamps, sliding nuts and screws, the installation is suitable e.g. on flat roof surfaces or for floor mounting, the foam rubber pad made of rot-proof material serves as a solid support surface and prevents damage to the existing roof covering, for cable tray fastening on the anchor rail sliding nut GMZ M... F please order separately. Please note: The roof-mounted installation must be coordinated with the building owner or specialist planner with regard to the possible additional loads depending on the location. Dimensions (approx. dimensions) Foam rubber pad H x W x L : 10 x 150 x 500 mm Concrete block H x W x L : 110 x 150 x 500 mm Anchor rail H x W x L : 22 x 40 x 500 mm Slot width : 18 mm Pad material : Foam rubber, halogen-free Stone material : Concrete Rail material : Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 1344999

E-clips, universal claw for cable clamps, for striking with a hammer on a wide variety of support flanges and for holding up to three flange cable clamps, for cable and pipe fastening. for flange cable clamp: ECS... Dimensions (approx. dimensions) for flange thickness T: 15 - 20 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 480573

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 304639

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 25 - 32 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460722

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 4 - 7 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 688486

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 270759

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 709088

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 207995

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 414798

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315698

E-clips, flange claw, for hammering onto a wide variety of support flanges. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 EP Material___________ EP Labor__________Unit price/pieceE-clips, flange claw, for hammering onto a wide variety of support flanges. for flange thickness: 8 - 14 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 840668

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 3 - 8 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 886709

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 289611

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 286896