Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm
Sales unit: 100 pieces
Lieske Part No.: 532767

NIEDAX - Make: BUK 38
Universal-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays ( GWU / GWS ...) must be ordered separately. Occupancy: 1 cable for cable diameter: 34 - 38 mm . NIEDAX Model #: BUK 38 Type: BUK38 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 559862

NIEDAX - Make: EAC 38/2
Universal-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width against tanks (GWU / GWS ...) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameter: 34 - 38 mm NIEDAX Model Number: EAC 38/2. Type: BUK38 / 2








Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 672072

NIEDAX - Make: BUK-42 Universal Clamp clip with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels (2985-2996) with
8-22 mm slot width, counter trays (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameters. 38-42 mm NIEDAX Model No.: BUK 42 Type: BUK42 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 783158

NIEDAX - Make: EAC 42/2
Universal-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, against tanks (GWU. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cable



for cable diameters 38 - 42 mm

NIEDAX model no. BUK 42/2 Type: BUK42 / 2


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 318539

NIEDAX - Make: BUK 46
Universal-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays ( GWU ...) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 42 - 46 mm

NIEDAX model no. BUK 46 Type: BUK46


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 657252

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 532788

NIEDAX - Make: BUK 50
Universal-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 46 - 50 mm

NIEDAX model no. BUK 50

Type: BUK50
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 467695

NIEDAX - Make: EAC 50/2
Universal-clamp, with plastic pressure tank made ​​of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width against tanks (GWU. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cable



for cable diameters 46 - 50 mm

NIEDAX model no. BUK 50/2 Type: BUK50 / 2


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 295091

NIEDAX - Make: BUK 54
Universal-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 50 - 54 mm . NIEDAX Model #: BUK 54 Type: BUK54




Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 310638

NIEDAX - Make: BUK 58
Universal-clamp, with plastic pressure tank made of PP, halogen-free, bath mat galvanized to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, suitable for NIEDAX anchor channels (2985-2996) with 18-22 mm slot width, counter trays (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 54 - 58 mm

NIEDAX model no. BUK 58

Type: BUK58
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 244393

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 58 - 64 mm
Sales unit: 50 pieces
Lieske Part No.: 843574

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 749449

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 291044

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 76 - 82 mm
Sales unit: 50 pieces
Lieske Part No.: 957348

Universal U-clamp, with plastic pressure tray made of PP, halogen-free, tray insert strip galvanized according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails (2985-2996Z) with 18-22 mm slot width, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 82 - 90 mm
Sales unit: 25 pieces
Lieske Part No.: 152362

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 25 pieces
Lieske Part No.: 1426030

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 6 - 12 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 744276

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 10 - 12 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426321

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 398748

NIEDAX - Make: BW 14 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 10 - 14 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 14 AL Type: BW14AL


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 443431

U-clamp, for angle iron, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, bracket hot-dip galvanized in accordance with DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 16 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 526834

U-clamp for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426322

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 187045

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426312

NIEDAX - Make: BW 18 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 18 AL

Type: BW18AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 595103

NIEDAX - Make: BW 22
Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 18 - 22 mm
angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm NIEDAX Model No.: BW 22nd Type: BW22




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 142561

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 18 - 22 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 426151

NIEDAX - Make: AL BW 22 Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO
2 7, also use to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 22 AL Type: BW22AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 505992

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a maximum leg length of 40 mm, counter trays (GWU/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 22 - 26 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 578658

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426324

NIEDAX - Make: BW 26 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 22 - 26 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 26 AL

Type: BW26AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 363106

NIEDAX - Make: BW 3 Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 26 - 3 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 3 Type: BW3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 707354

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 26 - 30 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 1426311

Bügelschelle, für Winkeleisen, mit Druckwanne und Zapfenschraube M 8 nach DIN EN ISO 1207 mit Mehrfachantrieb, einsetzbar an gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen. Gegenwanne GWU ... bitte gesondert bestellen. Verwendung für : gleich- und ungleichschenkligem Winkelstahl sowie U-Eisen mit einer Schenkellänge von max. 40 mm sowie einer Dicke von 4 - 6 mm Abmessungen (ca. Maße) Belegung : 1 Kabel für Kabel-Ø : 26 - 30 mm Werkstoff Bügel : Aluminium Werkstoff Druckwanne : Aluminium
Sales unit: 100 pieces
Lieske Part No.: 796758

NIEDAX - Make: BW 34
Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN 10346, Ironing dip galvanized to DIN EN ISO 1461, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter trays (GWU / GWS ...) must be ordered separately.

Occupancy: 1 cable

for cable diameters 30 - 34 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 34

Type: BW34
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 490447

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 30 - 34 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426326

NIEDAX - Make: AL BW 34 Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO
2 7, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 3-34 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 34 AL Type: BW34AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 959916

NIEDAX - Make: BW 38 Cable clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU / GWS ...) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 38 Type: BW38 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 718188

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU/GWS...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 34 - 38 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426327

NIEDAX - Make: AL BW 38 Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO
2 7, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm angle iron Dimensions H x W x D: 4 x 4 x 4-6 mm NIEDAX Model No.: BW 38 AL Type: BW38AL item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 548975

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 38 - 42 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 474577

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426328

NIEDAX - Make: AL BW 42 Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO
2 7, also use to ungleichschenkligem steel angle and channel iron with max. a side length of 4 mm, counter sink (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameters 38 - 42 mm angle iron Dimensions H x W x D:. 4 x 4 x 4-6 mm NIEDAX Model No.: BW 42 AL Type: BW42AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 852531

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 100 pieces
Lieske Part No.: 411177

NIEDAX - Make: AL BW 46
Cable clamp for angle iron, made ​​entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately. Occupancy: 1 cable for cable diameter: 42 - 46 mm angle iron dimensions H x W x D: 40 x 40 x 4-6 mm NIEDAX Model No.: BW. 46 AL Type: BW46AL










Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 563053

NIEDAX - Make: BW 5 Strap clamp for angle iron, in galvanized steel pressure tank according to DIN EN
346, Ironing dip galvanized to DIN EN ISO
46
, Also used to ungleichschenkligem angle steel, channel iron with max. a side length of 4 mm, counter trays (GWU. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 46 - 5 mm angle iron Dimensions H x W x D:. 4 x 4 x 4-6 mm NIEDAX Model No.: BW 5 Type: BW5 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 823694

U-clamp, for angle iron, with strip-galvanized steel pressure pan according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-sided angle steel and U-iron with a max. leg length of 40 mm, counter pans (GWU...) and double pans (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 1426329

NIEDAX - Make: BW 50 AL
Cable clamp for angle iron, made entirely of aluminum with screw according to DIN EN ISO 1207, also used to ungleichschenkligem steel angle and channel iron with max. a side length of 40 mm, counter sink (GWU. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 46 - 50 mm
Angle iron dimensions
H x W x D: 40 x 40 x 4-6 mm

NIEDAX model no. BW 50 AL

Type: BW50AL
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 467735

U-clamp, for angle iron, with strip-galvanized steel pressure tray according to DIN EN 10346, bracket hot-dip galvanized according to DIN EN ISO 1461, can also be used on unequal-leg angle steel and U-iron with a max. leg length of 40 mm, counter trays (GWU...) must be ordered separately. Assignment: 1 cable for cable Ø: 50 - 54 mm Angle iron dimensions H x W x D: 40 x 40 x 4-6 mm
Sales unit: 50 pieces
Lieske Part No.: 507645