Die Rohrschellen des fischer Massiven Schienensystems FMS sind die Elemente zur Befestigung der Rohrleitungen an die Montageprofile FMP. Die Möglichkeiten der Bildung von Festpunkten oder Gleitlagern mit den Rohrschuhen FMPS ist mit Hilfe von weiteren Elementen aus dem FMS-System gewährleistet. Die Massivrohrschelle FMFSC sowie der Massive Rohrbügel FMPSU ermöglichen eine stabile und einfache Fixierung an das Montageprofil FMP. Verkaufseinheit: 1 ST.
Lieske Part No.: 540512

Die Rohrschellen des fischer Massiven Schienensystems FMS sind die Elemente zur Befestigung der Rohrleitungen an die Montageprofile FMP. Die Möglichkeiten der Bildung von Festpunkten oder Gleitlagern mit den Rohrschuhen FMPS ist mit Hilfe von weiteren Elementen aus dem FMS-System gewährleistet. Die Massivrohrschelle FMFSC sowie der Massive Rohrbügel FMPSU ermöglichen eine stabile und einfache Fixierung an das Montageprofil FMP. Verkaufseinheit: 1 ST.
Lieske Part No.: 540515

Die fischer Kälteschelle FRSK mit integrierter Spannbereichsanpassung ist eine zweischraubige Rohrschelle mit Schnellverschluss und Kombi-Anschlussgewinden M8/M10 oder M12/M16. Die Ausführung mit zwei Schrauben unterstützt die optimierte Anpassung an den Rohraußendurchmesser. Die Zweischraubigkeit und das Kombi-Anschlussgewinde erhöht die Flexibilität in der Montage. Damit können Rohrleitungen für die Kälte- und Klimatechnik mit einem Außendurchmesser von 10 - 219 mm und einer Dämmdicke von bis zu 19 mm installiert werden. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 2145215

Hose clamp SKM pipe clamp with rubber profile and reinforced mounting holes, suitable for all metal and plastic hoses Material: galvanized steel with rubber profile Temperature range: -40°C ... +120°C
Sales unit: 50 pieces
Lieske Part No.: 671975

Mounting bracket BW-M, for metric screw connections Angle plate with through hole and two mounting holes Material: steel, Eloc passivated Temperature range: -40°C ... +200°C
Sales unit: 25 pieces
Lieske Part No.: 777242

VSG-E is a stainless steel spacer clamp made of stainless steel material 1.4571 (V4A), AISI 316 TI. This spacer clamp is used for the stainless steel pipes V2 Steck-ES and V4 Steck-ES. The advantage is the secure installation. When used under extreme conditions, such as vibrations, overhead installations, high weights, etc., the use of closed stainless steel spacer clamps VSG-E is recommended. VDE 0605 DIN EN 61386-21
Sales unit: 10 pieces
Lieske Part No.: 126831

Aluminum clamp AKS-E Metric Aluminum Clamp for ALU plug ES and ALU PRO-ES
Size: 20
Type: AKS-20 E
Sales Unit: 1 ST.
Sales unit: 50 pieces
Lieske Part No.: 776012

clipfix-UV black is a plastic clamp made of modified PP, in black (RAL 9005), non-flame-propagating. This plastic clamp is used for the black plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 914102

clipfix-UV black is a plastic clamp made of modified PP, in black (RAL 9005), non-flame-propagating. This plastic clamp is used for the black plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 753543

clipfix-UV black is a plastic clamp made of modified PP, in black (RAL 9005), non-flame-propagating. This plastic clamp is used for the black plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 918867

clipfix-UV black is a plastic clamp made of modified PP, in black (RAL 9005), non-flame-propagating. This plastic clamp is used for the black plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 25 pieces
Lieske Part No.: 257409

Plastic clamp for FPKu-ES-F-UV black, and all conduits, non-flame, UV-stabilized, including clipsib securing bracket for type 4/5 Type: 5 BLACK UV CLIPFIX item:
ST.
Sales unit: 25 pieces
Lieske Part No.: 903557

clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 370142

clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 429091

clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 705130

clipfix-UV white is a plastic clamp made of modified polypropylene, in white (RAL 9010), non-flame-propagating. This plastic clamp is used for the white plastic straight pipe FPKu-EM-F-UV and for all corrugated pipes. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal U-clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 769812

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 161050

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 776186

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 50 pieces
Lieske Part No.: 878074

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 25 pieces
Lieske Part No.: 115860

clipfix-UV grey is a plastic clamp made of modified polypropylene, in grey (RAL 7035), non-flame-propagating. This plastic clamp is used for the grey plastic straight pipe FPKu-ES-F-UV and for all corrugated pipes. Clipfix safety brackets are included with the nominal widths 40 and 50. The clamps can be attached and lined up on a C-profile rail (10mm). When fastening under extreme conditions such as vibration, high temperatures, overhead, heavy weights, etc., the specified clamp spacing must be greatly reduced or replaced with metal bracket clamps (ASG-E). UV-stable for up to 10 years.
Sales unit: 25 pieces
Lieske Part No.: 886568

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 702361

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 702363

FIPLOCK® Befestigungsclip mit Sockel COPA-H mit Sockel aus speziell modifiziertem Polyamid 6, halogenfrei. Durch seine verstärkte Bodenplatte bietet er einen hervorragenden und verdreh sicheren Halt. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 834565

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen. Verkaufseinheit: 6 ST.
Sales unit: 6 pieces
Lieske Part No.: 2144891

FIPLOCK® Befestigungsclip COPA-S aus speziell modifiziertem Polyamid 6, halogenfrei. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Passend für C-Montageschienen. Verkaufseinheit: 6 ST.
Sales unit: 6 pieces
Lieske Part No.: 702366

FIPLOCK® Befestigungsclip mit Sockel COPA-H mit Sockel aus speziell modifiziertem Polyamid 6, halogenfrei. Durch seine verstärkte Bodenplatte bietet er einen hervorragenden und verdreh sicheren Halt. Der wiederverschließbare Deckel ist direkt am Clip angebracht. Verkaufseinheit: 4 ST.
Sales unit: 4 pieces
Lieske Part No.: 834566

FIPLOCK® Rohrschelle mit Lasche und Fixierungsrippe CPPA aus speziell modifiziertem Polyamid 6, halogenfrei. Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 834568

FIPLOCK® pipe clamp with double tab and fixing rib CUPA made of specially modified polyamide 6, halogen-free.
Sales unit: 6 pieces
Lieske Part No.: 673505

FIPLOCK® Rohrschelle mit Lasche CPSZ aus galvanisch verzinktem Stahl mit EPDM Schutz. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 834570

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, type: COS DN
Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 524578

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, type: COS DN 14



Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 635655

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents,


Type: COS DN20
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 344844

COS is a fastening clamp with an integrated rib made of polyamide 66. This is halogen-free, non-flame-propagating and available in black. The fastening clamp is used to fix the Co-flex corrugated pipes. It is provided with a web that prevents the pipe from slipping in the clamp. Special eyelets allow the pipe to be fixed using cable ties. Temperature resistance according to LV312-3: -30° C to +105° C. Flammability: UL 94 V2 / FMVSS 302.
Sales unit: 50 pieces
Lieske Part No.: 177081

Fixing clamp for Co-flex PP and PA6, fixed in the axial direction, non-flame, PA6, halogen free, self extinguishing Resistant to: fuels, mineral oils, fats, alkalis, common solvents, Type: CO-DN37 item:
ST.
Sales unit: 20 pieces
Lieske Part No.: 527519

FIPSPLIT® Kunststoff-Befestigungsclip 2CNPA aus speziell formuliertem Polyamid 6, halogenfrei, zur Befestigung von teilbaren Wellrohren. Seitlich angebrachte Schlitze in den Klammern ermöglichen bei Bedarf eine zusätzliche Sicherung der Wellrohre mit Kabelbinder. Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 834573

FIPSPLIT® Kunststoff-Befestigungsclip 2CNPA aus speziell formuliertem Polyamid 6, halogenfrei, zur Befestigung von teilbaren Wellrohren. Seitlich angebrachte Schlitze in den Klammern ermöglichen bei Bedarf eine zusätzliche Sicherung der Wellrohre mit Kabelbinder. Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 834574

For mounting recessed spotlights in drywall and acoustic construction. Suitable for panels and plasterboard. Offers thermal and mechanical advantages. Can be retrofitted in old and new buildings. For recesses of 62 to 90 mm in diameter. Maximum height of recessed lights limited to 70 mm. Safe distance between recessed light, vapor barrier film and insulation material. Reduces the risk of overheating and heat build-up. Can have a positive effect on the service life of the lamp. Tested in accordance with EN 60598-1 and EN 60598-2-2. SpotClip-I is a new product development for mounting lights in drywall and acoustic construction. The innovative four-legged spacer for recessed spotlights has numerous advantages and is suitable for use in both panels and plasterboard (GKP). SpotClip-I is made of non-flammable, glass fiber reinforced polyamide. This offers a range of thermal and mechanical advantages and can also be retrofitted. This opens up a wide range of possible applications in both old and new buildings.
Lieske Part No.: 637360

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 176049

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1400 pieces
Lieske Part No.: 1129381

Fastening element with rounded expansion anchor. For minimized installation height behind the hole, space-saving. Defined bundle diameter. For subsequent assembly of bundled goods. These holders can be ideally used wherever space-saving work is required. In the event of maintenance, the pipes and cable harnesses can be replaced.
Sales unit: 2500 pieces
Lieske Part No.: 2058148

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 1000 pieces
Lieske Part No.: 982589

Sales Unit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 176044

Low profile design for applications where space is limited. Self-adhesive bases for quick and easy installation. Used without additional cable ties. Offers potential for process optimization. Various sizes available for different bundle diameters. Cost-effective solution and easy installation. Suitable for applications on smooth, clean surfaces. The RB series self-adhesive bases offer greater routing freedom and reduce the risk of corrosion compared to screw fastenings. They are ideal for tool-free installation and can be reopened and reused. This is especially useful when bundles need to be replaced quickly and easily. The RB series can be used without cable ties and offers process optimization potential for a wide range of applications.
Sales unit: 50 pieces
Lieske Part No.: 1135033

Easy attachment of ribbon cables. Made of PVC (polyvinyl chloride).
Sales unit: 5000 pieces
Lieske Part No.: 2050603

Fastening clips can be freely rotated by 360°. Simply clip onto hose, pipe or cable. For parallel guidance of two bundles at a defined distance. Also suitable for subsequent installation. This particularly easy-to-install series connects two bundled goods of different sizes and types. The mobility of the fastening element offers a secure hold even under difficult conditions, such as vibrations, and protects the cables or bundles.
Sales unit: 4000 pieces
Lieske Part No.: 2058150

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 382989

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 748543

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 892150

The bases and clips for Helawrap are flexible and efficient. They enclose the protective tube for a firm hold. Each clip can be attached to each other or to a mounting plate. Each clip is freely movable. Easy to attach and reusable. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 695532