Sales unit: 100 pieces
Lieske Part No.: 820405

Sales unit: 100 pieces
Lieske Part No.: 803031

Sales unit: 100 pieces
Lieske Part No.: 803076

Sales unit: 100 pieces
Lieske Part No.: 803165

Sales unit: 100 pieces
Lieske Part No.: 803222

Sales unit: 100 pieces
Lieske Part No.: 818518

Sales unit: 100 pieces
Lieske Part No.: 818520

Sales unit: 100 pieces
Lieske Part No.: 818563

Sales unit: 100 pieces
Lieske Part No.: 818285

Sales unit: 100 pieces
Lieske Part No.: 819477

Sales unit: 100 pieces
Lieske Part No.: 810660

Sales unit: 100 pieces
Lieske Part No.: 818132

Sales unit: 100 pieces
Lieske Part No.: 818958

Sales unit: 100 pieces
Lieske Part No.: 819311

Sales unit: 100 pieces
Lieske Part No.: 818174

Sales unit: 100 pieces
Lieske Part No.: 818825

Sales unit: 100 pieces
Lieske Part No.: 803026

Sales unit: 100 pieces
Lieske Part No.: 803131

Sales unit: 100 pieces
Lieske Part No.: 803178

Sales unit: 100 pieces
Lieske Part No.: 818487

Lieske Part No.: 727111

Sales unit: 100 pieces
Lieske Part No.: 526550

Lieske Part No.: 264943

Spacer for air-termination rods to maintain the separation distance in accordance with DIN EN 62305-3 (VDE 0185-305-3). Spacer rod made of glass-fiber reinforced plastic (GRP) D16 mm, UV-stabilized, color light gray, material factor km= 0.7. Version with rod holder (fixed cable routing) and pipe clamp (clamping range D50-300 mm).
Lieske Part No.: 457402

Pipe clamp with mounting bushing for spacer rod (D16 mm), for pipes up to 60 mm diameter.
Lieske Part No.: 784493

Antenna pipe clamp according to DIN EN 62561-1, for connecting pipes to the protective and functional equipotential bonding according to DIN VDE 0100-410/540 and the lightning protection equipotential bonding according to DIN EN 62305-3 (VDE 0185-305-3). Complete with continuously adjustable clamping band made of stainless steel, for connecting 1 conductor Rd D10 mm or 1-2 conductors Rd D6-8 mm or 4-50 mm² (single-/multi-wire).
Lieske Part No.: 271910

Dutchclamp® SE cable clamps were specially developed for the short-circuit-proof fastening of single-core or multi-core medium and high-voltage cables. SE types are available in 7 models and are suitable for cables with a diameter of 15mm to 170mm.
Dutchclamp® SE cable clamps are unique in their kind. The surfaces on which the cables are laid are free of sharp edges and therefore ensure perfect pressure distribution and maximum hold. This way there are no point loads on
the cables and the cables are not damaged. Dutchclamp SE cable clamps are made from glass fiber reinforced polyamide of the highest quality. This makes them ideal for use in systems in which very high short-circuit forces are released.
The unique raw material used to manufacture the cable clamps makes them resistant to corrosion, ozone, frost, heat, oil, acids, salts, aggressive chemicals, UV radiation and nuclear radiation. At temperatures between -40 °C and +125 °C
(briefly up to 225 °C) there is no reduction in strength. Sales unit: 1 ST.
Lieske Part No.: 556916

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 33 mm (1 5/16¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1264075

Easy installation to support flanges. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263608

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1263620

Easy installation to support flanges. Pivot bearing to support various cable directions. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single bracket alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1264062

Non-continuous cable management solution combined with CADDY attachment to threaded rods. 33 mm (1 5/16¿) J-hook with multifunctional M4-M8 (1/4¿) threaded rod hanger that combines optimal support and easy installation.
Sales unit: 50 pieces
Lieske Part No.: 1264105

With insert, the metal cable bracket achieves a functional integrity of E30 according to DIN 4102-12.
Sales unit: 50 pieces
Lieske Part No.: 2068517

Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 683620

Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 683621

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261415

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261141

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261140

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427786

Spring steel cable clip that supports the cable or PVC conduit on or under the support flanges. 10-11mm cable for 4-7mm flange, slide onto the flange for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261760

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261416

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261152

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427799

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1427784

For attaching cables or plastic cable protection pipes to ceilings. The snap clip for attaching to the ceiling. For mounting in two different orientations. Fits into any hole of 6 mm or larger.
Sales unit: 100 pieces
Lieske Part No.: 1261142

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261178

The clever way to attach cables and cable ducts to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1261417

Captive threaded pin minimizes the need for additional components.
Sales unit: 100 pieces
Lieske Part No.: 1264096

Sales unit: 1 PC.
Lieske Part No.: 2116241

Galvanized pipe clamp with threaded combination nut and soundproofing insert, for use with non-insulated metal pipes. Use with pipe 15-19mm M8/M10 thread.
Sales unit: 100 pieces
Lieske Part No.: 326589