The nail clamp is ideal for laying cables easily. It can be used flexibly for cables with different diameters. The hardened steel nail ensures that cables are securely attached to concrete and wood. Silicone and halogen free.
Sales unit: 100 pieces
Lieske Part No.: 2022266

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 200 pieces
Lieske Part No.: 2022267

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 150 pieces
Lieske Part No.: 2022268

Natural plastic discs made of polyethylene with a pre-mounted nail made of hardened steel. Several cables can be attached in one operation. Cables can be quickly attached in wall slots or on the masonry before plastering. Can be used in narrow or wide wall slots thanks to the shape.
Sales unit: 100 pieces
Lieske Part No.: 2022269

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 100 pieces
Lieske Part No.: 2022272

Grey fastening clamp made of plastic/polypropylene is suitable for simple and precise fastening of steel armored pipes in accordance with DIN 49020 and heavy insulating pipes in accordance with DIN 49016. During assembly, assembly corrections can be made using a 6 mm impact dowel or wood screw through the slot. The fastening clamps can be inserted into C-profile rails with a slot width of 11 mm and can be aligned with almost all common pipe clamps.
Instructions for use 5 mm hole:
Impact assembly 5 mm nail dowel, screw assembly or assembly on M6 thread Instructions
for use 6 mm hole:
Impact assembly 6 mm nail dowel, screw assembly (head diameter 8 mm)
Sales unit: 100 pieces
Lieske Part No.: 2022273

The metal mounting tape made of galvanized steel is the ideal companion for the impact anchor. It has a length of 10 m in the packaging unit and is used to attach pipes to concrete.
Lieske Part No.: 2022278

The fabric tape is the ideal companion for the impact anchor. It has a length of 15 m in the packaging unit. It is ideal for attaching pipes and cables to concrete. It is made from high-quality polypropylene and is therefore UV-stabilized. Due to its tear resistance, the fabric tape can be used in many different ways.
Lieske Part No.: 2022280

With the practical RED Clip, you can quickly and tool-free fix cables in wall pipe slots up to 55 mm. The RED Clip has a high clamping force and thanks to its color neutrality, the clip is not visible in the plaster even after processing. In addition, no cables are damaged and it is easy to install thanks to the eyelet for the finger.
Sales unit: 50 pieces
Lieske Part No.: 2022314

The practical RED BOXX Mini nail clamps are versatile. The dividers supplied can be used individually and are flush with the lid.
In this version, you get the RED BOXX Mini with 300 each of the RED nail clamps type BFM NSMN 4-7/18 gray and 7-12/35 gray.
With the RED BOXX Mini, also available as an empty version, you can also conveniently store your own small material requirements and pre-sort them perfectly for you.
The transparent lid lets you see at a glance what contents you are storing in the RED BOXX Mini.
Another advantage of the RED BOXX Mini is that they can be cleverly stacked on top of each other and connected to each other using the intelligent click system. This turns a RED BOXX Mini into a complete system.
The pre-assembled galvanized nail of the nail clamp enables quick fastening and reduces assembly time. The small space required for fastening makes assembly easier in confined spaces.
Contents
300 pieces nail clamp BFM NSMN 4-7/18
300 pieces nail clamp BFM NSMN 7-12/35
Lieske Part No.: 2022443

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022457

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022458

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022462

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022465

The RED U-clamps are designed with a hammer head base for use in C-profile rails with a slot width of 16-17 mm. The hexagon screws with additional Phillips drive are used to quickly fix cables and pipes. Screw thread M6, screw head with wrench size 10 and Phillips drive Pozidriv 3.
Technical data
. Pressure pan and counter pan: polypropylene, color black
Lieske Part No.: 2022466

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022752

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 50 pieces
Lieske Part No.: 2022753

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 200 pieces
Lieske Part No.: 2022754

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022755

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023187

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023188

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023189

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023190

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023191

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023192

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023193

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023194

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023195

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023196

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023197

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023198

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023199

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023200

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 2135541

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 681983

The 30 meter long knotted chain with a thickness of 2.5x35 mm for use in accordance with DIN 5686. It is housed in a sealable and reusable bucket with a capacity of 5 liters. The steel chain has a breaking load of 440 N and is galvanized/electrolytically galvanized.
Lieske Part No.: 1062765

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit
Lieske Part No.: 877396

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit
Lieske Part No.: 877350

Lieske Part No.: 2022010

Zugentlastungsklemme, Gehäuse aus Edelstahl 1.4301, Spannbereich 8,5 bis 18 mm Ø, Zugentlastung bis 2,5 kN, z.B. für hängende Kabel, - Spannbereich 8,5 mm bis 18 mm Durchmesser, - Hakendurchmesser: 26 mm, - maximale Zugbelastung 2,5 kN, - Gehäuse aus Edelstahl 1.4301, - Spannbacken und Führungsklammern aus glasfaserverstärktem PA (schwarz)
Lieske Part No.: 835234

Mounting clamp for attachment to the mast. Mast diameter 95-114 mm. Stainless steel with galvanized screw material. Sliding span for different mounting heights.
Lieske Part No.: 1334034

Mounting clamp for attachment to the mast. Mast diameter 115-135 mm. Stainless steel with galvanized screw material. Sliding span for different attachment heights.
Lieske Part No.: 1334033

Nail clamp TC2-3 (1.4/15/11mm) natural 100 pieces/pack. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1859040

Nail clamp TC 3-5 nail: (1.2/20/15mm) natural
Sales unit: 100 pieces
Lieske Part No.: 403320

Nail clamp TC4-6 (1.4/20/14mm) natural. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in various thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1852635

Nail clamp TC 5-7 nail: (1.2/20/12mm) natural
Sales unit: 100 pieces
Lieske Part No.: 173401

Nail clamp TC5-7 (1.2/20/12mm) white. Safety pins bend these instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Lieske Part No.: 1851484

Nail clamp TC5-7 nail: (1.2/20/12mm) grey
Sales unit: 100 pieces
Lieske Part No.: 729055

Sales unit: 100 pieces
Lieske Part No.: 511454

Nail clamp TC7-10 Nail: (1.6/30/21mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 493875