Can be screwed onto M6 thread. Size 27 FT is suitable for M25. Size 42.5 FT is suitable for M40. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 20 pieces
Lieske Part No.: 281736

Can be screwed onto M8 thread. Size 27 FT is suitable for M25. Size 42.5 FT is suitable for M40. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Lieske Part No.: 318793

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 25 pieces
Lieske Part No.: 1316260

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 25 pieces
Lieske Part No.: 1316275

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 25 pieces
Lieske Part No.: 1316261

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 25 pieces
Lieske Part No.: 1315347

Can be screwed onto M10 thread. Size 27 FT is suitable for M25. Size 48.5 FT is suitable for M50. Size 60 FT is suitable for M63.
Sales unit: 15 pieces
Lieske Part No.: 285501

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 233297

Tension wire clamp for rope 4-9mm 11-16mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 222201

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 197788

Tension wire clamp for rope 4-9mm 14-18mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 889760

For attaching cables to tensioning cables. With screw M4x13.
Sales unit: 50 pieces
Lieske Part No.: 945056

Tension wire clamp for rope 4-9mm 19-28mm. With V4A screw M4x14.
Sales unit: 50 pieces
Lieske Part No.: 854052

Rust-proof coated support clamp, screwless, with locking spring, suitable for profile rails type CML3518 and CMS3518. For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of 2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 50 pieces
Lieske Part No.: 574832

Rust-proof coated support clamp, screwless, with locking spring, suitable for profile rails type CML3518 and CMS3518. For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of 2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 50 pieces
Lieske Part No.: 521994

For quick attachment to steel profiles when installing cable trays, U-clamps, light suspensions, etc. A complete system consists of
2 support clamps and a piece of C-profile rail of any length, as well as 2 protective caps.
Sales unit: 5 pieces
Lieske Part No.: 123175

Sales unit: 100 pieces
Lieske Part No.: 208856

Strain relief clamp 6.5mm
Sales unit: 100 pieces
Lieske Part No.: 332669

Strain relief clamp 6.5mm
Sales unit: 100 pieces
Lieske Part No.: 604135

Strain relief clamp 8mm
Sales unit: 100 pieces
Lieske Part No.: 939080

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 600717

Strain relief clamp 8mm
Sales unit: 100 pieces
Lieske Part No.: 682738

Type: 7903 9 G
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 327083

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 126515

Strain relief clamp 5mm
Sales unit: 100 pieces
Lieske Part No.: 633258

Strain relief clamp 6mm
Sales unit: 100 pieces
Lieske Part No.: 238636

In rings.
Sales unit: 200 meters
Lieske Part No.: 1321421

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069871

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069872

Perforated mounting tape with PE plastic coating, in a roll-off box.
Lieske Part No.: 2069873

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069874

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069875

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069876

Perforated mounting tape in corrugated form, for mounting pipes on walls and ceilings, for example. In a roll-off container.
Lieske Part No.: 2069877

Two-joint beam clamp for fastening to beams without welding or drilling. The maximum load depends on the direction of the load.
Sales unit: 10 pieces
Lieske Part No.: 978016

The B9/T... damp room cable junction box: consists of two different halogen-free plastic components, 2 additional entries in the floor with a push-through membrane
(for cable diameters up to 15 mm)
with a push-through membrane (for cable diameters up to 15 mm) in the floor area.
When using the cable glands (additional strain relief), it is not necessary to remove the membrane (time saving). Protection class IP 67 with a push-through membrane and with a cable gland without removing the push-through membrane.
Nominal voltage 400 V, nominal cross section 4 ÷ 6 mm².
The cover is screwed on with 4 pre-assembled, captive quick-release cover fasteners (180°) and can be sealed.
The fastening holes are also injected with a soft plastic component, for screw diameters 5 mm (distance 75 mm). Clear internal dimensions 98x98x40
Sales unit: 5 pieces
Lieske Part No.: 969731

Pressure clamps easy with slotted hole and thread M 6 and a small adhesive base color gray cable diameter:
4-24 mm Type: 3 5
/ LGK
4-24 Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 826801

With adhesive base, slotted hole and for screwing onto M6 thread.
To glue the polystyrene clamps to masonry and concrete, use Impu-Fix quick adhesive for strip cable type 509.
Sales unit: 25 pieces
Lieske Part No.: 415999

Grip clips / clamps with sliding slot and for screwing to M6 thread, adhesive base, halogen-free material impact-resistant polystyrene Type:
Double clamping range: 6 -
6 mm Type: 4 3 / LGK 6 -
6 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 863762

Grip clips / sliding clamps with slot and for screwing to M6 thread, adhesive base, halogen-free material impact-resistant polystyrene version:
Double clamping range:
4 - 24 mm Type: 3 4
/ LGK
6-24 Quantity:
ST.
Lieske Part No.: 911867

Grip clips / sliding clamps
with slot and for screwing to M6 thread, adhesive base,
halogen-free

Material impact-resistant polystyrene
Model: 1-way
Clamping range: 24 - 34 mm Type: 3042/LGK 24-34


Quantity: 1 unit.
Lieske Part No.: 447424

Grip clips / sliding clamps with slot and for screwing to M6 thread, adhesive base, halogen-free material impact-resistant polystyrene type: 2-way clamping range: 2 x 6 -
6 mm Type: 4 3 / 2LGK 6 -
6 item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 988640

Grip clips / sliding clamps

with slot and for screwing to M6 thread, adhesive base,

halogen-free



Material impact-resistant polystyrene

Design: 2-way

Clamping range: 2 x 16 - 24 mm

Type: 16-24 3041/2LG item: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 390493

Grip clips / sliding clamps with slot and for screwing to M6 thread, adhesive base, halogen-free material impact-resistant polystyrene Design: 3-way clamping range: 3 x 6 -
6 mm Type: 3 4/6 3LG -
6 item: 25 ST.
Lieske Part No.: 954262

For 2 cables, with adhesive base, elongated hole and for screwing onto M6 thread.
To glue the polystyrene clamps to masonry and concrete, use Impu-Fix quick-release adhesive type 509 for flat cable.
Sales unit: 25 pieces
Lieske Part No.: 211792

SOM (R) clamps
3079-3082: with plastic screws, so
corrosion-protected, with hole for fixing
by means of wood screws or dowels 5 mm stroke
PS polystyrene, light gray RAL 7035
Clamping range: 5 - 14 mm

Type: 3079 5-14
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 195522

SOM (R) clamps
3079-3082: with plastic screws, so
corrosion-protected, with hole for fixing
by means of wood screws or dowels 5 mm stroke
PS polystyrene, light gray RAL 7035
Clamping range: 6 - 17 mm

Type: 3080 6-17
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 569235

SOM (R) Clamps 3 79 to 3 82: with plastic screws, so corrosion-protected, with hole for fastening with screws or knock-in anchor 5 mm PS Polystyrene, light gray RAL 7 35 Clamping range:
5-25 mm Type: 3 8 5-25 Quantity: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 829868

SOM (R) Clamps 3 79 to 3 82: with plastic screws, so corrosion-protected, with hole for fastening with screws or knock-in anchor 5 mm PS Polystyrene, light gray RAL 7 35 Clamping range: 24 - 34 mm Type: 3 82 24-34 Quantity: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 840148

With plastic screws, therefore corrosion-proof, with long hole for fastening with wood screws or 5 mm impact dowels.
Flame retardant.
Sales unit: 20 pieces
Lieske Part No.: 829108