Innenverzahnter Kabelbinder mit hohen Haltekräften. Schlankes, abgerundetes Kopfdesign. Platzsparende Befestigungslösung. Einfache Verarbeitung durch geringe Einschlaufkräfte. Sicheres Befestigen ohne seitliches Verrutschen. Erfüllt die SAE Luftfahrt-Spezifikation. Die X-Serie bietet im Vergleich zu herkömmlichen Kabelbindern ein optimiertes Kabelbinderdesign kombiniert mit geringeren Einschlaufkräften. Der abgerundete Kabelbinderkopf der X-Serie eignet sich besonders für den Einsatz in engen Verbauräumen. Die Innenverzahnung sorgt für einen guten Halt am Bündelgut. Erhältlich in den Materialien UV witterungsstabil (PA66W) sowie schlagzäh-hitzestabilisiert (PA66HIRHS) verfügen die Kabelbinder der X-Serie über ein breites Anwendungsspektrum für verschiedenste Umgebungsbedingungen, wie zum Beispiel höhere Temperaturen oder in kalten Klimazonen.
Sales unit: 80000 pieces
Lieske Part No.: 2058158

Innenverzahnter Kabelbinder mit hohen Haltekräften. Schlankes, abgerundetes Kopfdesign. Platzsparende Befestigungslösung. Einfache Verarbeitung durch geringe Einschlaufkräfte. Sicheres Befestigen ohne seitliches Verrutschen. Erfüllt die SAE Luftfahrt-Spezifikation. Die X-Serie bietet im Vergleich zu herkömmlichen Kabelbindern ein optimiertes Kabelbinderdesign kombiniert mit geringeren Einschlaufkräften. Der abgerundete Kabelbinderkopf der X-Serie eignet sich besonders für den Einsatz in engen Verbauräumen. Die Innenverzahnung sorgt für einen guten Halt am Bündelgut. Erhältlich in den Materialien UV witterungsstabil (PA66W) sowie schlagzäh-hitzestabilisiert (PA66HIRHS) verfügen die Kabelbinder der X-Serie über ein breites Anwendungsspektrum für verschiedenste Umgebungsbedingungen, wie zum Beispiel höhere Temperaturen oder in kalten Klimazonen.
Sales unit: 200 pieces
Lieske Part No.: 838285

Internally toothed cable tie with high holding forces. Slim, rounded head design. Space-saving fastening solution. Easy to process due to low looping forces. Secure fastening without slipping sideways. Meets the SAE aviation specification. Compared to conventional cable ties, the X-series offers an optimized cable tie design combined with lower looping forces. The rounded cable tie head of the X-series is particularly suitable for use in tight installation spaces. The internal toothing ensures a good hold on the bundled goods. Available in UV weather-resistant (PA66W) and impact-resistant heat-stabilized (PA66HIRHS) materials, the X-series cable ties have a wide range of applications for a wide variety of environmental conditions, such as higher temperatures or in cold climates.
Sales unit: 600 pieces
Lieske Part No.: 2058160

Internally toothed cable tie with high holding forces. Slim, rounded head design. Space-saving fastening solution. Easy to process due to low looping forces. Secure fastening without slipping sideways. Meets the SAE aviation specification. Compared to conventional cable ties, the X-series offers an optimized cable tie design combined with lower looping forces. The rounded cable tie head of the X-series is particularly suitable for use in tight installation spaces. The internal toothing ensures a good hold on the bundled goods. Available in UV weather-resistant (PA66W) and impact-resistant heat-stabilized (PA66HIRHS) materials, the X-series cable ties have a wide range of applications for a wide variety of environmental conditions, such as higher temperatures or in cold climates.
Sales unit: 50 pieces
Lieske Part No.: 2057336

Internally toothed cable tie with high holding forces. Slim, rounded head design. Space-saving fastening solution. Easy to process due to low looping forces. Secure fastening without slipping sideways. Meets the SAE aviation specification. Compared to conventional cable ties, the X-series offers an optimized cable tie design combined with lower looping forces. The rounded cable tie head of the X-series is particularly suitable for use in tight installation spaces. The internal toothing ensures a good hold on the bundled goods. Available in UV weather-resistant (PA66W) and impact-resistant heat-stabilized (PA66HIRHS) materials, the X-series cable ties have a wide range of applications for a wide variety of environmental conditions, such as higher temperatures or in cold climates.
Sales unit: 24000 pieces
Lieske Part No.: 2058159

Innenverzahnter Kabelbinder mit hohen Haltekräften. Schlankes, abgerundetes Kopfdesign. Platzsparende Befestigungslösung. Einfache Verarbeitung durch geringe Einschlaufkräfte. Sicheres Befestigen ohne seitliches Verrutschen. Erfüllt die SAE Luftfahrt-Spezifikation. Die X-Serie bietet im Vergleich zu herkömmlichen Kabelbindern ein optimiertes Kabelbinderdesign kombiniert mit geringeren Einschlaufkräften. Der abgerundete Kabelbinderkopf der X-Serie eignet sich besonders für den Einsatz in engen Verbauräumen. Die Innenverzahnung sorgt für einen guten Halt am Bündelgut. Erhältlich in den Materialien UV witterungsstabil (PA66W) sowie schlagzäh-hitzestabilisiert (PA66HIRHS) verfügen die Kabelbinder der X-Serie über ein breites Anwendungsspektrum für verschiedenste Umgebungsbedingungen, wie zum Beispiel höhere Temperaturen oder in kalten Klimazonen.
Sales unit: 400000 pieces
Lieske Part No.: 2058154

Innenverzahnter Kabelbinder mit hohen Haltekräften. Schlankes, abgerundetes Kopfdesign. Platzsparende Befestigungslösung. Einfache Verarbeitung durch geringe Einschlaufkräfte. Sicheres Befestigen ohne seitliches Verrutschen. Erfüllt die SAE Luftfahrt-Spezifikation. Die X-Serie bietet im Vergleich zu herkömmlichen Kabelbindern ein optimiertes Kabelbinderdesign kombiniert mit geringeren Einschlaufkräften. Der abgerundete Kabelbinderkopf der X-Serie eignet sich besonders für den Einsatz in engen Verbauräumen. Die Innenverzahnung sorgt für einen guten Halt am Bündelgut. Erhältlich in den Materialien UV witterungsstabil (PA66W) sowie schlagzäh-hitzestabilisiert (PA66HIRHS) verfügen die Kabelbinder der X-Serie über ein breites Anwendungsspektrum für verschiedenste Umgebungsbedingungen, wie zum Beispiel höhere Temperaturen oder in kalten Klimazonen.
Sales unit: 375000 pieces
Lieske Part No.: 2058155

Type: Q30L-W-BK-C1

Sales unit: 100 pieces
Lieske Part No.: 743817

Pneumatic processing tool. Robust metal housing. For cable ties up to 4.8 mm wide. Reliable tensioning and automatic flush cutting. Continuous tension adjustment. High tying speed. Reliable and low-maintenance. The advantages of the MK3PNSP2, which operates with an air pressure of up to 6 bar, are fully evident in large-scale production, on the assembly line or in cable assembly.
Lieske Part No.: 307004

Bundles tools MK2 / 2
Handy and rugged bundles tools for problem-free and easy tying and cutting of cable ties. Version: for bandwidths up to 4.8 Type: MK2 BLUE Quantity:
ST.
Lieske Part No.: 817505

Lightweight, ergonomic processing tool. For tensioning and tying off standard cable ties. Ideal for on-site assembly. Assembled and pre-tensioned cable ties are cut off by turning the tool. Simply apply the cable ties, tension them and turn to cut them off.
Lieske Part No.: 354398

Type: T150M-PA66-BK-Q1

Sales unit: 25 pieces
Lieske Part No.: 619529

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 30000 pieces
Lieske Part No.: 1133511

LFPC protective profile made of polyolefin. For the MBT, MST, MLT and AMT series. Smooth surface protects bundled goods even when subjected to vibration. Halogen-free material. Low development of toxic gases and corrosive acids. Low smoke development, flame retardant. The LFPC protective profile made of polyolefin is suitable for the cable ties of the MBT, MST, MLT and AMT series and can protect the bundled goods from abrasion and damage even when subjected to vibration. Ideal for use under difficult conditions, for example on ships, oil platforms or in industrial plants.
Sales unit: 25 meters
Lieske Part No.: 1344605

LFPC protective profile made of polyolefin. For the MBT, MST, MLT and AMT series. Smooth surface protects bundled goods even when subjected to vibration. Halogen-free material. Low development of toxic gases and corrosive acids. Low smoke development, flame retardant. The LFPC protective profile made of polyolefin is suitable for the cable ties of the MBT, MST, MLT and AMT series and can protect the bundled goods from abrasion and damage even when subjected to vibration. Ideal for use under difficult conditions, for example on ships, oil platforms or in industrial plants.
Sales unit: 300 meters
Lieske Part No.: 1133537

Type: MBT5SFC SS316, SP BK 100 ST
Lieske Part No.: 256618

MBT metal cable ties made of stainless steel SS316 (V4A) with a polyester coating. High holding power with a permanent locking head. Plastic coating for sensitive bundled goods and to prevent contact corrosion. Easy to loop through the forked band end. Coating for improved installation convenience at low temperatures. Stainless steel cable ties with a plastic coating offer a high level of installation convenience, especially when used outdoors at low temperatures. The coated products are used wherever the strong holding power of a metal cable tie is required and at the same time sensitive bundled goods require gentle fastening.
Sales unit: 100 pieces
Lieske Part No.: 973177

The fully coated cable ties of the MBT-series are made of stainless steel SS316 and have a plastic coating of polyester.
The coating offers various advantages: The cable tie stainless steel has softer edges. The feel and the ease of installation improve. The fully coated products can be used if galvanic corrosion is to be avoided. Type: MBT14SFC SS316, SP BK 100 ST item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 725859

Quantity: 2000 ST.
Sales unit: 100 pieces
Lieske Part No.: 194856

MBT metal cable ties made of stainless steel SS316 (V4A) with a polyester coating. High holding power with a permanent locking head. Plastic coating for sensitive bundled goods and to prevent contact corrosion. Easy to loop through the forked band end. Coating for improved installation convenience at low temperatures. Stainless steel cable ties with a plastic coating offer a high level of installation convenience, especially when used outdoors at low temperatures. The coated products are used wherever the strong holding power of a metal cable tie is required and at the same time sensitive bundled goods require gentle fastening.
Sales unit: 100 pieces
Lieske Part No.: 1242738

Type: MBT14HFC SS316,SP BK 50 ST

Sales unit: 100 pieces
Lieske Part No.: 815046

MBT metal cable ties made of stainless steel SS316 (V4A) with a polyester coating. High holding power with a permanent locking head. Plastic coating for sensitive bundled goods and to prevent contact corrosion. Easy to loop through the forked band end. Coating for improved installation convenience at low temperatures. Stainless steel cable ties with a plastic coating offer a high level of installation convenience, especially when used outdoors at low temperatures. The coated products are used wherever the strong holding power of a metal cable tie is required and at the same time sensitive bundled goods require gentle fastening.
Sales unit: 100 pieces
Lieske Part No.: 2055818

MBT metal cable ties made of stainless steel SS316 (V4A) with a polyester coating. High holding power with a permanent locking head. Plastic coating for sensitive bundled goods and to prevent contact corrosion. Easy to loop through the forked band end. Coating for improved installation convenience at low temperatures. Stainless steel cable ties with a plastic coating offer a high level of installation convenience, especially when used outdoors at low temperatures. The coated products are used wherever the strong holding power of a metal cable tie is required and at the same time sensitive bundled goods require gentle fastening.
Sales unit: 100 pieces
Lieske Part No.: 466869

Type: MBT20XHFC SS316,SP BK 50 ST

Sales unit: 100 pieces
Lieske Part No.: 678369

MBT metal cable ties made of stainless steel SS316 (V4A) with a polyester coating. High holding power with a permanent locking head. Plastic coating for sensitive bundled goods and to prevent contact corrosion. Easy to loop through the forked band end. Coating for improved installation convenience at low temperatures. Stainless steel cable ties with a plastic coating offer a high level of installation convenience, especially when used outdoors at low temperatures. The coated products are used wherever the strong holding power of a metal cable tie is required and at the same time sensitive bundled goods require gentle fastening.
Sales unit: 100 pieces
Lieske Part No.: 611950

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 1239188

Type: AMT10L16SB SS316 NA 10 ST

Sales unit: 100 pieces
Lieske Part No.: 934724

AMT-Kabelbinder mit sehr hoher Haltekraft. Robuste Verschlusstechnik. Verfügbar in rostfreiem Edelstahl 316L. Das AMT-Kabelband ist für Schwerlastanwendungen entwickelt worden. Das Band wird gefaltet und zusätzlich durch Stege im Verschlussbereich gesichert. So kann eine starke Fixierung erreicht werden, die höchsten physikalischen Anforderungen wie Vibrationen standhält. AMT-Binder werden z.B. im Schienenfahrzeug- oder Schiffbau oder in der Schwerindustrie eingesetzt.
Sales unit: 100 pieces
Lieske Part No.: 508086

Very large selection of materials and sizes. High holding power with very low looping force. Use of high-quality plastic. Supports our customers' recycling goals. Internal teeth for a secure hold on the bundle. Convenient looping thanks to the angled band end. Easy to process by hand or with tools (process-reliable). T-series cable ties can be used in a wide variety of ways. They are used wherever cables, lines or hoses need to be bundled and fastened. The variety of materials used in the cable ties enables the T-series to be used universally in a wide range of applications.
Sales unit: 100 pieces
Lieske Part No.: 2056810

UV-weather-resistant cable ties in a wide range of types. Made from 100% high-quality plastic, so easy to recycle. Internal teeth for a secure hold on the bundle. Easy to process by hand or with tools (process-reliable). Easy to loop through the angled end of the band. These internally toothed cable ties are made from UV-resistant polyamide 6.6 (PA66W) and are suitable for outdoor applications. Compared to conventional cable ties made from PA66, UV-stabilized cable ties withstand UV radiation for a much longer period of time. PA66W cable ties are therefore recommended for bundling and fastening cables, pipes and hoses outdoors.
Sales unit: 100 pieces
Lieske Part No.: 192751

Type: T250XL-PA66-NA-Q1
Sales unit: 2500 pieces
Lieske Part No.: 286972

Type: T50R PA46 NA 100 ST

Sales unit: 100 pieces
Lieske Part No.: 640175

Type: T50L-PA46-NA-C1

Sales unit: 100 pieces
Lieske Part No.: 308423

Type: T18R-TZ-BU-C1

Sales unit: 100 pieces
Lieske Part No.: 477561

Type: T30R E/TFE BU 100 ST

Sales unit: 100 pieces
Lieske Part No.: 744126

Hohe chemische Beständigkeit. Zu 100 % aus hochwertigem Kunststoff, daher gut zu recyclen. Innenverzahnung für sicheren Halt am Bündel. Einfache Verarbeitung von Hand oder mit Werkzeug (prozesssicher). Bequemes Einschlaufen. Hohe Temperaturbeständigkeit. Nicht hygroskopisch. Kabelbinder der T-Serie sind vielfältig zu verwenden für die Bündelung und Befestigung von Kabeln, Leitungen und Schläuchen insbesondere, wenn eine hohe chemische Beständigkeit gefordert ist.
Sales unit: 100 pieces
Lieske Part No.: 941691

Type: T50R-TZ-BU-C1

Sales unit: 100 pieces
Lieske Part No.: 621057

Type: MCT30R1503,5PA66MP

Sales unit: 100 pieces
Lieske Part No.: 898333

Detectable using metal devices (result depends on the respective application and equipment). Even individual sections can be located using metal pigments throughout the entire strip. Striking blue for easy visual recognition. High-quality solution for reducing product contamination. Can support quality assurance within food production, for example within the framework of HACCP. MCT cable ties are particularly suitable for use in the pharmaceutical and chemical industries as well as in food and animal feed production. The cable ties are suitable for closing transport containers, containers and bags. The MCT cable ties are also used for installing cables and lines on production systems.
Sales unit: 100 pieces
Lieske Part No.: 951657

Type: MCT50L-N66M-BU-C1

Sales unit: 100 pieces
Lieske Part No.: 828930

Detectable via metal devices (result depends on the respective application and equipment). Even individual sections can be located using metal pigments throughout the entire belt. Striking blue for easy visual recognition. High-quality solution to reduce product contamination. Can support quality assurance within food production, for example within the framework of HACCP. Cable ties are detachable and reusable. MCT cable ties are particularly suitable for use in the pharmaceutical and chemical industries as well as in food and animal feed production. The cable ties are suitable for closing transport containers, containers and bags. The MCT cable ties are also used to install cables and lines on production systems. The MCTRELK cable ties are detachable and can be reused.
Sales unit: 100 pieces
Lieske Part No.: 1239201

The cable ties are made entirely of plastic, making them easy to recycle. The internal teeth on the belt ensures a secure hold on the bundles. The cable tie can be easily processed by hand or for a process-safe use of a tool (see Chapter 6). The slightly angled end of the tape allows for easy insertion of the strap in the head. Type: T120R-TZ-BU-L1 item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 509311

Type: MCT120R PA66MP BU 100 ST
Sales unit: 100 pieces
Lieske Part No.: 688948

Einzelne Abschnitte durch Metallpigmente im gesamten Band lokalisierbar. Verwendbar im Rahmen des HACCP-Prozesses*. Hochwertige Qualitätslösung zur Reduzierung von Produktverunreinigungen. MCT Kabelbinder sind besonders geeignet für die Anwendung in der pharmazeutischen und chemischen Industrie sowie in der Lebensmittel- und Tierfutterproduktion. Die Kabelbinder eignen sich zum Verschließen von Transportbehältern, Gebinden und Säcken. Des Weiteren werden die MCT Kabelbinder zur Installation von Kabeln und Leitungen an Produktionsanlagen verwendet.
Sales unit: 80000 pieces
Lieske Part No.: 1357063

The cable tie of the MCT series were developed in collaboration with well-known international food manufacturers and can reduce product contamination by plastic sections. The 6 different sizes are made ??of a special polyamide compound with metal components. Through these metal pigments contained in the entire product, a detection of the whole cable ties, as well as of belt sections is possible. This is especially true if * is familiar to avoid contamination in the production process to the stringent HACCP system. The color, a bold blue, also allows for visual inspection quick and clear recognition.
Type: MCT18R PA66MP BU 100 ST

Sales unit: 100 pieces
Lieske Part No.: 471949

For high temperature applications from -55 °C to +240 °C. Internally toothed cable ties for a secure hold on the bundle. Closed fit on the cable bundle thanks to a recess in the head. Particularly easy to loop in with excellent holding power. Small space requirement thanks to the rounded head design. Combines the performance characteristics of a metal cable tie with the simple installation of a polyamide cable tie. Easy to process by hand or with tools (process-reliable). PEEK cable ties were developed for use in extreme environments. The high-performance material PEEK means that the cable ties can be used in environments with operating temperatures of up to +240 °C. PEEK cable ties can replace various metal solutions thanks to their high temperature resistance and help to save weight in the aviation or automotive industries. PEEK cable ties have also been used for some time in rail vehicle construction and the chemical industry. The very good chemical and radiation resistance extends the area of application of PEEK to include medical technology.
Sales unit: 100 pieces
Lieske Part No.: 1131174

High-performance plastic polyamide 11 UV-resistant (PA11W). The material is made from natural oils from the inedible castor fruit. Extremely resistant to chemicals such as zinc chloride and UV influences. Operating temperature is -40 °C to +105 °C. The Galvalok series is ideal for bundling and fastening solar cables to galvanized steel frames in coastal areas. Here, the salt in the air in combination with water on the galvanized steel frames forms a zinc chloride solution that can decompose conventional polyamide 6.6 more quickly.
Lieske Part No.: 707675

High-performance plastic polyamide 11 UV-resistant (PA11W). The material is made from natural oils from the inedible castor fruit. Extremely resistant to chemicals such as zinc chloride and UV influences. Operating temperature is -40 °C to +105 °C. The Galvalok series is ideal for bundling and fastening solar cables to galvanized steel frames in coastal areas. Here, the salt in the air in combination with water on the galvanized steel frames forms a zinc chloride solution that can decompose conventional polyamide 6.6 more quickly.
Sales unit: 100 pieces
Lieske Part No.: 826189

High-performance plastic polyamide 11 UV-resistant (PA11W). The material is made from natural oils from the inedible castor fruit. Extremely resistant to chemicals such as zinc chloride and UV influences. Operating temperature is -40 °C to +105 °C. The Galvalok series is ideal for bundling and fastening solar cables to galvanized steel frames in coastal areas. Here, the salt in the air in combination with water on the galvanized steel frames forms a zinc chloride solution that can decompose conventional polyamide 6.6 more quickly.
Sales unit: 100 pieces
Lieske Part No.: 2057350

MBT cable ties made of stainless steel SS316L (V4A). Permanent locking head. Forked band end for easy looping. Excellent chemical resistance. Corrosion and weather resistant. High temperature resistant. Non-flammable. Metal cable ties are ideal for all areas with high demands on holding power, durability and fire protection. MBT metal cable ties are used in the chemical industry, on oil platforms, as well as in shipbuilding, mining and rail vehicle construction. The MBT series is a guarantee of safety in lighting technology in stage and exhibition construction.
Sales unit: 100 pieces
Lieske Part No.: 2057111