2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 2058139

Fastening tie. 2-part with hose holder. Rotatable 360°. This internally toothed fastening tie makes it possible to attach the hose or cable to an existing cable harness. This product can be freely rotated 360° and can be installed flexibly.
Sales unit: 500 pieces
Lieske Part No.: 2058140

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 2058141

Fastening ties. 2-part with hose holder. Rotatable 360°. These internally toothed fastening straps offer the option of attaching a wire or hose to an existing wiring harness. With a full 360-degree rotation, the hose or cable can be oriented in any direction in relation to the main wiring harness.
Sales unit: 6000 pieces
Lieske Part No.: 2058145

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with thread. These fastening ties are used wherever efficient work combined with high holding forces is required. They can be used in control cabinet and vehicle construction, for example.
Sales unit: 100 pieces
Lieske Part No.: 1565692

2-teiliger Kabelbinder mit Coupler, vormontiert. Kopf des Binders kann in optimale Bündelposition gebracht werden. Auch für nachträgliche Montagen von Bündelgütern geeignet. Zur Parallelführung zweier Bündel, die um 90° zueinander drehbar sind. Die einfachste Art zwei Kabelbinder miteinander zu verbinden, um eine Parallelführung von Leitungen möglich zu machen. Der Coupler ist dabei so ausgelegt, dass jeder Kabelbinder um 90° verdrehbar ist. Dies gewährt eine hohe Flexibilität bei der späteren Montage. Das Verbindungsstück kann mit einem oder mit zwei Kabelbindern bestückt werden. So ermöglicht der Coupler auch eine nachträgliche Montage von Kabelbündeln.
Sales unit: 500 pieces
Lieske Part No.: 705709

Einteilige Befestigungsbinder mit Zellkautschuk-Dichtung. Einfache Montage, werkzeugfrei. Hoher Schutz vor eindringendem Staub bzw. Wasser durch Teller mit Zellkautschuk-Dichtung. Spreizanker verrasten hör- und fühlbar. Die Befestigungsbinder wurden hauptsächlich für die Automobilindustrie hergestellt. Dort werden sie insbesondere zur Befestigung von Kabelbäumen in Autotüren oder Heckklappen verwendet. Wir bieten eine Vielzahl von Plattenstärken und Lochgrößen für alle Arten von Anwendungen an. Die Dichtung schützt den Innenraum und die umliegenden Kabel unter anderem vor Spritzwasser.
Sales unit: 500 pieces
Lieske Part No.: 1295075

2-part cable tie with EdgeClip, pre-assembled. Easy assembly, no tools required. The head of the cable tie can be moved to the optimal bundling position. For edges of 1 - 2.5 mm or 1 - 3 mm. Rotatable cable tie for flexible cable routing. This combination of cable tie and Edge Clip is suitable wherever holes cannot be drilled or where an adhesive fails due to high temperatures. These solutions are widely used for fastening and bundling cables, lines and pipes, e.g. in the automotive, construction and electrical industries as well as in cable harness production.
Sales unit: 1000 pieces
Lieske Part No.: 2058136

2-part cable tie with coupler, pre-assembled. The head of the tie can be brought into the optimal bundle position. Also suitable for subsequent assembly of bundled goods. For parallel guidance of two bundles that can be rotated 90° to each other. The coupler is a connector for up to two cable ties that enables parallel cable routing. The cable tie holder is designed so that each cable tie can be flexibly rotated 90°. This ensures a high level of flexibility during subsequent assembly. The connector can be fitted with one or two cable ties. The coupler also enables subsequent assembly of bundles.
Sales unit: 500 pieces
Lieske Part No.: 2049028

2-teiliger Kabelbinder mit Fußteil, vormontiert. Kopf des Binders kann in optimale Bündelposition gebracht werden. Perfekter Formschluss am Bündelgut durch H-Design. Gute Alternative zu Metallschellen. Halten Vibrationen und Verschiebungskräften stand. Hohes Anziehdrehmoment durch Metall-Buchse. HDM-Halterungen werden vor allem im Transportsektor verwendet und können je nach Umgebung verschiedene Anwendungen finden. Im Automobilsektor werden diese Halterungen hauptsächlich zur Befestigung von Kabelsträngen verwendet. Dank ihrer hohen Hitze- und Bewegungsbeständigkeit werden die Kabelstränge sicher gehalten. Sie werden auch im Eisenbahnsektor verwendet, um Wellrohre und Kabelstränge zu halten. Auch im militärischen und maritimen Bereich können sie zur Führung von elektrischen Kabeln in Fahrzeugen eingesetzt werden. Dank ihrer vielen Eigenschaften können HDM-Halterungen in vielen Umgebungen eingesetzt werden.
Sales unit: 100 pieces
Lieske Part No.: 690243

2-part cable tie with slatted base, pre-assembled. The head of the tie can be moved to the optimal bundle position. Easy assembly, no tools required. Protects against dirt and dust penetration through plates. Various sheet thicknesses can be used with a single slatted base part. Also for blind holes with threads. The tie was developed primarily for fastening cable harnesses in the automotive industry. Due to its simple and user-friendly application, the fastening tie is also used in other industries, e.g. in aviation, switchgear and in the manufacture of household appliances.
Sales unit: 500 pieces
Lieske Part No.: 2058146

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Diese Befestigungsbinder finden überall dort Anwendung, wo rationelles Arbeiten verbunden mit hohen Haltekräften gefordert ist. Sie sind z. B. im Schaltschrank- und Fahrzeugbau einsetzbar.
Sales unit: 1000 pieces
Lieske Part No.: 705696

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1 - 3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, primarily in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 1237633

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. Type EC9, EC10, EC21 and EC22 for bundle diameters from 1 mm. For edges of 1-3 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip series is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries, as well as in cable harness production.
Sales unit: 500 pieces
Lieske Part No.: 2048214

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1 - 3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Familie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 705707

2-part cable tie with base part, pre-assembled. The head of the tie can be brought into the optimal bundle position. Perfect form fit on the bundled goods thanks to the H-design. Very robust design. Good alternative to metal clamps. Withstands vibrations and displacement forces. High tightening torque thanks to the metal bushing. Heavy-duty mounts are used by automobile and truck manufacturers, particularly on engine wiring harnesses. These parts are also used in other areas with difficult requirements.
Sales unit: 50 pieces
Lieske Part No.: 2058370

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 500 pieces
Lieske Part No.: 2058137

Rustproof stainless steel cable ties (316), equipped with RFID transponders. Particularly suitable for applications in harsh environments. With patented, non-removable locking head. Flexible, contactless data communication. Clear identification of objects through unique numbering. Faster data management compared to paper solutions. More precise documentation processes - prevention of human errors. Available as high frequency (HF/13.56 MHz) version and ultra high frequency (UHF/869 MHz) version. Rewritable. Signal color red as standard for better findability, black coating on request. RFID cable ties offer an innovative solution for clear and quick product identification. The cable ties made of stainless steel type 316 are equipped with a transponder and are ideal for all areas with high demands on holding power and durability in adverse environments. The numerous advantages of a cable tie are combined with RFID technology. This labeling solution is used primarily for securing, serializing, tracking and identifying products in the areas of asset management, electrical testing, inventory, rental and leasing services as well as maintenance and repair.
Sales unit: 50 pieces
Lieske Part No.: 1142227

2-part cable tie with blind hole clamp, pre-assembled. High extraction forces due to the all-round metal clamp. The head of the tie can be brought into the optimal bundle position. Easy assembly, no tools required. Plate protects against the ingress of dirt and dust. Suitable for blind holes with or without threads. These fastening ties are used wherever efficient work combined with high holding forces is required. Thanks to the all-round metal clamp, the blind hole clamp can be used for blind holes with and without threads. They are used in vehicle construction, shipbuilding and renewable energies.
Sales unit: 1000 pieces
Lieske Part No.: 2058138

2-teiliger Kabelbinder mit Lamellenfuß, vormontiert. Der Kopf des Binders kann in die optimale Bündelposition gebracht werden. Einfache Montage, werkzeugfrei. Schützt vor eindringendem Schmutz und Staub durch Teller. Diverse Blechdicken finden Verwendung mit einem einzigen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Einsetzbar z. B. im Schaltschrank- und Fahrzeugbau.
Sales unit: 5000 pieces
Lieske Part No.: 705670

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058128

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1 - 3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Familie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 3000 pieces
Lieske Part No.: 705714

Spring steel clamp with interlocking claws. For thin edges 0.5 - 2.5 mm. Small housings for limited installation space. 2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundling position. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used to bundle and attach cable harnesses and hoses, mainly in the automotive industry. These EdgeClips are used where installation space is limited. Possible areas of application in the automotive industry include taillights or mirrors.
Sales unit: 500 pieces
Lieske Part No.: 2058129

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1-3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Serie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 838330

2-teiliger Kabelbinder mit EdgeClip, vormontiert. Der Kopf des Binders kann in optimale Bündelposition gebracht werden. Typ EC9, EC10, EC21 und EC22 für Bündeldurchmesser ab 1 mm. Für Kanten von 1-3 mm. Elemente aus der EdgeClip-Serie sind eine sehr gute Alternative überall dort, wo Lochbohrungen und Schweißbolzen nicht realisierbar und Kleber aufgrund höherer Temperaturen nicht einsetzbar sind. Anwendung findet die EdgeClip-Serie zur Bündelung und Befestigung von Kabelbäumen und Schläuchen überwiegend in der Automobil-, Bau- und Elektroindustrie sowie in der Kabelbaumfertigung.
Sales unit: 100 pieces
Lieske Part No.: 838887

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be brought into the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive industry.
Sales unit: 500 pieces
Lieske Part No.: 2058147

2-part cable tie with EdgeClip, pre-assembled. The head of the tie can be moved to the optimal bundle position. For bundle diameters from 1 mm. For edges of 3 - 6 mm. Elements from the EdgeClip series are a very good alternative wherever holes and weld studs cannot be drilled and adhesives cannot be used due to higher temperatures. The EdgeClip family is used for bundling and fastening cable harnesses and hoses, mainly in the automotive, construction and electrical industries.
Sales unit: 500 pieces
Lieske Part No.: 2058133

Type: T50ROSEC19 PA66HS,PA66HIRHS BK 500 ST
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 838389

Type: T50ROSEC9-MC5-BK-D1
Sales unit: 4000 pc
Sales unit: 500 pieces
Lieske Part No.: 542786

Type: T50SOSFT5-MC5-BK-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 100152

Kopf des Einteilers nimmt montiert definierte Position ein. Einfache Montage, werkzeugfrei. Hohe Auszugs- und Haltekraft, auch bei Belastungen aus unterschiedlichen Richtungen. Teller schützt vor eindringendem Schmutz und Staub. Diverse Blechdicken finden Verwendung mit einem einzelnen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Versionen für Ovallöcher dienen der Verdrehsicherung. Der Binder wurde hauptsächlich für die Befestigung von Kabelbäumen in der Automobilindustrie entwickelt. Aufgrund seiner einfachen und benutzerfreundlichen Anwendung kommt der Befestigungsbinder auch in anderen Branchen zum Einsatz, z. B. in der Luftfahrt, bei Schaltanlagen und in der Herstellung von Haushaltsgeräten.
Sales unit: 1500 pieces
Lieske Part No.: 1570499

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. High pull-out and holding force, even when subjected to loads from different directions. Integrated plate protects against dirt and dust penetration. Various sheet thicknesses can be used with a single slatted base. Also for blind holes with thread. This fastening tie is used in car body construction, the electrical industry and in control cabinet construction, for example.
Sales unit: 500 pieces
Lieske Part No.: 667409

Kopf des Einteilers nimmt montiert definierte Position ein. Einfache Montage, werkzeugfrei. Hohe Auszugs- und Haltekraft, auch bei Belastungen aus unterschiedlichen Richtungen. Schützt vor eindringendem Schmutz und Staub durch integrierten Teller. Diverse Blechdicken finden Verwendung mit einem einzelnen Lamellen-Fußteil. Auch für Sacklochbohrungen mit Gewinde. Eingesetzt wird dieser Befestigungsbinder z. B. im Karosseriebau, in der Elektroindustrie und im Schaltschrankbau.
Sales unit: 500 pieces
Lieske Part No.: 705697

The head of the divider takes up a defined position when assembled. Easy assembly, no tools required. Bundled goods are guided very close to the bolt. Primarily developed for the automotive industry, these welding bolt holders are also used in all other areas where cables and lines need to be guided safely using welding or threaded bolts.
Sales unit: 500 pieces
Lieske Part No.: 2049030

Bases can be fixed with screws, cable ties or glue. Can be used with all sizes of HWClips. Various Helawrap clips in the right sizes are used to complete the Helawrap cable management system. The clips and mounting bases can be coupled together as desired and mounted either with screws or conveniently with an adhesive base.
Sales unit: 50 pieces
Lieske Part No.: 1343401

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 2000 pieces
Lieske Part No.: 1597340

Type: SNP2(E) POM NA 500 ST
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 332404

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 500 pieces
Lieske Part No.: 2054878

Type: SNP12(E)-POM-NA-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 134650

Type: SNP14(E)-POM-NA-D1
Sales unit: 500 pc
Sales unit: 500 pieces
Lieske Part No.: 399349

Type: SNP2 PA66GF13% BK 100 ST
Sales unit: 100 pc
Sales unit: 8000 pieces
Lieske Part No.: 459324

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 8000 pieces
Lieske Part No.: 1581131

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 3000 pieces
Lieske Part No.: 610409

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 2000 pieces
Lieske Part No.: 1581130

Detachable and reusable clamps. Self-locking. For process-safe installation: processing with tools recommended. Unlocking by pushing the wings apart from the side. For high operating temperatures: glass fiber reinforced PA66 material. Our Snapper series made of plastic can be used instead of metal pipe clamps. As a hose fastener, the Snapper's application ranges from use in the automotive and agricultural machinery sector to white goods, ventilation construction, pumps and hydraulics to medical technology.
Sales unit: 1000 pieces
Lieske Part No.: 955559

2-part fastening element consisting of a clamp and a retaining ring. Suitable for pre-assembly and prototype production. Simplifies maintenance work. Cables can be easily added or removed. The retaining ring is stretched over the clamp. Simple and quick cable fastening. Simple and versatile method for cable bundling and fastening. These clamps consist of two parts. A fastening base and an elastic tensioning element.
Sales unit: 100 pieces
Lieske Part No.: 175813

Type: ALU5-ALU-NA-C1
Sales unit: 100 pc
Sales unit: 100 pieces
Lieske Part No.: 722911

Simple and secure pipe or cable fastening. Can be combined with a chloroprene protection profile. Ideal for use in high-temperature areas. For applications that require the resilience of metal parts. Made from high-quality aluminum, these metal clamps offer flexibility and ensure permanent fastening in the most difficult environments. For additional protection of the bundled goods, clamps with a chloroprene protection profile are available. In addition, the profile offers electrical insulation and minimizes noise. The aluminum clamps are often used in caravan construction, the defense industry, rail vehicle construction and in the field of renewable energies.
Sales unit: 100 pieces
Lieske Part No.: 756769

Simple and secure pipe or cable fastening. Can be combined with a chloroprene protection profile. Ideal for use in high-temperature areas. For applications that require the resilience of metal parts. Made from high-quality aluminum, these metal clamps offer flexibility and ensure permanent fastening in the most difficult environments. For additional protection of the bundled goods, clamps with a chloroprene protection profile are available. In addition, the profile offers electrical insulation and minimizes noise. The aluminum clamps are often used in caravan construction, the defense industry, rail vehicle construction and in the field of renewable energies.
Sales unit: 100 pieces
Lieske Part No.: 634404

Simple and secure pipe or cable fastening. Can be combined with a chloroprene protection profile. Ideal for use in high-temperature areas. For applications that require the resilience of metal parts. Made from high-quality aluminum, these metal clamps offer flexibility and ensure permanent fastening in the most difficult environments. For additional protection of the bundled goods, clamps with a chloroprene protection profile are available. In addition, the profile offers electrical insulation and minimizes noise. The aluminum clamps are often used in caravan construction, the defense industry, rail vehicle construction and in the field of renewable energies.
Sales unit: 100 pieces
Lieske Part No.: 1581129