Buy Shrink Tubing

Shrink tubings are made of synthetic material and become very tight when exposed to heat. They isolate and protect from mechanical and electrical damage. A shrink tubing's diameter reaches from 1 to 1100 mm. The change in size when shrinking varies strongly depending on the material of the hose's synthetics. The shrinking proportion differs from 2:1 to 6:1. When it comes to certain seals, it can also be 10:1.

A hot glue on the inside is responsible for a good sealing. For best results, many manufacturers recommend a ratio of 4:5. A distinction of shrink tubings is made regarding their diameter, wall thickness and shrinking ratio.

Manufacturer no.	Description	Price	Anzahl Bestellen
125345	Cellpack SKH 10-4 - CELL shrink cap Heat shrink end caps SKH with adhesive, as pressure and moisture protection for cables, lines and pipes from 5 - 105 mm diameter. Sales unit: 10 pieces Lieske Part No.: 867697	30,10 EUR Graduated prices From pieces Price per pieces X 50 29,65 EUR 100 29,20 EUR 250 28,75 EUR 500 28,29 EUR
125365	Cellpack SEH3 35-15 (125365) Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables. Sales unit: 10 pieces Lieske Part No.: 1578892	241,76 EUR
125371	Cellpack SEH3 125-59 - CELL shrink spreader Sealing 3-finger distribution cap for plastic, rubber and paper insulated cables. Sales unit: 5 pieces Lieske Part No.: 786902	559,65 EUR Graduated prices From pieces Price per pieces X 6 551,26 EUR 12 542,86 EUR 24 534,47 EUR 36 526,07 EUR
125373	Cellpack SEH2 60-20 - Cell Pack 60 20 SEH2 shrink spreader 2x150 300qmm Sealing 2-finger distribution cap for plastic, rubber and paper insulated cables. Sales unit: 10 pieces Lieske Part No.: 923120	489,26 EUR Graduated prices From pieces Price per pieces X 4 481,92 EUR 8 474,58 EUR 12 467,24 EUR 16 459,90 EUR
125374	Cellpack SEH2 30-10 - Cell Pack 30 10 SEH2 shrink Spreader 2x2 5 25qmm Sealing 2-finger distribution cap for plastic, rubber and paper insulated cables. Sales unit: 20 pieces Lieske Part No.: 909598	464,51 EUR Graduated prices From pieces Price per pieces X 5 450,57 EUR 10 436,64 EUR 15 422,70 EUR 20 408,77 EUR
126665	Cellpack SMH5 120-240 - shrink joint 120 240qmm 1kV 126665 Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). Suitable for compression connectors on aluminum and copper cables. Lieske Part No.: 564805	135,65 EUR Graduated prices From pieces Price per pieces X 6 133,62 EUR 12 131,58 EUR 24 129,55 EUR 36 127,51 EUR
126672	Cellpack SMHC3 4-10 - shrink connection training sleeve 3x4 / 4 3x10 / 10qmm 126672 Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors. Sales unit: 20 pieces Lieske Part No.: 971551	937,53 EUR
126675	Cellpack SMHC3 50-95 - Cell pack shrink sleeve connection 3x50/50 3x95/95mmq Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors. Lieske Part No.: 913315	121,21 EUR Graduated prices From pieces Price per pieces X 10 119,39 EUR 25 117,57 EUR 50 115,76 EUR 75 113,94 EUR
126676	Cellpack SMHC3 120-240 - CELL shrink sleeve connection 3x120/120 3x240/240 Universally applicable for connecting plastic cables with concentric conductors and insulation made of PVC, PE and XLPE (e.g. N(A)YCY, N(A)YC(W)Y, GKN). Suitable for compression connectors. Lieske Part No.: 758306	176,48 EUR Graduated prices From pieces Price per pieces X 5 173,83 EUR 10 171,19 EUR 15 168,54 EUR 20 165,89 EUR
126745	Cellpack SMH5 35-95 - Cell pack shrink sleeve connection 5x35 5x95qmm Universally applicable for connecting plastic cables with insulation made of PVC, PE and VPE (e.g. N(A)YY, NYM, TT). Suitable for compression connectors on aluminum and copper cables. Lieske Part No.: 271269	64,46 EUR Graduated prices From pieces Price per pieces X 10 63,49 EUR 25 62,53 EUR 50 61,56 EUR 75 60,59 EUR
126892	Cellpack SR1F 6.4-3.2/m gg - SR1F 6 4 3 2 / gg shrink hose dünnw 6 4 3 2mm 300m 126892 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 300 meters Lieske Part No.: 961024	2.061,18 EUR
126897	Cellpack SR1F/6.4-3.2/weiß/ 300m (126897) Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR Sales unit: 300 meters Lieske Part No.: 490847	1.253,34 EUR
126900	Cellpack SR1F 9.5-4.8/m gg - SR1F 9 5 4 8 / gg shrink hose dünnw 9 5 4 8mm 150m 126900 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 150 meters Lieske Part No.: 961400	1.208,79 EUR
126903	Cellpack SR1F 9.5-4.8/m gl - SR1F 9 5 4 8 / gl shrink hose dünnw 9 5 4 8mm 150m 126903 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 150 meters Lieske Part No.: 961343	718,74 EUR
126908	Cellpack SR1F 12.7-6.4/m gg - SR1F 12 7 6 4 / gg shrink hose dünnw 12 7 6 4mm 100m 126 908 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 100 meters Lieske Part No.: 961171	867,24 EUR
126911	Cellpack SR1F/12.7-6.4/blau/100m (126911) Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR Sales unit: 100 meters Lieske Part No.: 490878	540,54 EUR
126913	Cellpack SR1F 12.7-6.4/m rt - SR1F 12 7 6 4 / rt shrink hose dünnw 12 7 6 4mm 100m 126913 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 100 meters Lieske Part No.: 961212	540,54 EUR
126917	Cellpack SR1F 19.1-9.5/m gg - SR1F 19 1 9 5 / gg shrink hose dünnw 19 1 9 5mm 50m 126917 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 961254	553,41 EUR
126919	Cellpack SR1F/19.1-9.5/blau/50m (126919) Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR Sales unit: 50 meters Lieske Part No.: 490880	343,53 EUR
126925	Cellpack SR1F 25.4-12.7/m gg - SR1F 25 4 12 7 / gg shrink hose dünnw 25 4 12 7mm 50m 126925 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 962958	896,94 EUR
126927	Cellpack SR1F 25.4-12.7/m bl - SR1F 25 4 12 7 / bl shrink hose dünnw 25 4 12 7mm 50m 126 927 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 962370	553,41 EUR
126933	Cellpack SR1F 38.1-19.1/m gg - SR1F 38 1 19 1 / gg shrink hose dünnw 38 1 19 1mm 50m 126933 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 963354	1.599,84 EUR
126934	Cellpack SR1F/38.1-19.1/transparent/50m (126934) Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 50 MTR Sales unit: 50 meters Lieske Part No.: 490889	896,94 EUR
126935	Cellpack SR1F 38.1-19.1/m bl - SR1F 38 1 19 1 / bl shrink hose dünnw 38 1 19 1mm 50m 126935 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 963317	896,94 EUR
126937	Cellpack SR1F 38.1-19.1/m rt (126937) The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 1315402	896,94 EUR
126962	Cellpack SR1F 3.2-1.6/m gg - SR1F 3 2 1 6 / gg shrink hose dünnw 3 2 1 6mm 300m 126962 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 300 meters Lieske Part No.: 962467	1.253,34 EUR
126966	Cellpack SR1F 3.2-1.6/m rt - SR1F 3 2 1 6 / rt shrink hose dünnw 3 2 1 6mm 300m 126966 The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 300 meters Lieske Part No.: 962640	855,36 EUR
126984	Cellpack SR1F3 3-1/m tr - SR1F3 3 1 / tr shrink hose dünnw 3 1mm 300 126 984 The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 300 meters Lieske Part No.: 963083	974,16 EUR
126988	Cellpack SR1F3/3-1/weiß/ 300m (126988) Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR Sales unit: 300 meters Lieske Part No.: 490908	974,16 EUR
126994	Cellpack SR1F3/6-2/weiß/ 300m (126994) Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 1 MTR Sales unit: 300 meters Lieske Part No.: 490886	1.514,70 EUR
126995	Cellpack SR1F3 9-3/m sw (126995) The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 150 meters Lieske Part No.: 1578753	810,81 EUR
126999	Cellpack SR1F3/9-3/weiß/ 150m (126999) Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 150 MTR Sales unit: 150 meters Lieske Part No.: 490890	852,39 EUR
127000	Cellpack 127000 - SR1F3 12 4 / sw shrink hose dünnw 12 4mm 100m The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 100 meters Lieske Part No.: 806193	625,68 EUR Graduated prices From pieces Price per meters X 50 616,29 EUR 100 606,91 EUR 250 597,52 EUR 500 588,14 EUR
127004	Cellpack SR1F3 12-4/m ws - SR1F3 12 4 / ws shrink hose dünnw 12 4mm 100m 127004 The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 100 meters Lieske Part No.: 964096	659,34 EUR
127005	Cellpack SR1F3 18-6/m sw (127005) The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 1316302	389,07 EUR
127014	Cellpack SR1F3 24-8/m ws - SR1F3 24 8 / ws shrink hose dünnw 24 8mm 50m 127014 The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 50 meters Lieske Part No.: 963040	658,35 EUR
127031	Cellpack SB 1.6-0.8 rt 15m - SB 1 6 0 8 red 15m shrink hose dispenser box 1 6 0 8mm 15m 127031 The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 961665	26,79 EUR
127035	Cellpack SB/2.4-1.2/TC/15m (127035) Die Warmschrumpfschläuche vom Typ SB 2:1 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz. Verkaufseinheit: 5 ST. Lieske Part No.: 2144086	27,62 EUR
127043	Cellpack SB 3.2-1.6 tr 15m - CELL shrink tubing SB / 3 2 1 6 / thin 15m combo boxes The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 295688	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127044	Cellpack SB 3.2-1.6 bl 15m - CELL shrink tubing 3 2 1 6mm / 15 blue The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 5 pieces Lieske Part No.: 169668	133,95 EUR Graduated prices From pieces Price per pieces X 15 131,94 EUR 30 129,93 EUR 70 127,92 EUR 100 125,91 EUR
127045	Cellpack SB 3.2-1.6 ge 15m (127045) The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 634076	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127046	Cellpack SB 3.2-1.6 rt 15m - CELL shrink tubing 3 2 1 6mm / 15 red The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 941365	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127047	Cellpack SB 3.2-1.6 ws 15m - The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 391240	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127049	Cellpack SB4,8-2,4/SW - Cell Pack SB/4 8 2 4/SW shrink tubing thin wall black 10m dispenser box The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 5 pieces Lieske Part No.: 956376	118,90 EUR Graduated prices From pieces Price per pieces X 15 115,33 EUR 30 111,77 EUR 70 108,20 EUR 100 104,63 EUR
127051	Cellpack SB/4,8-2,4/TRA - CELL shrink tubing SB / 4 8 2 4 / TRA thin 10m combo boxes The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 510156	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127052	Cellpack SB 4.8-2.4 bl 10m - CELL shrink tubing 4 8 2 4mm / 10 blue The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 5 pieces Lieske Part No.: 211362	133,95 EUR Graduated prices From pieces Price per pieces X 15 131,94 EUR 30 129,93 EUR 70 127,92 EUR 100 125,91 EUR
127053	Cellpack SB 4.8-2.4 ge 10m - CELL SB 4 8 2 4 10m ge shrink tubing 4 8 2 4mm / 10 yellow The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 583104	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127054	Cellpack SB 4.8-2.4 rt 10m (127054) The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 490363	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127055	Cellpack SB 4.8-2.4 ws 10m - CELL shrink tubing 4 8 2 4mm / 10m wh The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Lieske Part No.: 500605	26,79 EUR Graduated prices From pieces Price per pieces X 15 26,39 EUR 30 25,99 EUR 70 25,58 EUR 100 25,18 EUR
127057	Cellpack SB/6,4-3,2/SW - Cell Pack SB/6 4 3 2/SW shrink tubing thin wall 10m combo boxes The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection. Sales unit: 5 pieces Lieske Part No.: 131337	118,90 EUR Graduated prices From pieces Price per pieces X 15 115,33 EUR 30 111,77 EUR 70 108,20 EUR 100 104,63 EUR

Shrink tubings are mainly being used to protect cables underground. They protect from moisture getting in.

We also have shrink tubings for special purposes in our product range and can deliver any amount you require. Whether you buy by the meter on a coil, whether you need black, colored or transparent. We have the solution for almost any purpose.

We hope you enjoy browsing our product category and are always happy to answer all the questions you might have. If you can't find what you are looking for, we gladly try to get it for you.