Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem
halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen
Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000
Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 498636

Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem
halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen
Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000
Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 498635

Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem
halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen
Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000
Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 3 ST.
Sales unit: 3 pieces
Lieske Part No.: 498634

HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing
made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial
applications. It is also suitable for cable marking and identification applications. HSR 3000
tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 15 pieces
Lieske Part No.: 1312863

HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing
made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial
applications. It is also suitable for cable marking and identification applications. HSR 3000
tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 3 pieces
Lieske Part No.: 1312837

HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing
made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial
applications. It is also suitable for cable marking and identification applications. HSR 3000
tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 3 pieces
Lieske Part No.: 1313385

3MT Heat Shrink Tubing GTI is a RoHS flexible heat shrink tubing range. The tubes have a flame retardant wall made of cross-linked polyolefin. They provide reliable performance for electrical splices, joints and connections up to 600V. GTI heat shrink tubing is available in many different colors and sizes with a shrink ratio of 2:1. This GTI heat shrink tubing kit is supplied in a convenient sorting box (size 270mm x 160mm x 60mm).
3MT Heat Shrink Tubing GTI is color coded for quick and easy wire identification. This split-resistant, flame retardant tubing is used as a shrink fit as well as electrical insulation over cable splices or terminations. The tubing with a 2:1 expansion ratio is mechanically tough, easily markable and resists cold flow. The tubing is ideal for lightweight harness covering, fire resistant covering, cable marking, cable bundling and component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Lieske Part No.: 1318835

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 10 pieces
Lieske Part No.: 1318834

Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 502328

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 10 pieces
Lieske Part No.: 1318704

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 5 pieces
Lieske Part No.: 1563503

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 5 pieces
Lieske Part No.: 1318832

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318818

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318823

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318822

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 2 pieces
Lieske Part No.: 1318821

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 2 pieces
Lieske Part No.: 1318820

Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 2 ST.
Sales unit: 2 pieces
Lieske Part No.: 502329

Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 2 ST.
Sales unit: 2 pieces
Lieske Part No.: 502331

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318676

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318833

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318633

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318646

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1318645

Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift.
Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 502334

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 1563215

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 200 pieces
Lieske Part No.: 1318644

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 1235353

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Lieske Part No.: 1318642

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Lieske Part No.: 1318641

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 15 pieces
Lieske Part No.: 1331213

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 15 pieces
Lieske Part No.: 1331212

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 8 pieces
Lieske Part No.: 1331211

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 3 pieces
Lieske Part No.: 1331210

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Sales unit: 2 pieces
Lieske Part No.: 1331209

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1331193

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330916

Robust und vielseitig - der dickwandige, halogenfreie Warmschrumpfschlauch mit Schmelzkleber.
Bei dem Warmschrumpfschlauch HDT-AN handelt es sich um einen dickwandigen, halogenfreien Warmschrumpfschlauch aus modifiziertem, strahlenvernetzten Polyolefin. Er eignet sich zur Verwendung an allen Kunststoff- und Massekabeln sowohl für Verlegungen im Innenraum als auch für Freiluft- und Erdverlegungen. Dabei dient er der Isolation und Abdichtung von Verbindungen jeglicher Art, insbesondere auch als Außenschlauch für Steuerleitungsgarnituren. Zur besseren Versiegelung verfügt er über eine Klebstoffbeschichtung auf der Innenwand. Der äußerst alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Seine Schrumpfrate beträgt vier zu eins und er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Er ist nicht selbstverlöschend. Verkaufseinheit: 1 ST.
Lieske Part No.: 507835

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330915

Robust and versatile - the thick-walled, halogen-free heat shrink tubing with hot melt adhesive.
The HDT-AN heat shrink tubing is a thick-walled, halogen-free heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for use on all plastic and ground cables for both indoor and outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range from -55 °C to +130 °C. It is not self-extinguishing.
Lieske Part No.: 1330914

Diese einfach montierbaren trennbaren Steckendverschlüsse sind für den Einsatz im Innenbereich bei mit Draht abgeschirmten, nicht armierten isolierten Polymerkabeln mit bis zu 24kV vorgesehen. Der trennbare Steckendverschluss dient dazu, eine Verbindung zwischen dem Kabel und der Schaltanlage, dem Transformator und anderen Anlagen herzustellen.
Die Produkte sind aus hochwertigem EPDM geformt und werden in Packungen mit Materialien für drei Phasen geliefert. Im Lieferumfang sind dabei eine Komponente zur Belastungskontrolle, ein Erdungsset, ein mechanischer Kabelschuh sowie die Montageanleitung enthalten. Die geraden, Winkel- und T-Steckendverschlüsse decken eine große Bandbreite an Kabelquerschnitten ab. Alle Sets wurden einer vollständigen Typprüfung gemäß Cenelec HD 629.1 (DIN VDE 0278) unterzogen. Verkaufseinheit: 1 ST.
Lieske Part No.: 704088

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 25 pieces
Lieske Part No.: 2021920

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 25 pieces
Lieske Part No.: 2109909

HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free range of heat shrink tubing that provides reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 15 pieces
Lieske Part No.: 2021918

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 15 pieces
Lieske Part No.: 2021919

HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free range of heat shrink tubing that provides reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, in particular as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 10 pieces
Lieske Part No.: 2109910

The 3MT HDT-A heat shrink tubing is a rigid, thick-walled and halogen-free heat shrink tubing range that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. HDT-A heat shrink tubing has a flame-retardant, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The 3MT HDT-A heat shrink tubing is a thick-walled heat shrink tubing made of modified, radiation-cross-linked polyolefin. It is suitable for use on all plastic and ground cables for both outdoor and underground installations. It is used to insulate and seal connections of all kinds, especially as an outer tube for control cable sets. It has an adhesive coating on the inner wall for better sealing. The extremely age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrinkage rate is four to one and it can be used in a temperature range of -55 °C to +130 °C. It is self-extinguishing and complies with the test standard Lloyds Register of Shipping MIL-I-23053/15.
Sales unit: 5 pieces
Lieske Part No.: 2021921

Die Warmschrumpfschläuche HDT-A sind eine starre, dickwandige und halogenfreie Schrumpfschlauch-Reihe, die für zuverlässige Leistung bei elektrischen Spleißen, Verbindungen und Abschlüssen bis zu 1,0 kV sowie für mechanischen und Umweltschutz sorgt. HDT-A Schrumpfschläuche verfügen über eine flammhemmende, vernetzte Polyolefin-Außenwand und eine werkseitig aufgebrachte Klebstoffschicht auf der Innenseite.
Bei dem Warmschrumpfschlauch HDT-A handelt es sich um einen dickwandigen Warmschrumpfschlauch aus modifiziertem, strahlenvernetzten Polyolefin. Er eignet sich zur Verwendung an allen Kunststoff- und Massekabeln sowohl für Freiluft- als auch Erdverlegungen. Dabei dient er der Isolation und Abdichtung von Verbindungen jeglicher Art, insbesondere auch als Außenschlauch für Steuerleitungsgarnituren. Zur besseren Versiegelung verfügt er über eine Klebstoffbeschichtung auf der Innenwand. Der äußerst alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Seine Schrumpfrate beträgt vier zu eins und er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Er ist selbstverlöschend und entspricht der Prüfnorm Lloyds Register of Shipping MIL-I-23053/15. Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 493483

Warmschrumpfschläuche MDT-A ist eine mittelwandige Schrumpfschlauch-Reihe mit Heißschmelzkleber, das für zuverlässige Leistung bei elektrischen Spleißen, Verbindungen und Abschlüssen bis zu 1,0 kV sowie für mechanischen und Umweltschutz sorgt. MDT-A Schrumpfschläuche haben eine halogenfreie, vernetzte Polyolefin-Außenwand und eine werkseitig aufgebrachte Klebeschicht auf der Innenseite.
Bei dem Warmschrumpfschlauch MDT-A handelt es sich um einen halogenfreien, mittelwandigen Warmschrumpfschlauch aus strahlenvernetzten Polyolefin mit einer Schmelzkleberbeschichtung. Der Schmelzkleber dringt in alle Unebenheiten und Hohlräume ein und verhindert ein Eindringen von Feuchtigkeit. Der Warmschrumpfschlauch MDT-A eignet sich zur Isolierung von Kunststoff- und Massekabeln bis 0,6/1kV sowohl für die Verlegung in Freiluft und im Erdreich. Der alterungsbeständige Warmschrumpfschlauch ist UV-beständig und resistent gegen viele chemische Einflüsse. Er ist einsetzbar in einem Temperaturbereich von -55 °C bis +130 °C. Durch seine hohe Schrumpfrate von 4,5 zu eins können Sie große Durchmessersprünge mit nur einem Schlauch erfassen. Der Warmschrumpfschlauch MDT-A erfüllt technische Anforderungen nach IEC 60684 und ist zugelassen nach Lloyds Register of Shipping , Zertifikat 95/30032(E5). Er ist halogenfrei und RoHS-konform. Verkaufseinheit: 25 ST.
Sales unit: 25 pieces
Lieske Part No.: 838382

Robust und vielseitig - der dünnwandige Warmschrumpfschlauch ohne Schmelzkleber in der praktischen Spenderbox.
Bei dem Warmschrumpfschlauch HSR handelt es sich um einen dünnwandigen Warmschrumpfschlauch aus modifiziertem, strahlenvernetztem Polyolefin. Er ist für vielfältige Einsatzmöglichkeiten geeignet, insbesondere zur elektrischen Isolation und Kennzeichnung von Verbindungen. Der Warmschrumpfschlauch ist äußerst alterungsbeständig und bleibt dauerhaft hochflexibel. Seine Schrumpfrate beträgt zwei zu eins. Er ist selbstverlöschend und einsetzbar in einem Temperaturbereich von -55 °C bis +135 °C. Die mitgelieferte Spenderbox ermöglicht eine effiziente Lagerung und Handhabung, da Sie den Schlauch leicht auf die ideale Länge kürzen können. Verkaufseinheit: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 832587