GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 271131

GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe.
GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant.
Sales unit: 20 pieces
Lieske Part No.: 988142

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 10 pieces
Lieske Part No.: 234099

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 3 pieces
Lieske Part No.: 972763

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 3 pieces
Lieske Part No.: 734621

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Sales unit: 2 pieces
Lieske Part No.: 673181

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Lieske Part No.: 336012

MDT-A heat shrink tubing is a medium-walled heat shrink tubing range with hot melt adhesive that ensures reliable performance for electrical splices, connections and terminations up to 1.0 kV as well as mechanical and environmental protection. MDT-A heat shrink tubing has a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tubing made of radiation-cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all uneven surfaces and cavities and prevents moisture from penetrating. MDT-A heat shrink tubing is suitable for insulating plastic and ground cables up to 0.6/1 kV for both outdoor and underground installation. The age-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range from -55 °C to +130 °C. Thanks to its high shrink ratio of 4.5 to one, you can accommodate large diameter changes with just one tube. The MDT-A heat shrink tubing meets the technical requirements of IEC 60684 and is approved according to Lloyds Register of Shipping, certificate 95/30032(E5). It is halogen-free and RoHS compliant.
Lieske Part No.: 492703

The 3MT 91-AH is a heat shrink connection kit for crimp connectors designed for low voltages. It is suitable for 4 or 5 core, unshielded and unarmored insulated low voltage plastic cables up to 0.6/1 kV (according to HD 603 and IEC 60502-1). The cable cross section range is 5 x 1.5 to 5 x 6 mm². RoHS compliant, halogen free. Good electrical insulation and resistance to moisture, mechanical stress, chemicals and UV radiation.
The 3MT 91-AH is a heat shrink connection kit for crimp connectors designed for low voltages. It is suitable for 4 or 5 core, unshielded and unarmored insulated low voltage plastic cables up to 0.6/1 kV (according to HD 603 and IEC 60502-1). Shrink ratio of up to 4.5:1, minimum shrink temperature of 135 °C, operating temperature range of -55 °C to 130 °C. The 91-AH 20-5N is RoHS compliant, halogen free and offers excellent waterproof moisture sealing and protection against mechanical impacts. It has outstanding electrical insulation and good resistance to UV radiation, alkaline earths and chemicals. Applications include electrical insulation and mechanical protection of crimp connectors. The 91-AH is suitable for indoor and outdoor use in underground and underwater installations. 91-AH is available in black color and in sizes designed for a cable cross-section range of 5 x 1.5 to 5 x 6 mm². Standard packaging as a set. Approvals: Type tested according to DIN EN 50393, Table 3
Sales unit: 3 pieces
Lieske Part No.: 810903

The EC Series cold shrink cable end caps are closed tubular rubber sleeves that are pre-stretched at the factory and fitted with a removable support coil. When positioned over the end of a cable, pipe or other cylindrical object, the support coil is pulled out, creating a reliable seal against environmental influences. Four different end caps are available to accommodate a wide range of diameters (from 11.7 mm to 84.3 mm).
The EC Series cold shrink cable end caps have good resistance to abrasion, water, fungi, acids, alkalis and ozone, ensuring a long service life. Installation does not require any tools or adhesive tape/mastic.
Sales unit: 10 pieces
Lieske Part No.: 783436

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 393451

The 3MT 91-AH is a heat shrink connection set for crimp connectors designed for low voltages. It is suitable for 4- or 5-core, unshielded and unarmored insulated low-voltage plastic cables with up to 0.6/1 kV (according to HD 603 and IEC 60502-1). The cable cross-section range is 5 x 1.5 to 5 x 6 mm². RoHS compliant, halogen-free. Good electrical insulation and resistance to moisture, mechanical stress, chemicals and UV radiation.
The 3MT heat shrink connection set of the 91-AHSC series with screw connectors enables a simple, quick and secure cable connection and is suitable for all common plastic cables with PVC or XLPE insulation in low voltage. You can use it both indoors and outdoors and for underground installation. Due to its high shrinkage rate, it covers a large cross-section range, which is why only a few sizes are needed for a large number of connections. The connection set is extremely resistant to aging and chemicals and has very good mechanical strength. A set contains a thick-walled outer tube, four or five inner tubes, the same number of screw connectors, a hexagon wrench and emery cloth. The screw connectors are suitable for copper and aluminum conductors and do not require any special tools.
Lieske Part No.: 643982

Heat shrink tubing made of self-extinguishing polyolefin with hot melt adhesive coating. For ageing, UV and moisture resistant insulation of plastic and ground cables and as an outer tube for control cable sets. The diameter before shrinking is 19 mm and after shrinking 6 mm.
Lieske Part No.: 588102

Shrink sleeve Pliofine SAM 1.6
Sales unit: 150 meters
Lieske Part No.: 458980

Shrink sleeve Pliofine SAM 1.6 (1.22m)
Lieske Part No.: 458986

Shrink sleeve Pliofine SAM 6.4
Sales unit: 75 meters
Lieske Part No.: 458995

Shrink sleeve Pliofine SAM 9.5
Sales unit: 75 meters
Lieske Part No.: 459021

Shrink sleeve Pliofine SAM 12.7
Sales unit: 50 meters
Lieske Part No.: 459047

Shrink sleeve Pliofine SAM 16.0
Sales unit: 50 meters
Lieske Part No.: 459050

Shrink wrap Pliofine SAM 32.0 (1.22m)
Lieske Part No.: 459060

Shrink tube Pliofine SAM 1.6 Box (17m)
Lieske Part No.: 459073

Shrink tube Pliofine SAM 2.4 Box (15m)
Lieske Part No.: 459078

Shrink tube Pliofine SAM 3.2 Box (15m)
Lieske Part No.: 459083

Shrink tube Pliofine SAM 4.8 Box (12m)
Lieske Part No.: 459123

Shrink tube Pliofine SAM 6.4 Box (12m)
Lieske Part No.: 459127

Shrink tube Pliofine SAM 9.5 Box (8m)
Lieske Part No.: 459156

Shrink tube Pliofine SAM 12.7 Box (8m)
Lieske Part No.: 459159

Shrink tube Pliofine SAM 16.0 Box (6m)
Lieske Part No.: 459174

Shrink tube Pliofine SAM 19.0 Box (5m)
Lieske Part No.: 459183

Shrink tube Pliofine SAM 25.4 Box (5m)
Lieske Part No.: 459214

Heat shrink tubing Pliofine B-95 Box (8m)
Lieske Part No.: 460343

Schrumpfschlauch Pliofine B-160 Box (6m)
Lieske Part No.: 499367

Shrink tubing Pliofine B-EX 120
Sales unit: 150 meters
Lieske Part No.: 460484

Shrink tubing Pliofine B-EX 160
Sales unit: 150 meters
Lieske Part No.: 460502

Schrumpfschlauch Pliofine B-EX 240
Sales unit: 150 meters
Lieske Part No.: 507436

Shrink tubing Pliofine B-EX 240
Sales unit: 150 meters
Lieske Part No.: 460514

Shrink tubing Pliofine B-EX 320
Sales unit: 150 meters
Lieske Part No.: 460546

Schrumpfschlauch Pliofine B-EX 480
Sales unit: 75 meters
Lieske Part No.: 499379

Shrink tubing Pliofine B-EX 480
Sales unit: 75 meters
Lieske Part No.: 557172

Schrumpfschlauch Pliofine B-EX 640
Sales unit: 75 meters
Lieske Part No.: 507437

Shrink tubing Pliofine B-EX 640
Sales unit: 75 meters
Lieske Part No.: 460570

Shrink tubing Pliofine B-EX 950
Sales unit: 75 meters
Lieske Part No.: 460572

Schrumpfschlauch Pliofine B-EX 1270
Sales unit: 50 meters
Lieske Part No.: 499380

Schrumpfschlauch Pliofine B-EX 1270
Sales unit: 50 meters
Lieske Part No.: 499381

Shrink tubing Pliofine B-EX 1270
Sales unit: 50 meters
Lieske Part No.: 460608

Shrink tubing Pliofine B-EX 1900
Sales unit: 30 meters
Lieske Part No.: 506715

Schrumpfschlauch Pliofine B-EX 1900
Sales unit: 30 meters
Lieske Part No.: 499384

Schrumpfschlauch Pliofine B-EX 1900
Sales unit: 30 meters
Lieske Part No.: 507458

Shrink tubing Pliofine B-EX 1900
Sales unit: 50 meters
Lieske Part No.: 460616

Shrink tubing Pliofine B-EX 2540
Sales unit: 30 meters
Lieske Part No.: 507398