Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay
|
1.553,96 EUR |
|||||||||||
|
( 1.849,21 EUR incl. VAT ) ≈ £1,300.66 | ≈ $1,707.80 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1001875 | ||||||||||
| Mfg Part No: | 0061900 | ||||||||||
| UPC/EAN: | 4030641619008 | ||||||||||
| Weight: | 2.62 kg | ||||||||||
| Type: | GB9034 100A AC50/60HZ 230V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0061900:
Applications
The motor brake device is designed for industrial applications where fast and reliable braking is required. It is particularly used in machines that must not come to a stop by free run for safety reasons. The integrated automatic standstill monitoring ensures that the braking process ends either after the set braking time has elapsed or upon detection of motor standstill. In standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time. This enables safe fault detection and response during operation.
Functions and equipment in detail
The device features integrated temperature monitoring, which detects overheating of the motor or heatsink and responds accordingly. The braking function is activated via an external brake contactor, which is controlled via terminals 1/2. The time coordination between switching off the motor contactor and switching on the brake contactor ensures that short-term induction voltages do not damage the power section. The supply voltage is connected to terminals L1–L2, where the interlock contact for the motor contactor closes. The ready LED indicates that the supply voltage is present and the device is operational.
Technology explained simply
Direct current braking is achieved via single-phase rectification, allowing current to flow through the stator winding of the motor and generating a magnetic braking force. The braking time and braking current are adjustable to adapt the braking force to the specific requirements of the drive. The automatic standstill monitoring monitors the motor status and switches off the braking current as soon as the motor stops. This prevents unnecessary energy losses and reduces thermal stress. The width of the device is 110 mm, enabling compact installation in enclosures. The device complies with the standard IEC/EN 60947-4-2 and carries the UKCA mark, confirming conformity with applicable safety requirements.
Compatibility and accessories
The motor brake device is suitable for all asynchronous motors and can be integrated into existing installations. Terminal designations include, among others, the supply voltage (L1–L2), motor connections (U, V, W), protective earth (PE), as well as contacts for interlocking, braking current, and fault signaling. Optional features such as star-delta starting, thermistor motor protection, or a wide voltage range (200–690 V) can be integrated, but are not part of this variant.
Mounting and installation
Mounting is carried out in an enclosure, taking into account the width of 110 mm. The connection terminals are clearly labeled, with the supply voltage connected to L1–L2, the motor to U–V–W, and the external brake contactor to 1–2. The interlock contacts (8–9) ensure that the motor contactor can only be operated again after the braking current has been switched off. The LED indicators (LED 1, LED 2, LED 3) indicate the operating status, with LED 2 showing the current setpoint and LED 3 lighting up when braking current is active. The functions are configurable via terminals Z1–Z4, Z1–X3, and 33–34 for braking interruption, second braking time, and fault signaling.
Advantages in operation
The device offers higher safety through shorter coast-down times and prevents unwanted movements at standstill. It is wear-free and maintenance-free, reducing operating costs. Simple integration into existing installations and adjustable parameters enable flexible use. The automatic standstill monitoring and alarm output ensure reliable fault detection. Conformity with IEC/EN 60947-4-2 and the UKCA mark guarantee compliance with relevant safety and quality standards.
| Technical data | |
| Braking current adjustable up to max. | 600 A |
| Braking time adjustable up to max. | 320 s |
| Width | 110 mm |
| Type | GB 9034 |
| Automatic standstill monitoring | |
| External brake contactor required | |
| Signalling output | |
| Temperature monitoring | |
| Variant | |
| Auxiliary voltage | Without |
| Braking current | 100 A |
| Nominal voltage | AC 230 V |
| Approvals and Markings | UKCA |
Questions & answers
What is the delivery time of Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay?
The article Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0061900 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay always at the best possible price. We can give you a discount of 2% on Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Dold 0061900 GB9034 100A AC50/60Hz 230V motor brake relay we can offer you a price of 1.484,03 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

