Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A
|
235,40 EUR |
|||||||||||
|
( 280,13 EUR incl. VAT ) ≈ £197.03 | ≈ $258.70 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1001493 | ||||||||||
| Mfg Part No: | 0061573 | ||||||||||
| UPC/EAN: | 4030641615734 | ||||||||||
| Weight: | 1.1 kg | ||||||||||
| Type: | BF9250.91/042 UH=AC/DC24V DC0-10V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0061573:
Applications include industrial process control, particularly in manufacturing, packaging technology, and drying technology, where precise temperature control is required. The device is designed for ohmic loads such as heating strips, heating ovens, or infrared lamps, and is suitable for operating voltages up to AC 480 V and load currents up to AC 50 A. The rated load voltage for this type is AC 24–115 V at a load current of AC 25 A. The auxiliary voltage is AC/DC 24 V, with a current consumption of less than 26 mA.
Functions and equipment in detail include an integrated temperature protection function for the power semiconductor, which indicates an overtemperature condition via a red LED and ensures safe operation. The varistor protection circuit protects the device against voltage surges. The LED indicators signal the operating status: green LED for power supply, yellow LED for output status, and red LED for faults such as synchronization errors, control input errors, or overtemperature. Some messages are latched, with the overtemperature message only resettable by briefly switching off the power supply.
Technology explained simply is based on pulse packet control, where the load is switched on in short, controlled pulses to control average power. The self-optimization dynamically adjusts the pulse distribution to minimize cycle times and enable faster response to load changes. The zero-crossing detection ensures the switch only operates at the zero crossing of the mains voltage, increasing lifespan and reducing interference. The output control resolution is 5 %, sufficient for fine control. The residual current in the off state is 1.0 mA, typical for semiconductor contactors.
Compatibility and accessories refer to use with DIN rail (35 mm), with the width varying according to rated current: 22.5 mm for 10 A, 45 mm for 25 A, and 90 mm for 50 A. The device is compliant with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 and carries the UL-listed C/US approval, enabling use in North America. The control inputs are flexible and can also be operated inverted, which may be necessary for certain control systems.
Mounting and installation is done by clipping onto a DIN rail. Recommended clearances are 20 mm above and below the cable duct and 10 mm to the right and left to ensure sufficient cooling. The operating temperature range is 0 °C to 40 °C, with current derating at higher temperatures (e.g. 0.4 A/°C above 40 °C for 25 A). Maximum relative humidity is 75 % without condensation.
Operational advantages include noiseless and fast switching, high lifespan due to semiconductor technology, and precise temperature control. Integrated protection functions such as temperature protection and varistor protection increase reliability. The LED indicators enable quick fault diagnosis. The device is designed for continuous operation and is suitable for industrial applications with high demands on stability and accuracy.
| Technical data | |
| Analog Input Control | 4 - 20 mA |
| Approvals | UL |
| Load current up to | 50 A |
| Load voltage up to | AC 480 V |
| Number of poles | 1-pole |
| Width | 22,5 mm, 45 mm, 90 mm |
| Type | BF 9250/0_2 |
| Temperature monitoring | |
| Variant | |
| Auxiliary voltage | AC/DC 24 V |
| Contact equipping | without signal contact |
| Control input | DC 0 - 10 V |
| Load current | AC 25 A |
| Load voltage | AC 24 - 115 V |
| Semiconductor output | 1-pole |
| Approvals and Markings | UL-listed C/US |
| Variant | Self optimising, to achieve as short as possible control periods, suitable for infrared lamps |
Questions & answers
What is the delivery time of Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A?
The article Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0061573 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A always at the best possible price. We can give you a discount of 2% on Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0061573 BF9250.91/042 UH=AC/DC24V DC0-10V semiconductor contactor AC24-115V AC25A we can offer you a price of 224,81 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

