Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device

Your rating:
Average rating
product review for Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device
( 0 / 5 ) 0 ratings
Dold 0059710
This image may differ from the desired article.
614,63 EUR
( 731,41 EUR incl. VAT )
≈ £514.45  |  ≈ $675.48
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device
Datasheet:file_download Download
Lieske Part No.:1002146
Mfg Part No: 0059710
UPC/EAN: 4030641597108
Weight:1 kg
Type:GF9016 3AC50/60HZ 400V 15KW
Graduated prices net
From piecesPrice per pieces
3586,97 EUR
6559,31 EUR
9531,65 EUR
12504,00 EUR

Product information for Dold 0059710:

The soft starter device GF 9016 from Dold is an electronic control device for smooth start-up and shut-down of three-phase asynchronous motors. It serves to reduce mechanical stress in the drive system and relieve the supplying network by reducing inrush currents. The device is designed for a supply/motor voltage of 3AC 400 V and supports motor powers up to 22 kW, with the variant described here designed for a rated power of 15 kW. The width is 45 mm, enabling space-saving installation in enclosures.

Soft start and soft stop function
The device achieves a smooth start-up through phase-cut control using power semiconductors (thyristors). Two motor phases are controlled, causing the currents and motor torque to increase gradually. This prevents jerky acceleration and protects drive components such as gearboxes, belts or chains from mechanical wear. After start-up, the circuit is bridged via internal relay contacts to minimize power losses in the device. The soft stop function extends the natural coast-down time of the motor to avoid abrupt stopping and associated counter-torques.

Functions and equipment in detail
The device offers separate adjustment options for start-up and stop time as well as for start-up voltage. Optionally, a kick-start function can be activated to support the start-up process. Control is performed without auxiliary voltage, simplifying installation. The W3 circuit is possible, enabling flexible integration into existing systems. An alarm output is integrated to relay operating states and faults to external systems.

Technology explained clearly
The control is based on phase-cut control, where the voltage to two motor phases is controlled while the third phase remains directly connected. This leads to controlled current increase and uniform torque build-up. The integrated network monitoring and temperature monitoring ensure safe operation. In case of faults, a yellow LED blinks at a specific frequency indicating the fault code – for example, supply voltage fault, overload or defects in the power semiconductors. A green LED indicates the ready-to-operate state.

Compatibility and accessories
The device is designed for three-phase asynchronous motors with a rated voltage of 400 V and can be used in systems with gearbox, belt or chain drives. Typical applications include conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines and door drives. Conformity with the standard IEC/EN 60947-4-2 ensures compliance with relevant safety and functional requirements.

Mounting and installation
Mounting is done in standard enclosures. The width of 45 mm allows for compact placement. The connection terminals are clearly labeled: L1, L2, L3 for supply voltage, T1, T2, T3 for motor voltage. Signal inputs and outputs (X1 to X8) serve for control and status indication. Terminal designations are detailed in the datasheet.

Advantages in operation
Through smooth start-up and shut-down, mechanical wear on motors and drive components is reduced, increasing service life. The relief of the network through reduced inrush currents reduces the load on the supply infrastructure. Simple installation without auxiliary voltage and compact design facilitate installation in existing systems. Integrated fault diagnosis via LED indicators enables quick fault resolution.

Approvals and markings
The device carries the UKCA mark, confirming conformity with applicable European safety and environmental requirements. Compliance with the standard IEC/EN 60947-4-2 ensures reliability and functionality in industrial use.

Application areas
The device is designed for industrial applications, particularly in machines with mechanical drives, such as conveyor belts, pumps, fans, compressors, packaging machines and door drives. It is suitable for systems where smooth start-up and shut-down are required to avoid damage to mechanical components.

Additional functions
The integrated network monitoring and temperature monitoring ensure safe operation. The alarm outputs enable integration into higher-level control systems. The W3 circuit expands application possibilities in complex system structures.

Device type and identification
The device type GF 9016 is specifically designed for use in three-phase networks with 400 V and motor powers up to 22 kW. The variant described here is designed for 15 kW and meets the manufacturer's technical specifications. The width of 45 mm is standardized for this power class.

Connection and control
Control is performed via signal inputs X2 (Start/Stop) and X3 (Kickstart). Outputs X5/X6 and X7/X8 serve for fault and status indication. Supply voltage is connected via L1, L2, L3, motor voltage via T1, T2, T3. Terminal designations are detailed in the datasheet.

Fault diagnosis
The yellow LED blinks in a specific pattern to indicate faults. A blink frequency of 1x per second indicates a supply voltage fault or insufficient load. 2x blinking indicates overload or excessive heatsink temperature. 3x blinking indicates an electronic fault. 4x and 5x blinking indicate ignition faults in phases 1 and 3 respectively. 6x and 7x blinking indicate faults in motor phases or defective power semiconductors. 8x blinking indicates a general synchronization fault.

Operational safety
The integrated network and temperature monitoring ensure safe operation. The alarm outputs enable connection to external monitoring systems. Conformity with IEC/EN 60947-4-2 ensures reliability in industrial use.

Approvals
The device carries the UKCA mark, confirming conformity with applicable European safety and environmental requirements. Compliance with the standard IEC/EN 60947-4-2 ensures reliability and functionality in industrial use.

Application areas
The device is designed for industrial applications, particularly in machines with mechanical drives, such as conveyor belts, pumps, fans, compressors, packaging machines and door drives. It is suitable for systems where smooth start-up and shut-down are required to avoid damage to mechanical components.

Additional functions
The integrated network monitoring and temperature monitoring ensure safe operation. The alarm outputs enable integration into higher-level control systems. The W3 circuit expands application possibilities in complex system structures.

Device type and identification
The device type GF 9016 is specifically designed for use in three-phase networks with 400 V and motor powers up to 22 kW. The variant described here is designed for 15 kW and meets the manufacturer's technical specifications. The width of 45 mm is standardized for this power class.

Connection and control
Control is performed via signal inputs X2 (Start/Stop) and X3 (Kickstart). Outputs X5/X6 and X7/X8 serve for fault and status indication. Supply voltage is connected via L1, L2, L3, motor voltage via T1, T2, T3. Terminal designations are detailed in the datasheet.

Fault diagnosis
The yellow LED blinks in a specific pattern to indicate faults. A blink frequency of 1x per second indicates a supply voltage fault or insufficient load. 2x blinking indicates overload or excessive heatsink temperature. 3x blinking indicates an electronic fault. 4x and 5x blinking indicate ignition faults in phases 1 and 3 respectively. 6x and 7x blinking indicate faults in motor phases or defective power semiconductors. 8x blinking indicates a general synchronization fault.

Operational safety
The integrated network and temperature monitoring ensure safe operation. The alarm outputs enable connection to external monitoring systems. Conformity with IEC/EN 60947-4-2 ensures reliability in industrial use.

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to22 kW
Load voltage up to3AC 400 V
Width45 mm, 52,5 mm
TypeGF 9016
Signalling outputYes
Variant
Auxiliary voltageWithout
Mains / motor voltage3AC 400 V
Nominal motor power15 kW
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0059710, EAN: 4030641597108

Questions & answers

What is the delivery time of Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device?

The article Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0059710 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device always at the best possible price. We can give you a discount of 2% on Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device we can offer you a price of 586,97 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft starter
Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft start device
614,63 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0059710 GF9016 3AC50/60Hz 400V 15kW soft starter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 9 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.