Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V
|
1.929,50 EUR |
|||||||||||
|
( 2.296,11 EUR incl. VAT ) ≈ £1,614.99 | ≈ $2,120.52 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1001895 | ||||||||||
| Mfg Part No: | 0059387 | ||||||||||
| UPC/EAN: | 4030641593872 | ||||||||||
| Weight: | 2.62 kg | ||||||||||
| Type: | GB9034/1101 100A AC50/60HZ 200-690V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0059387:
Applications
This motor brake device is suitable for drives in woodworking, the textile industry, centrifuges, sawing machines, and conveyor systems. It is used wherever rapid and secure braking is required to ensure operational safety and process control. The application is particularly relevant in systems where uncontrolled motor run-down could cause damage or hazards.
Functions and Equipment in Detail
The device features automatic standstill monitoring, which monitors the motor status and switches off the braking current once standstill is reached. In case of standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time of 320 seconds. The braking current is adjustable up to a maximum of 600 A, with the current type having a rated braking current of 100 A. The braking time is also adjustable and can extend up to 320 seconds. An external brake contactor is required, as the device does not include an integrated brake contactor for this current rating.
Technology Explained Simply
DC braking is performed via single-phase rectification, which converts alternating voltage into direct voltage, which then flows through the motor windings. This generates a braking torque that controls the motor’s deceleration. The safety time between switching off the motor contactor and switching on the brake contactor prevents induced voltages from damaging the power section. The control terminals are plug-in, enabling flexible and secure wiring. Temperature monitoring is performed via an optional thermistor input, which monitors the motor or cooling body condition.
Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing systems. It optionally supports star-delta control, allowing use with motors having corresponding starting circuits. Control is performed via terminals 6-7 (starter contact) and 8-9 (interlock for motor contactor). Control of the external brake contactor is via terminals 1-2. An alarm output is integrated, which activates in case of faults or standstill notifications.
Mounting and Installation
Mounting is done in an enclosure, with the supply voltage connected to terminals L1-L2. The auxiliary voltage of AC 230 V is required if the wide voltage range (200–690 V) is used. Terminals U, V, and W are used to connect to the motor. The ready LED indicates that the supply voltage is present. The device functions are controlled via terminals 6-7 (start) and 8-9 (interlock). The connection terminals are plug-in, enabling easy and secure installation.
Advantages in Operation
The motor brake device offers higher safety through shorter run-down times and avoids mechanical wear. Its maintenance-free operation reduces maintenance effort. The adjustability of braking current and braking time allows application-specific adaptation. The integrated standstill monitoring and alarm output enhance operational safety. Compliance with the standard IEC/EN 60947-4-2 ensures reliability and safety in industrial use. The UKCA approval confirms conformity with applicable European safety requirements.
| Technical data | |
| Braking current adjustable up to max. | 600 A |
| Braking time adjustable up to max. | 320 s |
| Width | 110 mm |
| Type | GB 9034 |
| Automatic standstill monitoring | |
| External brake contactor required | |
| Signalling output | |
| Temperature monitoring | |
| Variant | |
| Auxiliary voltage | AC 230 V |
| Braking current | 100 A |
| Nominal voltage | AC 200 - 690 V |
| Approvals and Markings | UKCA |
| Variant | Wide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals |
Questions & answers
What is the delivery time of Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V?
The article Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0059387 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V always at the best possible price. We can give you a discount of 2% on Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake device UH AC230V we can offer you a price of 1.842,67 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

