Dold 0059387, EAN: 4030641593872

Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake unit UH AC230V

Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake unit UH AC230V

Lieske Part No. 1001895
Mfg Part No 0059387
EAN-Code 4030641593872
Manufacturer Dold
Here only 1.929,50 EUR
2.296,11 EUR incl. VAT

Further information for Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake unit UH AC230V

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageAC 230 V
Braking current100 A
Nominal voltageAC 200 - 690 V
Approvals and MarkingsUKCA
VariantWide voltage input (UN = 200 ... 690 V). Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is used for wear-free braking of three-phase and alternating current asynchronous motors. It is employed in drive systems that must be reliably braked for safety and functional reasons. The device enables precise control of the braking process through adjustable parameters and integrated monitoring functions. Braking is achieved via DC braking with single-phase rectification, where the braking current is applied to the motor stator winding via terminals U and V. The auxiliary voltage is AC 230 V, and the rated voltage ranges from AC 200 to 690 V, allowing application in various industrial voltage environments. The width of the device is 110 mm, enabling compact mounting in enclosures.

Applications
This motor brake device is suitable for drives in woodworking, the textile industry, centrifuges, sawing machines, and conveyor systems. It is used wherever rapid and secure braking is required to ensure operational safety and process control. The application is particularly relevant in systems where uncontrolled motor run-down could cause damage or hazards.

Functions and Equipment in Detail
The device features automatic standstill monitoring, which monitors the motor status and switches off the braking current once standstill is reached. In case of standstill-dependent braking, a potential-free alarm contact signals if the motor has not come to a stop within the maximum braking time of 320 seconds. The braking current is adjustable up to a maximum of 600 A, with the current type having a rated braking current of 100 A. The braking time is also adjustable and can extend up to 320 seconds. An external brake contactor is required, as the device does not include an integrated brake contactor for this current rating.

Technology Explained Simply
DC braking is performed via single-phase rectification, which converts alternating voltage into direct voltage, which then flows through the motor windings. This generates a braking torque that controls the motor’s deceleration. The safety time between switching off the motor contactor and switching on the brake contactor prevents induced voltages from damaging the power section. The control terminals are plug-in, enabling flexible and secure wiring. Temperature monitoring is performed via an optional thermistor input, which monitors the motor or cooling body condition.

Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing systems. It optionally supports star-delta control, allowing use with motors having corresponding starting circuits. Control is performed via terminals 6-7 (starter contact) and 8-9 (interlock for motor contactor). Control of the external brake contactor is via terminals 1-2. An alarm output is integrated, which activates in case of faults or standstill notifications.

Mounting and Installation
Mounting is done in an enclosure, with the supply voltage connected to terminals L1-L2. The auxiliary voltage of AC 230 V is required if the wide voltage range (200–690 V) is used. Terminals U, V, and W are used to connect to the motor. The ready LED indicates that the supply voltage is present. The device functions are controlled via terminals 6-7 (start) and 8-9 (interlock). The connection terminals are plug-in, enabling easy and secure installation.

Advantages in Operation
The motor brake device offers higher safety through shorter run-down times and avoids mechanical wear. Its maintenance-free operation reduces maintenance effort. The adjustability of braking current and braking time allows application-specific adaptation. The integrated standstill monitoring and alarm output enhance operational safety. Compliance with the standard IEC/EN 60947-4-2 ensures reliability and safety in industrial use. The UKCA approval confirms conformity with applicable European safety requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001895
qrcode für Dold 0059387 GB9034/1101 100A AC50/60Hz 200-690V motor brake unit UH AC230V