Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device

Your rating:
Average rating
product review for Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device
( 5 / 5 ) 1 ratings
Dold 0059335
This image may differ from the desired article.
528,65 EUR
( 629,09 EUR incl. VAT )
≈ £442.48  |  ≈ $580.99
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device
Datasheet:file_download Download
Lieske Part No.:1002142
Mfg Part No: 0059335
UPC/EAN: 4030641593353
Weight:1 kg
Type:GF9016 3AC50/60HZ 400V 11KW
Graduated prices net
From piecesPrice per pieces
3504,86 EUR
6481,07 EUR
9457,28 EUR
12433,49 EUR

Product information for Dold 0059335:

The soft starter GF 9016 from Dold is an electronic control device for smooth start-up and shut-down of three-phase asynchronous motors. It reduces mechanical stress in the drive system and relieves the supplying network by reducing inrush currents. The device operates with a 2-phase motor control via power semiconductors (thyristors), enabling currents and motor torque to increase gradually. This ensures a jerk-free start-up, increasing the service life of motors and mechanical drive components. After start-up, the power semiconductors are bypassed via internal relay contacts to minimize power losses in the device. The soft shut-down function extends the natural coast-down time to avoid abrupt stopping of the drive.

Applications
This device is suitable for drives with gear, belt, or chain transmission, particularly in systems such as conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines, and door drives. It is designed for 3-phase asynchronous motors operated at a supply voltage of 3AC 400 V. The maximum motor power is up to 22 kW, with the current variant designed for a motor with a rated power of 11 kW.

Functions and Equipment in Detail
The device offers separate adjustment options for start-up and shut-down time, as well as for start-up voltage. Optionally, a kick-start function can be activated, providing a short impulse at the beginning of start-up to ensure the motor starts reliably. Control is performed without auxiliary voltage, simplifying installation. The W3 circuit configuration is possible, enabling flexible connection to existing systems. An alarm output is integrated, which can be used for monitoring the operating status.

Technology Explained Simply
The phase-cut control via thyristors enables controlled voltage regulation on two motor phases. This allows the motor torque to be built up gradually, minimizing mechanical stress. Network monitoring and temperature monitoring ensure safe operation. In case of faults, a yellow LED blinks at a specific frequency indicating the fault code. A green LED indicates the ready-to-operate status. The fault codes include supply voltage faults, overload, electronic faults, ignition faults in phases, and motor phase faults.

Compatibility and Accessories
The device is designed for 3-phase motors up to 22 kW at 400 V. It complies with the standard IEC/EN 60947-4-2. The width is 45 mm for motors up to 15 kW and 52.5 mm for motors up to 22 kW. The terminal designation includes supply voltage, control for bypassing, ignition pulse generator, ramp control, and signal outputs for fault and device bypass. The terminals are clearly labeled to facilitate easy installation.

Mounting and Installation
Mounting is done in an enclosure or distribution. The width of 52.5 mm (for 11 kW) allows for space-saving installation. The terminals are intended for connection to supply and motor voltages, as well as for control inputs and outputs. The terminal designation is detailed in the data sheet. Installation is performed without auxiliary voltage, simplifying wiring.

Operational Advantages
Smooth start-up and shut-down reduce wear on motors and mechanical components. The service life of drive parts is extended. Network relief through reduced inrush currents protects the supply infrastructure. Simple mounting and space-saving installation facilitate integration into existing systems. Integrated network and temperature monitoring, along with fault indication via LED signals, enable quick diagnosis during operation.

Approvals and Markings
The device carries the UKCA marking, confirming compliance with applicable European safety and performance requirements. Compliance with the standard IEC/EN 60947-4-2 ensures reliability and safety in industrial use.

Device Type and Identification
The device type is GF 9016. Identification is done by specifying the supply voltage (3AC 400 V), motor power (11 kW), and frequency (50/60 Hz). The width of 52.5 mm is intended for motors up to 22 kW, which includes the current variant.

Terminals and Signal Outputs
The terminal designation includes supply voltage (L1, L2, L3), motor voltage (T1, T2, T3), start/stop input (X2), kick-start input (X3), 0-V input (X4), and alarm outputs for fault (X5, X6) and device bypass (X7, X8). The signal outputs enable integration into higher-level control systems.

Fault Diagnosis
The yellow LED blinks at a specific frequency indicating one of eight fault codes. These include supply voltage faults, overload, electronic faults, ignition faults in phases, and motor phase faults. The green LED indicates the ready-to-operate status. The fault codes allow for quick identification of faults during operation.

Operational Safety
Integrated network and temperature monitoring ensure safe operation. In case of critical temperatures or voltage failures, the device is switched off to prevent damage. Fault indication via LED signals enables quick response to malfunctions.

Application Areas
The device is suitable for a wide range of industrial drives, particularly in conveyor technology, packaging industry, woodworking, and systems with pumps, fans, and compressors. Reducing inrush currents protects supply networks and extends the service life of drive components.

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to22 kW
Load voltage up to3AC 400 V
Width45 mm, 52,5 mm
TypeGF 9016
Signalling outputYes
Variant
Auxiliary voltageWithout
Mains / motor voltage3AC 400 V
Nominal motor power11 kW
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0059335, EAN: 4030641593353

Questions & answers

What is the delivery time of Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device?

The article Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0059335 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device always at the best possible price. We can give you a discount of 2% on Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device we can offer you a price of 504,86 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft starter
Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft start device
528,65 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0059335 GF9016 3AC50/60Hz 400V 11kW soft starter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
1 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.