Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device

Your rating:
Average rating
product review for Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device
( 5 / 5 ) 2 ratings
Dold 0058168
This image may differ from the desired article.
2.219,91 EUR
( 2.641,69 EUR incl. VAT )
≈ £1,858.06  |  ≈ $2,439.68
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device
Datasheet:file_download Download
Lieske Part No.:1001877
Mfg Part No: 0058168
UPC/EAN: 4030641581688
Weight:3.62 kg
Type:GB9034 200A AC50/60HZ 400V
Graduated prices net
From piecesPrice per pieces
22.120,01 EUR
42.020,12 EUR
61.920,22 EUR
81.820,33 EUR

Product information for Dold 0058168:

The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is used in drives that must be reliably braked for safety and functional reasons, for example in sawmills, centrifuges, woodworking machines, textile machines or conveyor systems. The device enables precise and controlled braking through DC braking with single-phase rectification, where the braking current is applied to the stator winding of the motor via terminals U and V. Braking occurs after switching off the motor contactor, with a safety time being observed to avoid induced voltages that could damage the power section.

Applications
This braking device is designed for industrial applications where rapid and safe stopping of the motor is required. It is suitable for all asynchronous motors and is particularly used in systems where short coast-down times are necessary for safety or process optimization. The device variant with 200 A braking current is designed for motors with corresponding power and can be easily integrated into existing systems.

Functions and equipment in detail
The device features automatic standstill monitoring, which detects motor standstill and accordingly switches off the braking current. The braking time is adjustable up to a maximum of 320 seconds, with the user being able to choose between time-dependent and standstill-dependent braking. In standstill-dependent braking, a potential-free signaling contact indicates if the motor has not come to a stop within the maximum braking time. Additionally, temperature monitoring is integrated, which monitors heat development via a motor PTC sensor (optional).

Technology explained simply
DC braking is achieved via single-phase rectification, which converts alternating voltage into direct voltage to brake the motor via the stator winding. The braking current strength is adjustable up to 600 A, with the current variant having a rated value of 200 A. The supply voltage is connected to terminals L1 and L2, with the rated voltage being AC 400 V. An external brake contactor is required, as the device itself does not include an integrated brake contactor for this current strength. Control of the external brake contactor is performed via contact 1–2, which is timed so that the motor contactor has fully dropped out before the braking current flows.

Compatibility and accessories
The device is specified according to IEC/EN 60947-4-2 and carries the UKCA mark. It is designed for use in industrial environments and can be combined with optional features such as star-delta starting, thermistor motor protection, or a wide voltage range (200–690 V). The width is 110 mm, enabling compact mounting in enclosures. Control is performed via a start button, with the ready LED indicating that the supply voltage is present and the device is operational.

Mounting and installation
Mounting is done in an enclosure, with terminals L1–L2 connected to the supply voltage. The interlock contacts (8–9) ensure that the motor contactor can only be switched on when the brake contactor is switched off. The connection terminals are clearly labeled, with terminals 1–2 designated for the external brake contactor. The safety time between switching off the motor contactor and switching on the brake contactor is predefined in the device electronics to prevent damage from induced voltages.

Advantages in operation
Due to the wear- and maintenance-free design, the service life of the device is extended and maintenance effort is reduced. The shorter coast-down time increases the safety and economic efficiency of the system. Adjustable parameters such as braking current and braking time allow individual adaptation to the specific requirements of each application. The integrated standstill monitoring and signaling output ensure reliable monitoring of the braking process and enable quick fault detection.

Technical data
Braking current adjustable up to max.600 A
Braking time adjustable up to max.320 s
Width110 mm
TypeGB 9034
Automatic standstill monitoringYes
External brake contactor requiredYes
Signalling outputYes
Temperature monitoringYes
Variant
Auxiliary voltageWithout
Braking current200 A
Nominal voltageAC 400 V
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0058168, EAN: 4030641581688

Questions & answers

What is the delivery time of Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device?

The article Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0058168 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device always at the best possible price. We can give you a discount of 2% on Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device we can offer you a price of 2.120,01 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake unit
Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake device
2.219,91 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0058168 GB9034 200A AC50/60Hz 400V motor brake unit
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 2 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.