Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay
|
263,30 EUR |
|||||||||||
|
( 313,33 EUR incl. VAT ) ≈ £220.38 | ≈ $289.37 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1312717 | ||||||||||
| Mfg Part No: | 0056951 | ||||||||||
| UPC/EAN: | 4030641569518 | ||||||||||
| Weight: | 0.31 kg | ||||||||||
| Type: | BA9053/010 AC1,5-15A AC230V 0-100S | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0056951:
Applications
This relay is intended for use in industrial plants and rail transport, where it monitors the current consumption of motors, transformers, or other loads. It enables early detection of overloads or undercurrent conditions to prevent failures. The function as an overcurrent relay is standard, but it can also be used as an undercurrent relay, with hysteresis dependent on the setpoint. The device is installed in enclosures, with a width of 45 mm allowing compact mounting in standard control panels.
Functions and Equipment in Detail
The device features 2 changeover contacts as output contacts, galvanically isolated from the measuring circuit. The auxiliary voltage is AC 230 V, supplied via the network. The measuring ranges cover AC 1.5 to 15 A, with the measured value determined as the arithmetic mean of the rectified current. The devices are calibrated for sinusoidal AC currents in RMS value. Settings are adjusted via rotary switches, allowing both the pickup value and the drop-out value (hysteresis) to be configured.
Technology Explained Simply
The switching delay is 0 to 100 seconds and is activated once the set threshold is exceeded. This delay prevents false alarms caused by short-term current peaks, such as those occurring during motor start-up. The pickup delay is also integrated, so the relay does not react immediately but includes a short delay to filter disturbances. LED indicators signal the operating status: a green LED lights up when auxiliary voltage is applied, and a yellow LED indicates the activated output relay. Galvanic isolation between the auxiliary circuit and measuring circuit ensures safe and interference-free signal transmission.
Compatibility and Accessories
The relay complies with IEC/EN 60255-1 and IEC/EN 60947-1 standards. Certifications UKCA and CCC are available, enabling use in respective markets. It is designed for mounting in enclosures and can be ordered in various versions with different measuring ranges and functions (e.g., with start-up bypass or memory behavior). The variant described here does not include a start-up bypass.
Mounting and Installation
Mounting is performed in standard enclosures with a width of 45 mm. The terminal connections are clearly labeled: A1/A2 for auxiliary voltage, i/k for current input, and contacts 11-14 and 21-24 for the two changeover contacts. Installation requires no special tools; settings are adjusted directly on the front of the device. The terminals are designed for connection with wires, with maximum permissible currents and voltages conforming to technical specifications.
Operational Advantages
Continuous monitoring and the possibility of preventive maintenance increase operational reliability. Rapid fault localization enables efficient maintenance. High overload capacity and a measuring frequency up to 5 kHz ensure reliable operation even under demanding conditions. LED indicators provide a quick visual overview of the operating status, simplifying maintenance. Galvanic isolation between measuring and auxiliary circuits enhances safety and prevents interference in the control circuit.
| Technical data | |
| 1- / 3-phase | 1 |
| Enclosure design | Switch cabinet |
| Output contacts | 2 C/O contacts |
| Width | 45 mm |
| Type | BA 9053 |
| Operate delay | |
| Variant | |
| Auxiliary voltage | AC 230 V |
| Contact equipping | 2 changeover contacts |
| Measuring range | AC 1,5 - 15 A |
| Start up delay | Without |
| Switching delay | 0 - 100 s |
| Approvals and Markings | UKCA, CCC |
| Variant | Overcurrent relay. Energized on trip. Time delay at response value |
Questions & answers
What is the delivery time of Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay ?
The article Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0056951 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay always at the best possible price. We can give you a discount of 2% on Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0056951 BA9053/010 AC1,5-15A AC230V 0-100S current relay we can offer you a price of 261,33 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

