Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ
|
240,36 EUR |
|||||||||||
|
( 286,03 EUR incl. VAT ) ≈ £201.18 | ≈ $264.16 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1001719 | ||||||||||
| Mfg Part No: | 0056235 | ||||||||||
| UPC/EAN: | 4030641562359 | ||||||||||
| Weight: | 0.172 kg | ||||||||||
| Type: | IL5880.12 DC24V | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Dold 0056235:
Applications
The insulation monitor is suitable for pure AC and DC networks in the frequency range of 10 to 10000 Hz. It is particularly used in industrial plants, railway applications, and systems with mobile power generators, where high safety and reliability of electrical installations are required. The ability to monitor even de-energized networks allows testing of consumers that must be switched on in emergencies, such as motor windings.
Functions and Features in Detail
The device features two changeover contacts as contact configuration, which can be used to trigger alarm signals or switching operations. The function of the output relays is programmable, allowing selection between memory and hysteresis behavior. Programming is performed via connections LT1 and LT2, where bridging these connections activates the hysteresis behavior. Additionally, external reset and test buttons can be connected, facilitating integration into existing monitoring systems. The LED indicators signal operational readiness (green LED), insulation fault (red LED), and for variants with a pre-alarm threshold, also the pre-alarm state (yellow LED). In this variant, no pre-alarm threshold is included.
Technology Explained Simply
The insulation monitor measures the resistance between the electrical network and ground. If this resistance falls below the set alarm threshold, a fault is detected and signaled via the LEDs and relay contacts. The galvanic isolation between the measuring circuit, auxiliary voltage, and output contacts ensures high safety and prevents interference in the monitored system. The trigger value is adjusted via a potentiometer located directly on the front of the device, enabling user-friendly adaptation to specific requirements.
Compatibility and Accessories
The device is designed for IT systems with a nominal voltage of AC 0 to 500 V and can be used in various application areas, including industrial and railway applications. It is available in various housing designs, with the IL5880.12 DC24V variant designed for installation distributors. Mounting is possible either on DIN rails or by screws. The width of 35 mm allows flexible placement in standard distributor enclosures. The devices are certified with UKCA and CCC approvals, enabling use in corresponding markets.
Mounting and Installation
Mounting is performed in installation distributors according to DIN 43880. The connection terminals are located at the bottom of the device, enabling easy wiring. The auxiliary voltage is supplied via connections A1 and A2, while the lines to be monitored are connected to L and N. The protective earth conductor is connected to PE. Relay function programming is performed via connections LT1 and LT2. The LED indicators allow visual inspection of the operating status.
Advantages in Operation
The insulation monitor provides preventive fire and system protection through early detection of insulation faults. The simple adjustment of trigger values and clear LED indication simplify maintenance and monitoring. Galvanic isolation and the residual current principle enhance the safety and reliability of the device. The ability to connect external buttons enables flexible integration into existing systems. Monitoring even when the network is de-energized extends the application range to applications where electrical power is temporarily switched off.
| Technical data | |
| Enclosure design | Distribution board |
| IMD type | AC |
| Nominal voltage IT system | AC 0 - 500 V |
| Response value | 5 - 500 kΩ |
| Response value type | Adjustable |
| Width | 35 mm |
| Type | IL 5880 |
| Earth fault indicator | |
| Variant | |
| Alarm value | 5 - 100 kOhm |
| Auxiliary voltage | DC 24 V |
| Contact equipping | 2 changeover contacts |
| Prewarning value | Without |
| Approvals and Markings | UKCA, CCC |
| Variant | Adjustable alarm value. De-energized on trip |
Questions & answers
What is the delivery time of Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ?
The article Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0056235 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ always at the best possible price. We can give you a discount of 2% on Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0056235 IL5880.12 DC24V insulation monitor 5–100 kΩ we can offer you a price of 229,54 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

