Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s

Your rating:
Average rating
product review for Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s
( 4.5 / 5 ) 2 ratings
Dold 0055535
This image may differ from the desired article.
146,09 EUR
( 173,85 EUR incl. VAT )
≈ £122.28  |  ≈ $160.55
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s
Datasheet:file_download Download
Lieske Part No.:115371
Mfg Part No: 0055535
UPC/EAN: 4030641555351
Weight:0.078 kg
Type:IK9065.11/100 3AC400V 0,4-8A
Graduated prices net
From piecesPrice per pieces
5139,52 EUR
10132,94 EUR
15126,37 EUR
20119,79 EUR

Product information for Dold 0055535:

The underload monitor IK9065.11/100 3AC400V 0,4-8A from Dold is an industrial monitoring switch for detecting underload and no-load conditions in asynchronous motors. The device monitors the phase shift between current and voltage (cos ϕ), which changes with the motor load. This measurement method enables reliable monitoring independent of motor size and is particularly suitable for applications such as fan monitoring (e.g. in case of belt breakage), filter monitoring (in case of blockage) or centrifugal pump monitoring (in case of valve closure or dry running). The device is designed for use in industrial and railway applications and complies with the standard EN 60255-1.

Applications

The underload monitor is intended for monitoring single- and three-phase alternating and rotating current loads, particularly asynchronous motors. It is direction-independent and can also be used for general cos ϕ monitoring. The direct connection capability for motors with a rated current of up to approximately 5 A (at 3AC 400 V, corresponding to a motor power of 1.5 to 2.2 kW) makes it especially suitable for smaller drives. For higher currents, an external current transformer can be connected.

Functions and equipment in detail

The device features 1 changeover contact as output contact and operates without auxiliary voltage. The response delay is adjustable in the range of 1 to 100 seconds, allowing adaptation to different system conditions. The response value for cos ϕ is also adjustable. If the set cos ϕ value is undershot for the duration of the set delay time, the output relay is switched to alarm position and the red ALARM LED lights up. The operating mode is programmable: it can be set to automatic reset (Alarm Auto Reset) or latched alarm (Latched Alarm). Additionally, the idle / active current principle is switchable, with the device operating standardly in idle current mode (output relay not activated in fault condition). An integrated RESET button and the possibility of remote RESET are included.

Technology explained simply

The operation is based on measuring the phase shift between voltage and current. At low load (underload or no-load), the cos ϕ value changes, which is detected by the device. The measurement is performed via the current path L1-L1', which directly evaluates currents up to 8 A. The connection terminals are located at the bottom, enabling installation in installation and industrial distributors according to DIN 43880. The width is 17.5 mm, the depth 58 mm. The housing design is intended for installation distributors. The LED indicators for power supply and alarm allow quick visual status monitoring.

Compatibility and accessories

The device is designed for direct connection of motors with a rated current of up to approximately 5 A. For higher currents (above 8 A), an external current transformer can be connected. The variant SL 9065CT offers an integrated through-type transformer for currents up to 100 A, however, this is not the IK9065 variant described here. Mounting is done via DIN rail or screw mounting.

Mounting and installation

Mounting is done in installation and industrial distributors according to DIN 43880. The connection terminals are located at the bottom. When used with motors, ensure that the motor is connected to L1' and not to L1 to ensure correct phase shift measurement. For single-phase loads, terminal L3 is not connected.

Advantages in operation

By detecting underload and no-load conditions early, the underload monitor enables preventive maintenance, preventing costly damage. The operational safety and availability of the system are thus increased. The programmable operating mode (automatic reset or latched alarm) and the switchable idle / active current principle expand the range of applications. The integrated RESET function and LED indicators facilitate diagnosis and maintenance during operation.

Technical data
1- / 3-phase1, 3
Auxiliary voltageWithout
Enclosure designDistribution board
Measuring range max.8 A
Output contacts1 C/O contact
Width17,5 mm
TypeIK 9065
Variant
Contact equipping1 changeover contact
Current range0,4 - 8 A
Nominal voltage3AC 400 V
Operate delay1 - 100 s
VariantWithout auxiliary supply. Manual reset programmable. Selection de-energized or energized on trip


Product data sheet
Datasheet for Dold 0055535, EAN: 4030641555351

Questions & answers

What is the delivery time of Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s?

The article Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0055535 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s always at the best possible price. We can give you a discount of 2% on Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s we can offer you a price of 139,52 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s
Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s
146,09 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0055535 IK9065.11/100 3AC400V 0.4-8A underload monitor Tv=1-100s
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.